[PATCH] leds: lm3692x: fix regulator/gpio leak and wrong enabled state on last write failure

[Cong Nguyen <congnt264@gmail.com>]

Every write in lm3692x_leds_enable() checks its return and jumps to
out: on failure -- except the last one, which falls through and sets
led->enabled = true regardless of whether it actually succeeded. Leaks
the regulator on a failing probe, and short-circuits later
brightness_set() calls without retrying.

Route it through out: like every other write here, and only set
enabled = true once it succeeds.

Fixes: 260718b3a35d ("leds: lm3692x: Disable chip on brightness 0")
Assisted-by: Claude:claude-opus-4
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
---
 drivers/leds/leds-lm3692x.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/leds-lm3692x.c b/drivers/leds/leds-lm3692x.c
index 8d2678dc9e4f..9c58d54c5783 100644
--- a/drivers/leds/leds-lm3692x.c
+++ b/drivers/leds/leds-lm3692x.c
@@ -276,9 +276,11 @@ static int lm3692x_leds_enable(struct lm3692x_led *led)
 
 	ret = regmap_update_bits(led->regmap, LM3692X_EN, LM3692X_ENABLE_MASK,
 				 enable_state | LM3692X_DEVICE_EN);
+	if (ret)
+		goto out;
 
 	led->enabled = true;
-	return ret;
+	return 0;
 out:
 	dev_err(&led->client->dev, "Fail writing initialization values\n");
 
-- 
2.25.1