Re: [PATCH] virtio_blk: set the zone write granularity

[sashiko-bot@kernel.org]

> virtblk_read_zoned_limits() reads the write granularity that the device
> reports in virtio_blk_zoned_characteristics and assigns it to the
> physical block size and to io_min, but never to the limit that is named
> after it. queue_limits.zone_write_granularity is left at zero, so
> blk_validate_zoned_limits() raises it to the logical block size:
> 
> 	if (lim->zone_write_granularity < lim->logical_block_size)
> 		lim->zone_write_granularity = lim->logical_block_size;
> 
> A device that reports a granularity coarser than its logical block size,
> which is what the field exists to express, therefore has it silently
> reduced. A 512e host managed disk passed through to a guest reports a
> logical block size of 512 and a write granularity of 4096, and the guest
> ends up with a zone write granularity of 512.
> 
> [ ... ]
> 
> Set the zone write granularity from the value that the device reports.
> 
> Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
> Signed-off-by: Niklas Cassel <cassel@kernel.org>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260918140641.2031075-2-cassel@kernel.org?part=1