All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Paul Elder <paul.elder+renesas@ideasonboard.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
	Stephen Boyd <sboyd@kernel.org>,
	Brian Masney <bmasney+clk@redhat.com>,
	Jerome Brunet <jbrunet+clk@baylibre.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Magnus Damm <magnus.damm@gmail.com>,
	Ulf Hansson <ulfh@kernel.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
	linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-media@vger.kernel.org
Subject: Re: [PATCH 05/10] arm64: renesas: r8a78000: Add VSP[BI] nodes
Date: Fri, 18 Sep 2026 04:21:53 +0300	[thread overview]
Message-ID: <20260918012153.GE145152@killaraus.ideasonboard.com> (raw)
In-Reply-To: <20260917-epaul-v7-3-rc1-x5h-vsp-fcp-v1-5-4c72d4e086dd@ideasonboard.com>

On Thu, Sep 17, 2026 at 09:04:44PM +0900, Paul Elder wrote:
> Add DT nodes for the VSPB and VSPI IP cores in the R-Car X5H Soc.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Paul Elder <paul.elder+renesas@ideasonboard.com>
> ---
>  arch/arm64/boot/dts/renesas/r8a78000.dtsi | 99 +++++++++++++++++++++++++++++++
>  1 file changed, 99 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a78000.dtsi b/arch/arm64/boot/dts/renesas/r8a78000.dtsi
> index 2f8886f8b6545026397fd83969882f8c62afa9d3..f90b869579d384e3fc13d0a13625b7cddaac2868 100644
> --- a/arch/arm64/boot/dts/renesas/r8a78000.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a78000.dtsi
> @@ -1072,6 +1072,105 @@ fcpvb4: fcp@c503c000 {
>  			resets = <&mdlc_vio 0x106>;
>  		};
>  
> +		vspi0: vsp@c5080000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc5080000 0 0x8000>;
> +			interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;

Same comment as for 04/10.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

> +			power-domains = <&mdlc_vio 0x07 0xfe>;
> +			resets = <&mdlc_vio 0xfe>;
> +
> +			renesas,fcp = <&fcpvi0>;
> +		};
> +
> +		vspi1: vsp@c5088000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc5088000 0 0x8000>;
> +			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0xff>;
> +			resets = <&mdlc_vio 0xff>;
> +
> +			renesas,fcp = <&fcpvi1>;
> +		};
> +
> +		vspi2: vsp@c5090000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc5090000 0 0x8000>;
> +			interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0x100>;
> +			resets = <&mdlc_vio 0x100>;
> +
> +			renesas,fcp = <&fcpvi2>;
> +		};
> +
> +		vspi3: vsp@c5098000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc5098000 0 0x8000>;
> +			interrupts = <GIC_SPI 646 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0x101>;
> +			resets = <&mdlc_vio 0x101>;
> +
> +			renesas,fcp = <&fcpvi3>;
> +		};
> +
> +		vspb0: vsp@c50c0000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc50c0000 0 0x8000>;
> +			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0xf9>;
> +			resets = <&mdlc_vio 0xf9>;
> +
> +			renesas,fcp = <&fcpvb0>;
> +		};
> +
> +		vspb1: vsp@c50c8000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc50c8000 0 0x8000>;
> +			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0xfa>;
> +			resets = <&mdlc_vio 0xfa>;
> +
> +			renesas,fcp = <&fcpvb1>;
> +		};
> +
> +		vspb2: vsp@c50d0000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc50d0000 0 0x8000>;
> +			interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0xfb>;
> +			resets = <&mdlc_vio 0xfb>;
> +
> +			renesas,fcp = <&fcpvb2>;
> +		};
> +
> +		vspb3: vsp@c50d8000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc50d8000 0 0x8000>;
> +			interrupts = <GIC_SPI 621 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0xfc>;
> +			resets = <&mdlc_vio 0xfc>;
> +
> +			renesas,fcp = <&fcpvb3>;
> +		};
> +
> +		vspb4: vsp@c50e0000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc50e0000 0 0x8000>;
> +			interrupts = <GIC_SPI 622 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0xfd>;
> +			resets = <&mdlc_vio 0xfd>;
> +
> +			renesas,fcp = <&fcpvb4>;
> +		};
> +
>  		mdlc_cmnn: system-controller@ca410000 {
>  			compatible = "renesas,r8a78000-mdlc";
>  			reg = <0 0xca410000 0 0x1000>;

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2026-09-18  1:22 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-17 12:04 [PATCH 00/10] media: rcar-fcp, vsp1: Enable on R-Car X5H Paul Elder
2026-09-17 12:04 ` [PATCH 01/10] dt-bindings: clock: renesas,r8a78000-cpg: Add CPG_SGD4_VIO_DP_{TX,OTHER} Paul Elder
2026-09-17 12:09   ` sashiko-bot
2026-09-18  1:03   ` Laurent Pinchart
2026-09-18 11:38   ` Krzysztof Kozlowski
2026-09-17 12:04 ` [PATCH 02/10] clk: renesas: r8a78000: Add clock for FCPV and VSP for SCP FW SDKv4.36 Paul Elder
2026-09-17 12:20   ` sashiko-bot
2026-09-18  1:11   ` Laurent Pinchart
2026-09-18  7:35     ` Geert Uytterhoeven
2026-09-17 12:04 ` [PATCH 03/10] pmdomain: renesas: r8a78000: Add maps for VIO " Paul Elder
2026-09-18  1:15   ` Laurent Pinchart
2026-09-17 12:04 ` [PATCH 04/10] arm64: renesas: r8a78000: Add FCPV[BI] nodes Paul Elder
2026-09-18  1:18   ` Laurent Pinchart
2026-09-17 12:04 ` [PATCH 05/10] arm64: renesas: r8a78000: Add VSP[BI] nodes Paul Elder
2026-09-18  1:21   ` Laurent Pinchart [this message]
2026-09-17 12:04 ` [PATCH 06/10] media: rcar-fcp: Check device revision at probe time Paul Elder
2026-09-17 12:12   ` sashiko-bot
2026-09-18  1:23   ` Laurent Pinchart
2026-09-17 12:04 ` [PATCH 07/10] media: rcar-fcp: Handle resets Paul Elder
2026-09-17 12:13   ` sashiko-bot
2026-09-18  1:28   ` Laurent Pinchart
2026-09-18 11:03   ` Biju Das
2026-09-18 11:11     ` Laurent Pinchart
2026-09-18 11:47       ` Biju Das
2026-09-17 12:04 ` [PATCH 08/10] media: vsp1: Support full VSPB on R-Car M3-W, M3-N and E3 Paul Elder
2026-09-18  1:32   ` Laurent Pinchart
2026-09-17 12:04 ` [PATCH 09/10] media: vsp1: Document X5H SoC ID Paul Elder
2026-09-18  1:32   ` Laurent Pinchart
2026-09-17 12:04 ` [PATCH 10/10] media: rcar-fcp: Add R-Car X5H support Paul Elder
2026-09-18  1:35   ` Laurent Pinchart
2026-09-17 12:17 ` [PATCH 00/10] media: rcar-fcp, vsp1: Enable on R-Car X5H Laurent Pinchart
2026-09-18  1:50 ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260918012153.GE145152@killaraus.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=bmasney+clk@redhat.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=jbrunet+clk@baylibre.com \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mchehab@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=paul.elder+renesas@ideasonboard.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=ulfh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.