From: Ethan Nelson-Moore <enelsonmoore@gmail.com>
To: linux-mips@vger.kernel.org
Cc: Ethan Nelson-Moore <enelsonmoore@gmail.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Subject: [PATCH] MIPS: remove unused <asm/mips-boards/sead3-addr.h> header
Date: Thu, 17 Sep 2026 20:00:35 -0700 [thread overview]
Message-ID: <20260918030041.397914-1-enelsonmoore@gmail.com> (raw)
The last use of arch/mips/include/asm/mips-boards/sead3-addr.h was
removed in commit 64601cb1343f ("leds: Remove SEAD-3 driver") but it
was left behind. Remove it.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
---
.../mips/include/asm/mips-boards/sead3-addr.h | 83 -------------------
1 file changed, 83 deletions(-)
delete mode 100644 arch/mips/include/asm/mips-boards/sead3-addr.h
diff --git a/arch/mips/include/asm/mips-boards/sead3-addr.h b/arch/mips/include/asm/mips-boards/sead3-addr.h
deleted file mode 100644
index c0db57802f7c..000000000000
--- a/arch/mips/include/asm/mips-boards/sead3-addr.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2015 Imagination Technologies, Inc.
- * written by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_BOARDS_SEAD3_ADDR_H
-#define __ASM_MIPS_BOARDS_SEAD3_ADDR_H
-
-/*
- * Target #0 Register Decode
- */
-#define SEAD3_SD_SPDCNF 0xbb000040
-#define SEAD3_SD_SPADDR 0xbb000048
-#define SEAD3_SD_DATA 0xbb000050
-
-/*
- * Target #1 Register Decode
- */
-#define SEAD3_CFG 0xbb100110
-#define SEAD3_GIC_BASE_ADDRESS 0xbb1c0000
-#define SEAD3_SHARED_SECTION 0xbb1c0000
-#define SEAD3_VPE_LOCAL_SECTION 0xbb1c8000
-#define SEAD3_VPE_OTHER_SECTION 0xbb1cc000
-#define SEAD3_USER_MODE_VISIBLE_SECTION 0xbb1d0000
-
-/*
- * Target #3 Register Decode
- */
-#define SEAD3_USB_HS_BASE 0xbb200000
-#define SEAD3_USB_HS_IDENTIFICATION_REGS 0xbb200000
-#define SEAD3_USB_HS_CAPABILITY_REGS 0xbb200100
-#define SEAD3_USB_HS_OPERATIONAL_REGS 0xbb200140
-#define SEAD3_RESERVED 0xbe800000
-
-/*
- * Target #3 Register Decode
- */
-#define SEAD3_SRAM 0xbe000000
-#define SEAD3_OPTIONAL_SRAM 0xbe400000
-#define SEAD3_FPGA 0xbf000000
-
-#define SEAD3_PI_PIC32_USB_STATUS 0xbf000060
-#define SEAD3_PI_PIC32_USB_STATUS_IO_RDY (1 << 0)
-#define SEAD3_PI_PIC32_USB_STATUS_SPL_INT (1 << 1)
-#define SEAD3_PI_PIC32_USB_STATUS_GPIOA_INT (1 << 2)
-#define SEAD3_PI_PIC32_USB_STATUS_GPIOB_INT (1 << 3)
-
-#define SEAD3_PI_SOFT_ENDIAN 0xbf000070
-
-#define SEAD3_CPLD_P_SWITCH 0xbf000200
-#define SEAD3_CPLD_F_SWITCH 0xbf000208
-#define SEAD3_CPLD_P_LED 0xbf000210
-#define SEAD3_CPLD_F_LED 0xbf000218
-#define SEAD3_NEWSC_LIVE 0xbf000220
-#define SEAD3_NEWSC_REG 0xbf000228
-#define SEAD3_NEWSC_CTRL 0xbf000230
-
-#define SEAD3_LCD_CONTROL 0xbf000400
-#define SEAD3_LCD_DATA 0xbf000408
-#define SEAD3_CPLD_LCD_STATUS 0xbf000410
-#define SEAD3_CPLD_LCD_DATA 0xbf000418
-
-#define SEAD3_CPLD_PI_DEVRST 0xbf000480
-#define SEAD3_CPLD_PI_DEVRST_IC32_RST (1 << 0)
-#define SEAD3_RESERVED_0 0xbf000500
-
-#define SEAD3_PIC32_REGISTERS 0xbf000600
-#define SEAD3_RESERVED_1 0xbf000700
-#define SEAD3_UART_CH_0 0xbf000800
-#define SEAD3_UART_CH_1 0xbf000900
-#define SEAD3_RESERVED_2 0xbf000a00
-#define SEAD3_ETHERNET 0xbf010000
-#define SEAD3_RESERVED_3 0xbf020000
-#define SEAD3_USER_EXPANSION 0xbf400000
-#define SEAD3_RESERVED_4 0xbf800000
-#define SEAD3_BOOT_FLASH_EXTENSION 0xbfa00000
-#define SEAD3_BOOT_FLASH 0xbfc00000
-#define SEAD3_REVISION_REGISTER 0xbfc00010
-
-#endif /* __ASM_MIPS_BOARDS_SEAD3_ADDR_H */
--
2.43.0
next reply other threads:[~2026-09-18 3:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-18 3:00 Ethan Nelson-Moore [this message]
2026-09-26 9:38 ` [PATCH] MIPS: remove unused <asm/mips-boards/sead3-addr.h> header Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260918030041.397914-1-enelsonmoore@gmail.com \
--to=enelsonmoore@gmail.com \
--cc=linux-mips@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.