From: Zhang Tengfei <zhtfdev@gmail.com>
To: Jiawen Wu <jiawenwu@trustnetic.com>,
Zaiyu Wang <zaiyuwang@trustnetic.com>
Cc: dev@dpdk.org, stephen@networkplumber.org,
Zhang Tengfei <zhtfdev@gmail.com>,
stable@dpdk.org
Subject: [PATCH v2 3/3] net/txgbe: fix flow create error codes
Date: Wed, 16 Sep 2026 21:11:05 +0800 [thread overview]
Message-ID: <20260916131106.105667-4-zhtfdev@gmail.com> (raw)
In-Reply-To: <20260916131106.105667-1-zhtfdev@gmail.com>
txgbe_flow_create() reports failures with rte_flow_error_set(error, -ret).
The FDIR flex offset mismatch and mask-only paths jump to that handler
with ret == 0, so the application sees a failed create and errno 0. The
global mask memcmp path stores memcmp's positive result in ret, so -ret
is negative.
Set -EINVAL on these paths.
Fixes: 5c2352b9ece6 ("net/txgbe: support creating consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Zhang Tengfei <zhtfdev@gmail.com>
---
drivers/net/txgbe/txgbe_flow.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/txgbe/txgbe_flow.c b/drivers/net/txgbe/txgbe_flow.c
index a1a497fa22..084b1eec1d 100644
--- a/drivers/net/txgbe/txgbe_flow.c
+++ b/drivers/net/txgbe/txgbe_flow.c
@@ -3388,12 +3388,12 @@ txgbe_flow_create(struct rte_eth_dev *dev,
* Only support one global mask,
* all the masks should be the same.
*/
- ret = memcmp(&fdir_info->mask,
+ if (memcmp(&fdir_info->mask,
&fdir_rule.mask,
- sizeof(struct txgbe_hw_fdir_mask));
- if (ret) {
+ sizeof(struct txgbe_hw_fdir_mask)) != 0) {
PMD_DRV_LOG(ERR, "only support one global mask");
rte_free(fdir_rule_ptr);
+ ret = -EINVAL;
goto out;
}
@@ -3402,6 +3402,7 @@ txgbe_flow_create(struct rte_eth_dev *dev,
fdir_info->flex_relative !=
fdir_rule.flex_relative) {
rte_free(fdir_rule_ptr);
+ ret = -EINVAL;
goto out;
}
}
@@ -3431,6 +3432,7 @@ txgbe_flow_create(struct rte_eth_dev *dev,
}
rte_free(fdir_rule_ptr);
+ ret = -EINVAL;
goto out;
}
--
2.53.0
next prev parent reply other threads:[~2026-09-16 13:12 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-15 15:24 [PATCH] net/txgbe: fix leak of filters on flow create Zhang Tengfei
2026-09-15 15:38 ` Stephen Hemminger
2026-09-15 15:48 ` Zhang Tengfei
2026-09-16 13:11 ` [PATCH v2 0/3] net/txgbe: fix flow create errors Zhang Tengfei
2026-09-16 13:11 ` [PATCH v2 1/3] net/txgbe: fix L2 tunnel error on flow create Zhang Tengfei
2026-09-16 13:11 ` [PATCH v2 2/3] net/txgbe: fix leak of filters " Zhang Tengfei
2026-09-16 13:11 ` Zhang Tengfei [this message]
2026-09-16 16:21 ` [PATCH v2 0/3] net/txgbe: fix flow create errors Stephen Hemminger
2026-09-17 15:32 ` [PATCH v3 " Zhang Tengfei
2026-09-17 15:32 ` [PATCH v3 1/3] net/txgbe: fix L2 tunnel error on flow create Zhang Tengfei
2026-09-17 15:32 ` [PATCH v3 2/3] net/txgbe: fix leak of filters " Zhang Tengfei
2026-09-17 15:32 ` [PATCH v3 3/3] net/txgbe: fix FDIR error handling " Zhang Tengfei
2026-09-18 16:06 ` [PATCH v3 0/3] net/txgbe: fix flow create errors Stephen Hemminger
2026-09-18 18:14 ` Zhang Tengfei
2026-09-18 18:30 ` [PATCH v4 " Zhang Tengfei
2026-09-18 18:30 ` [PATCH v4 1/3] net/txgbe: fix L2 tunnel error on flow create Zhang Tengfei
2026-09-18 18:30 ` [PATCH v4 2/3] net/txgbe: fix leak of filters " Zhang Tengfei
2026-09-18 18:30 ` [PATCH v4 3/3] net/txgbe: fix FDIR error handling " Zhang Tengfei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260916131106.105667-4-zhtfdev@gmail.com \
--to=zhtfdev@gmail.com \
--cc=dev@dpdk.org \
--cc=jiawenwu@trustnetic.com \
--cc=stable@dpdk.org \
--cc=stephen@networkplumber.org \
--cc=zaiyuwang@trustnetic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.