From: Omar Elghoul <oelghoul@linux.ibm.com>
To: linux-s390@vger.kernel.org, linux-kernel@vger.kernel.org,
kvm@vger.kernel.org
Cc: oelghoul@linux.ibm.com, hca@linux.ibm.com, gor@linux.ibm.com,
agordeev@linux.ibm.com, borntraeger@linux.ibm.com,
svens@linux.ibm.com, schnelle@linux.ibm.com,
mjrosato@linux.ibm.com, alifm@linux.ibm.com,
farman@linux.ibm.com, gbayer@linux.ibm.com, pasic@linux.ibm.com,
alex@shazbot.org
Subject: [PATCH v6 2/4] s390/pci: Reuse FMB buffer and preserve state in device re-enablement
Date: Wed, 16 Sep 2026 17:32:20 -0400 [thread overview]
Message-ID: <20260916213222.233-3-oelghoul@linux.ibm.com> (raw)
In-Reply-To: <20260916213222.233-1-oelghoul@linux.ibm.com>
Introduce the function zpci_fmb_reenable_device() that checks the state
of function measurement and ensures it is enabled. Reset the counters to
zero, disable, and re-enable the FMB if it was already enabled. Call
this function from zpci_reenable_device().
Don't free the FMB buffer during disabling and reuse it when re-enabling
measurement. Instead, free the buffer upon device teardown, allowing the
same buffer to be reused in the enable path and add the bit fmb_enabled
to struct zpci_dev. Audit the only consumer of zdev->fmb and update it
to reflect the change in semantics.
Signed-off-by: Omar Elghoul <oelghoul@linux.ibm.com>
---
arch/s390/include/asm/pci.h | 2 +
arch/s390/pci/pci.c | 75 ++++++++++++++++++++++++++++---------
arch/s390/pci/pci_debug.c | 2 +-
3 files changed, 61 insertions(+), 18 deletions(-)
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
index 88a125b92bdd..b8162f7a8968 100644
--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -175,6 +175,7 @@ struct zpci_dev {
u8 util_str_avail : 1;
u8 tid_avail : 1;
u8 rtr_avail : 1; /* Relaxed translation allowed */
+ u8 fmb_enabled : 1;
unsigned int devfn; /* DEVFN part of the RID*/
u8 pfip[CLP_PFIP_NR_SEGMENTS]; /* pci function internal path */
@@ -351,6 +352,7 @@ void zpci_remove_parent_msi_domain(struct zpci_bus *zbus);
/* FMB */
int zpci_fmb_enable_device(struct zpci_dev *);
int zpci_fmb_disable_device(struct zpci_dev *);
+int zpci_fmb_reenable_device(struct zpci_dev *zdev);
/* Debug */
int zpci_debug_init(void);
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index c055a9ad0972..5d1f5b75bff5 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -175,13 +175,18 @@ int zpci_fmb_enable_device(struct zpci_dev *zdev)
lockdep_assert_held(&zdev->fmb_lock);
- if (zdev->fmb || sizeof(*zdev->fmb) < zdev->fmb_length)
+ if (zdev->fmb_enabled || sizeof(*zdev->fmb) < zdev->fmb_length)
return -EINVAL;
- zdev->fmb = kmem_cache_zalloc(zdev_fmb_cache, GFP_KERNEL);
- if (!zdev->fmb)
- return -ENOMEM;
- WARN_ON((u64) zdev->fmb & 0xf);
+ if (!zdev->fmb) {
+ zdev->fmb = kmem_cache_zalloc(zdev_fmb_cache, GFP_KERNEL);
+ if (!zdev->fmb)
+ return -ENOMEM;
+ WARN_ON((u64) zdev->fmb & 0xf);
+ } else {
+ /* FMB buffers are intentionally persistent for later reuse */
+ memset(zdev->fmb, 0, sizeof(*zdev->fmb));
+ }
/* reset software counters */
spin_lock_irqsave(&zdev->dom_lock, flags);
@@ -199,11 +204,11 @@ int zpci_fmb_enable_device(struct zpci_dev *zdev)
fib.fmb_addr = virt_to_phys(zdev->fmb);
fib.gd = zdev->gisa;
cc = zpci_mod_fc(req, &fib, &status);
- if (cc) {
- kmem_cache_free(zdev_fmb_cache, zdev->fmb);
- zdev->fmb = NULL;
- }
- return cc ? -EIO : 0;
+ if (cc)
+ return -EIO;
+
+ zdev->fmb_enabled = 1;
+ return 0;
}
/* Modify PCI: Disable PCI function measurement */
@@ -215,7 +220,7 @@ int zpci_fmb_disable_device(struct zpci_dev *zdev)
lockdep_assert_held(&zdev->fmb_lock);
- if (!zdev->fmb)
+ if (!zdev->fmb_enabled)
return -EINVAL;
fib.gd = zdev->gisa;
@@ -224,13 +229,39 @@ int zpci_fmb_disable_device(struct zpci_dev *zdev)
cc = zpci_mod_fc(req, &fib, &status);
if (cc == 3) /* Function already gone. */
cc = 0;
+ if (cc)
+ return -EIO;
- if (!cc) {
- kmem_cache_free(zdev_fmb_cache, zdev->fmb);
- zdev->fmb = NULL;
- }
- return cc ? -EIO : 0;
+ zdev->fmb_enabled = 0;
+ return 0;
}
+EXPORT_SYMBOL_GPL(zpci_fmb_disable_device);
+
+int zpci_fmb_reenable_device(struct zpci_dev *zdev)
+{
+ u64 req = ZPCI_CREATE_REQ(zdev->fh, 0, ZPCI_MOD_FC_SET_MEASURE);
+ struct zpci_fib fib = {0};
+ u8 cc, status;
+
+ lockdep_assert_held(&zdev->fmb_lock);
+
+ if (!zdev->fmb_enabled)
+ return zpci_fmb_enable_device(zdev);
+
+ fib.gd = zdev->gisa;
+ cc = zpci_mod_fc(req, &fib, &status); /* Disable function measurement */
+
+ /* Unlike in zpci_fmb_disable_device(), cc == 3 is not a valid state here
+ * because we are re-enabling function measurement for the same function
+ * handle.
+ */
+ if (cc)
+ return -EIO;
+
+ zdev->fmb_enabled = 0;
+ return zpci_fmb_enable_device(zdev);
+}
+EXPORT_SYMBOL_GPL(zpci_fmb_reenable_device);
static int zpci_cfg_load(struct zpci_dev *zdev, int offset, u32 *val, u8 len)
{
@@ -737,9 +768,13 @@ int zpci_reenable_device(struct zpci_dev *zdev)
}
rc = zpci_iommu_register_ioat(zdev, &status);
- if (rc)
+ if (rc) {
zpci_disable_device(zdev);
+ return rc;
+ }
+ guard(mutex)(&zdev->fmb_lock);
+ zpci_fmb_reenable_device(zdev);
return rc;
}
EXPORT_SYMBOL_GPL(zpci_reenable_device);
@@ -1003,6 +1038,12 @@ void zpci_release_device(struct kref *kref)
if (zdev->has_resources)
zpci_cleanup_bus_resources(zdev);
+ if (zdev->fmb) {
+ zdev->fmb_enabled = 0;
+ kmem_cache_free(zdev_fmb_cache, zdev->fmb);
+ zdev->fmb = NULL;
+ }
+
zpci_bus_device_unregister(zdev);
zpci_destroy_iommu(zdev);
zpci_dbg(3, "rem fid:%x\n", zdev->fid);
diff --git a/arch/s390/pci/pci_debug.c b/arch/s390/pci/pci_debug.c
index c7ed7bf254b5..44f026ead414 100644
--- a/arch/s390/pci/pci_debug.c
+++ b/arch/s390/pci/pci_debug.c
@@ -97,7 +97,7 @@ static int pci_perf_show(struct seq_file *m, void *v)
return 0;
mutex_lock(&zdev->fmb_lock);
- if (!zdev->fmb) {
+ if (!zdev->fmb_enabled) {
mutex_unlock(&zdev->fmb_lock);
seq_puts(m, "FMB statistics disabled\n");
return 0;
--
2.55.0
next prev parent reply other threads:[~2026-09-16 21:34 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-16 21:32 [PATCH v6 0/4] vfio-pci/zdev: Improved zPCI Function Measurement Support Omar Elghoul
2026-09-16 21:32 ` [PATCH v6 1/4] s390/pci: Hold fmb_lock when enabling or disabling PCI devices Omar Elghoul
2026-09-16 21:44 ` sashiko-bot
2026-09-17 2:21 ` Matthew Rosato
2026-09-16 21:32 ` Omar Elghoul [this message]
2026-09-16 21:49 ` [PATCH v6 2/4] s390/pci: Reuse FMB buffer and preserve state in device re-enablement sashiko-bot
2026-09-17 2:21 ` Matthew Rosato
2026-09-17 13:32 ` Omar Elghoul
2026-09-17 15:28 ` Matthew Rosato
2026-09-17 16:38 ` Omar Elghoul
2026-09-16 21:32 ` [PATCH v6 3/4] s390/pci: Fence FMB enable/disable via debugfs for passthrough devices Omar Elghoul
2026-09-16 21:42 ` sashiko-bot
2026-09-17 2:23 ` Matthew Rosato
2026-09-16 21:32 ` [PATCH v6 4/4] vfio-pci/zdev: Add VFIO FMB device features Omar Elghoul
2026-09-16 21:42 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260916213222.233-3-oelghoul@linux.ibm.com \
--to=oelghoul@linux.ibm.com \
--cc=agordeev@linux.ibm.com \
--cc=alex@shazbot.org \
--cc=alifm@linux.ibm.com \
--cc=borntraeger@linux.ibm.com \
--cc=farman@linux.ibm.com \
--cc=gbayer@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mjrosato@linux.ibm.com \
--cc=pasic@linux.ibm.com \
--cc=schnelle@linux.ibm.com \
--cc=svens@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.