From: Aldo Ariel Panzardo <qwe.aldo@gmail.com>
To: Jiri Kosina <jikos@kernel.org>, Benjamin Tissoires <bentiss@kernel.org>
Cc: Ping Cheng <ping.cheng@wacom.com>,
Jason Gerecke <jason.gerecke@wacom.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org, Aldo Ariel Panzardo <qwe.aldo@gmail.com>
Subject: [PATCH v3] HID: wacom: avoid overflows in sequence number tracking
Date: Tue, 15 Sep 2026 11:52:29 -0300 [thread overview]
Message-ID: <20260915145229.3036596-1-qwe.aldo@gmail.com> (raw)
In-Reply-To: <20260915111448.2726869-1-qwe.aldo@gmail.com>
The dropped-packet calculation derives the sequence range in signed int
arithmetic. A sequence field whose logical range spans all 32-bit values
makes the range calculation wrap to zero, so the following modulo triggers
a divide exception.
Normalize the maximum and current value according to the HID parser's
signedness rule, and keep the sequence state and arithmetic in s64. Use
div64_s64() for the remainder to avoid __moddi3 link failures on 32-bit
architectures. This also avoids overflowing value + 1 at the logical
maximum.
Fixes: 359673ea3a20 ("HID: wacom: Support sequence numbers smaller than 16-bit")
Cc: stable@vger.kernel.org
Signed-off-by: Aldo Ariel Panzardo <qwe.aldo@gmail.com>
---
Changes in v3:
- Replace raw s64 modulo with div64_s64()-based remainder to avoid
__moddi3 link failure on 32-bit architectures (i386, arm32).
Reported by Sashiko AI review.
Changes in v2:
- Normalize logical_maximum/value as unsigned when logical_minimum >= 0,
matching HID parser signedness. Store sequence state as s64.
Fixes unsigned 0..UINT32_MAX range that broke v1.
drivers/hid/wacom_wac.c | 33 ++++++++++++++++++++++++---------
drivers/hid/wacom_wac.h | 2 +-
2 files changed, 25 insertions(+), 10 deletions(-)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index da1f0ea856..af94f59a5d 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -7,6 +7,7 @@
#include "wacom.h"
#include <linux/input/mt.h>
#include <linux/jiffies.h>
+#include <linux/math64.h>
/* resolution for penabled devices */
#define WACOM_PL_RES 20
@@ -2527,18 +2528,33 @@ static void wacom_wac_pen_event(struct hid_device *hdev, struct hid_field *field
case WACOM_HID_WD_BARRELSWITCH3:
wacom_wac->hid_data.barrelswitch3 = value;
return;
- case WACOM_HID_WD_SEQUENCENUMBER:
- if (wacom_wac->hid_data.sequence_number != value &&
+ case WACOM_HID_WD_SEQUENCENUMBER: {
+ s64 sequence_minimum = field->logical_minimum;
+ s64 sequence_maximum = sequence_minimum < 0 ?
+ (s64)field->logical_maximum :
+ (s64)(u32)field->logical_maximum;
+ s64 sequence_value = sequence_minimum < 0 ?
+ (s64)value : (s64)(u32)value;
+
+ if (wacom_wac->hid_data.sequence_number != sequence_value &&
wacom_wac->hid_data.sequence_number >= 0) {
- int sequence_size = field->logical_maximum - field->logical_minimum + 1;
- int drop_count = (value - wacom_wac->hid_data.sequence_number) % sequence_size;
- hid_warn(hdev, "Dropped %d packets", drop_count);
+ s64 sequence_size = sequence_maximum -
+ sequence_minimum + 1;
+ s64 drop_count = sequence_value -
+ wacom_wac->hid_data.sequence_number;
+
+ drop_count -= div64_s64(drop_count, sequence_size) *
+ sequence_size;
+ if (drop_count < 0)
+ drop_count += sequence_size;
+ hid_warn(hdev, "Dropped %lld packets",
+ (long long)drop_count);
}
- wacom_wac->hid_data.sequence_number = value + 1;
- if (wacom_wac->hid_data.sequence_number > field->logical_maximum)
- wacom_wac->hid_data.sequence_number = field->logical_minimum;
+ if (sequence_value >= sequence_maximum)
+ wacom_wac->hid_data.sequence_number = sequence_minimum;
+ else
+ wacom_wac->hid_data.sequence_number = sequence_value + 1;
return;
}
+ }
/* send pen events only when touch is up or forced out
* or touch arbitration is off
diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
index 126bec6e5c..74e7c5a04a 100644
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -324,7 +324,7 @@ struct hid_data {
int bat_connected;
int ps_connected;
bool pad_input_event_flag;
- int sequence_number;
+ s64 sequence_number;
ktime_t time_delayed;
};
--
2.43.0
next prev parent reply other threads:[~2026-09-15 14:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-15 11:14 [PATCH] HID: wacom: avoid overflows in sequence number tracking Aldo Ariel Panzardo
2026-09-15 14:16 ` [PATCH v2] " Aldo Ariel Panzardo
2026-09-15 14:27 ` sashiko-bot
2026-09-16 18:13 ` kernel test robot
2026-09-17 5:06 ` kernel test robot
2026-09-15 14:52 ` Aldo Ariel Panzardo [this message]
[not found] <20260915145229.3069117-1-qwe.aldo@gmail.com>
2026-10-09 3:01 ` [PATCH v3] " Aldo Ariel Panzardo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260915145229.3036596-1-qwe.aldo@gmail.com \
--to=qwe.aldo@gmail.com \
--cc=bentiss@kernel.org \
--cc=jason.gerecke@wacom.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ping.cheng@wacom.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.