From: Triet Hoang <triet.hoang.dev@gmail.com>
To: sashiko-bot@kernel.org
Cc: linux-watchdog@vger.kernel.org, sashiko-reviews@lists.linux.dev,
tzungbi@kernel.org
Subject: Re: [PATCH v3] watchdog: msc313e: Propagate error code in resume()
Date: Wed, 16 Sep 2026 11:45:57 +0700 [thread overview]
Message-ID: <20260916044557.74124-1-triet.hoang.dev@gmail.com> (raw)
In-Reply-To: <20260912164221.966851F00893@smtp.kernel.org>
Sat, 12 Sep 2026 16:42:21 +0000 Sashiko wrote:
> [Severity: High]
> This is a pre-existing issue, but does leaving the watchdog framework state
> flags intact when the clock fails to enable cause a system crash?
>
> If msc313e_wdt_start() fails, the clock remains disabled, but WDOG_ACTIVE
> and WDOG_HW_RUNNING are still set. The Linux PM core ignores device resume
> errors and proceeds with system resume.
>
> The watchdog core's PM notifier then calls watchdog_dev_resume(), which
> immediately invokes msc313e_wdt_ping(). This unconditionally writes to a
> memory-mapped register:
>
> drivers/watchdog/msc313e_wdt.c:msc313e_wdt_ping() {
> ...
> writew(1, priv->base + REG_WDT_CLR);
> return 0;
> }
>
> Can accessing these registers with the bus clock disabled on this platform
> trigger a synchronous external bus abort and a kernel panic?
>
> Additionally, a subsequent stop operation unconditionally disables the clock:
>
> drivers/watchdog/msc313e_wdt.c:msc313e_wdt_stop() {
> ...
> writew(0, priv->base + REG_WDT_CLR);
> clk_disable_unprepare(priv->clk);
> return 0;
> }
>
> Since the clock enable previously failed, would this extra
> clk_disable_unprepare() cause a clock reference count underflow warning?
Hi Tzung-Bi,
I think we can address the problem Sashiko mentioned by making the clock ownership
explicit in the driver.
If msc313e_wdt_start() fails to enable the clock, the driver should not subsequently access
the watchdog registers or call clk_disable_unprepare() as if the clock had been successfully enabled.
In particular, we can track whether the clock was successfully acquired and make ping() and stop()
operate only when the clock is enabled.
diff --git a/drivers/watchdog/msc313e_wdt.c b/drivers/watchdog/msc313e_wdt.c
index 4a5cce2a16b1..437b8ace0a00 100644
--- a/drivers/watchdog/msc313e_wdt.c
+++ b/drivers/watchdog/msc313e_wdt.c
@@ -29,6 +29,7 @@ struct msc313e_wdt_priv {
void __iomem *base;
struct watchdog_device wdev;
struct clk *clk;
+ bool clk_enabled;
};
static u32 msc313e_wdt_get_hw_timeout(struct msc313e_wdt_priv *priv)
@@ -60,6 +61,7 @@ static int msc313e_wdt_start(struct watchdog_device *wdev)
if (err)
return err;
+ priv->clk_enabled = true;
msc313e_wdt_set_hw_timeout(priv, wdev->timeout);
return 0;
}
@@ -68,6 +70,9 @@ static int msc313e_wdt_ping(struct watchdog_device *wdev)
{
struct msc313e_wdt_priv *priv = watchdog_get_drvdata(wdev);
+ if (!priv->clk_enabled)
+ return -EIO;
+
writew(1, priv->base + REG_WDT_CLR);
return 0;
}
@@ -79,7 +84,10 @@ static int msc313e_wdt_stop(struct watchdog_device *wdev)
writew(0, priv->base + REG_WDT_MAX_PRD_L);
writew(0, priv->base + REG_WDT_MAX_PRD_H);
writew(0, priv->base + REG_WDT_CLR);
- clk_disable_unprepare(priv->clk);
+ if (priv->clk_enabled) {
+ clk_disable_unprepare(priv->clk);
+ priv->clk_enabled = false;
+ }
return 0;
}
How do you think about this idea?
BR,
Triet
next prev parent reply other threads:[~2026-09-16 4:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-12 16:33 [PATCH v3] watchdog: msc313e: Propagate error code in resume() Tzung-Bi Shih
2026-09-12 16:42 ` sashiko-bot
2026-09-16 4:45 ` Triet Hoang [this message]
2026-09-16 7:10 ` Tzung-Bi Shih
2026-09-16 9:10 ` Guenter Roeck
2026-09-17 0:29 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260916044557.74124-1-triet.hoang.dev@gmail.com \
--to=triet.hoang.dev@gmail.com \
--cc=linux-watchdog@vger.kernel.org \
--cc=sashiko-bot@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=tzungbi@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.