[PATCH 05/11] media: i2c: st-vd55g1: Default to illuminator on GPIO 1

[Peter Marshall <pm@petermarshall.ca>]

Sensors enumerated through a bus at runtime instead of a device tree may
not have any GPIO pins detected. Assume the illuminator is connected to
GPIO 1.

Signed-off-by: Peter Marshall <pm@petermarshall.ca>
---
 drivers/media/i2c/vd55g1.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/i2c/vd55g1.c b/drivers/media/i2c/vd55g1.c
index 22b1497e8851..032b76a84638 100644
--- a/drivers/media/i2c/vd55g1.c
+++ b/drivers/media/i2c/vd55g1.c
@@ -1895,6 +1895,11 @@ static int vd55g1_parse_dt_gpios(struct vd55g1 *sensor)
 		set_bit(led_gpios[i], &sensor->ext_leds_mask);
 	}
 
+	if (nb_gpios_leds == 0) {
+		sensor->gpios[1] = VD55G1_GPIO_MODE_STROBE;
+		set_bit(1, &sensor->ext_leds_mask);
+	}
+
 	return 0;
 }
 
-- 
2.55.0