From: Rosen Penev <rosenp@gmail.com>
To: devicetree@vger.kernel.org
Cc: "Florian Fainelli" <florian.fainelli@broadcom.com>,
"Hauke Mehrtens" <hauke@hauke-m.de>,
"Rafał Miłecki" <zajec5@gmail.com>,
"Broadcom internal kernel review list"
<bcm-kernel-feedback-list@broadcom.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
BCM5301X ARM ARCHITECTURE),
linux-kernel@vger.kernel.org (open list),
linux-usb@vger.kernel.org (open list:USB SUBSYSTEM)
Subject: [PATCH 2/2] ARM: dts: broadcom: model USB VBUS power with regulator-fixed
Date: Sun, 20 Sep 2026 14:13:56 -0700 [thread overview]
Message-ID: <20260920211356.186967-3-rosenp@gmail.com> (raw)
In-Reply-To: <20260920211356.186967-1-rosenp@gmail.com>
Replace the undocumented "vcc-gpio" property on the usb2/usb3
controller nodes with the standard vbus-supply/regulator-fixed model.
Boards now declare a regulator bound to the chipcommon GPIO that
bcma-hcd used to poke directly, one per power rail.
Polarity is preserved: rails that used a GPIO_ACTIVE_HIGH are marked
enable-active-high, while the Buffalo usb3 rails keep GPIO_ACTIVE_LOW
and rely on the binding's active-low default. regulator-boot-on mirrors
the rail being left enabled by CFE so the power line is never toggled
during probe.
Assisted-by: LLM
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
.../broadcom/bcm4708-buffalo-wxr-1750dhp.dts | 14 +++++++++-
.../bcm4708-buffalo-wzr-1166dhp-common.dtsi | 25 ++++++++++++++++--
.../broadcom/bcm4708-buffalo-wzr-1750dhp.dts | 25 ++++++++++++++++--
.../broadcom/bcm4708-linksys-ea6300-v1.dts | 14 +++++++++-
.../broadcom/bcm4708-linksys-ea6500-v2.dts | 14 +++++++++-
.../dts/broadcom/bcm4708-netgear-r6250.dts | 14 +++++++++-
.../dts/broadcom/bcm4708-netgear-r6300-v2.dts | 14 +++++++++-
.../dts/broadcom/bcm47081-luxul-xwr-1200.dts | 14 +++++++++-
.../broadcom/bcm47081-tplink-archer-c5-v2.dts | 14 +++++++++-
.../dts/broadcom/bcm4709-asus-rt-ac3200.dts | 14 +++++++++-
.../broadcom/bcm4709-buffalo-wxr-1900dhp.dts | 14 +++++++++-
.../dts/broadcom/bcm4709-linksys-ea9200.dts | 26 +++++++++++++++++--
.../dts/broadcom/bcm4709-netgear-r7000.dts | 16 ++++++++++--
.../dts/broadcom/bcm4709-netgear-r8000.dts | 16 ++++++++++--
.../broadcom/bcm4709-tplink-archer-c9-v1.dts | 26 +++++++++++++++++--
.../dts/broadcom/bcm47094-asus-rt-ac3100.dtsi | 14 +++++++++-
.../dts/broadcom/bcm47094-asus-rt-ac5300.dts | 14 +++++++++-
.../dts/broadcom/bcm47094-dlink-dir-885l.dts | 14 +++++++++-
.../dts/broadcom/bcm47094-dlink-dir-890l.dts | 26 +++++++++++++++++--
.../broadcom/bcm47094-linksys-panamera.dts | 26 +++++++++++++++++--
.../dts/broadcom/bcm47094-luxul-abr-4500.dts | 14 +++++++++-
.../dts/broadcom/bcm47094-luxul-xbr-4500.dts | 14 +++++++++-
.../dts/broadcom/bcm47094-luxul-xwr-3100.dts | 14 +++++++++-
.../broadcom/bcm47094-luxul-xwr-3150-v1.dts | 14 +++++++++-
.../arm/boot/dts/broadcom/bcm947189acdbmr.dts | 14 +++++++++-
25 files changed, 391 insertions(+), 33 deletions(-)
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
index f5c95c9a712e..1bedd74e40d0 100644
--- a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
@@ -129,8 +129,20 @@ port@4 {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb3 {
- vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&usb3_phy {
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
index 9f9084269ef5..faed5e0895c6 100644
--- a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -138,12 +138,33 @@ button-eject {
};
};
+/ {
+ usb2_power: regulator-usb2 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb3_power: regulator-usb3 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ };
+};
+
&usb2 {
- vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb2_power>;
};
&usb3 {
- vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ vbus-supply = <&usb3_power>;
};
&spi_nor {
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
index 95ef6ca7210b..6dcfb273329d 100644
--- a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
@@ -134,12 +134,33 @@ button-eject {
};
};
+/ {
+ usb2_power: regulator-usb2 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb3_power: regulator-usb3 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ };
+};
+
&usb2 {
- vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb2_power>;
};
&usb3 {
- vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ vbus-supply = <&usb3_power>;
};
&spi_nor {
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
index 03d5546a147c..41a02961763e 100644
--- a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
@@ -47,6 +47,18 @@ &usb3_phy {
status = "okay";
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb3 {
- vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
index ad246f9a734a..31aa34288d18 100644
--- a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
@@ -44,6 +44,18 @@ &usb3_phy {
status = "okay";
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb3 {
- vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
index 2bdbc7d18b0e..f8c8bb9e9661 100644
--- a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
@@ -83,8 +83,20 @@ button-restart {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb3 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&spi_nor {
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
index 55f0d9e90d5f..4c9b11c798bc 100644
--- a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
@@ -88,5 +88,17 @@ &usb3_phy {
};
&usb3 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
+};
+
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
index 73ff1694a4a0..87c4766d181c 100644
--- a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
@@ -106,8 +106,20 @@ button-restart {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb2 {
- vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&gmac0 {
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
index b6a5886698b2..3673d4b3c2b6 100644
--- a/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
@@ -108,6 +108,18 @@ partition-file-system {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb2 {
- vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
index 3da2daee0c84..e97a41d1a400 100644
--- a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
@@ -141,8 +141,20 @@ port@4 {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb2 {
- vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&usb3_phy {
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
index b7cd2faa30ce..66c141ef9f6d 100644
--- a/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
@@ -119,8 +119,20 @@ button-eject {
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb2 {
- vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&spi_nor {
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
index 37593e7582ba..4d2663627d08 100644
--- a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
@@ -154,12 +154,34 @@ &usb3_phy {
status = "okay";
};
+/ {
+ usb2_power: regulator-usb2 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb3_power: regulator-usb3 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb2 {
- vcc-gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb2_power>;
};
&usb3 {
- vcc-gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb3_power>;
};
&gmac2 {
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
index 24ba8f8f9bf3..1911daa84b08 100644
--- a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
@@ -93,12 +93,24 @@ button-restart {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb2 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&usb3 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&usb3_phy {
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
index a4b135d37659..5940f052b77f 100644
--- a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
@@ -186,12 +186,24 @@ wifi@0,0 {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb2 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&usb3 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&usb3_phy {
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
index 5a8b2b1567e6..69ff4f14b89e 100644
--- a/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
@@ -92,12 +92,34 @@ button-restart {
};
};
+/ {
+ usb2_power: regulator-usb2 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb3_power: regulator-usb3 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb2 {
- vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb2_power>;
};
&usb3 {
- vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb3_power>;
};
&spi_nor {
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
index 2d2e7e581291..29f54169d072 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
@@ -166,8 +166,20 @@ port@8 {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb2 {
- vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&usb3_phy {
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
index 8bf623c67de0..0906c0ef8182 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
@@ -150,8 +150,20 @@ port@4 {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb2 {
- vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&usb3_phy {
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
index c5099defe9f9..046bca843e29 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
@@ -117,8 +117,20 @@ button-restart {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb3 {
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&gmac0 {
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
index 944d592dee2c..1816f636b293 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
@@ -157,12 +157,34 @@ firmware@0 {
};
};
+/ {
+ usb2_power: regulator-usb2 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb3_power: regulator-usb3 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb2 {
- vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb2_power>;
};
&usb3 {
- vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb3_power>;
};
&usb3_phy {
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
index bdbd0f097925..b62ac448fe2d 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
@@ -197,12 +197,34 @@ fixed-link {
};
};
+/ {
+ usb2_power: regulator-usb2 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb3_power: regulator-usb3 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb2 {
- vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb2_power>;
};
&usb3 {
- vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb3_power>;
};
&srab {
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
index e374062eb5b7..fbd362991e43 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
@@ -61,8 +61,20 @@ button-restart {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb3 {
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&gmac0 {
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
index cf95af9db1e6..f1f099a90997 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
@@ -61,8 +61,20 @@ button-restart {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb3 {
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&gmac0 {
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
index 4d0ba315a204..9420ae1367d8 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
@@ -101,8 +101,20 @@ button-restart {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb3 {
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&gmac0 {
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
index 8e487f60a2cc..f4f718b52c6f 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
@@ -97,8 +97,20 @@ wifi@0,0 {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb3 {
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
&usb3_phy {
diff --git a/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts b/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts
index 0b8727ae6f16..fcb0bb9f3942 100644
--- a/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts
@@ -91,6 +91,18 @@ wifi@0,1,0 {
};
};
+/ {
+ usb_power: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
&usb2 {
- vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_power>;
};
--
2.55.0
next prev parent reply other threads:[~2026-09-20 21:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-20 21:13 [PATCH 0/2] usb: bcma: control VBUS via a regulator Rosen Penev
2026-09-20 21:13 ` [PATCH 1/2] usb: bcma: control VBUS via a regulator instead of a GPIO Rosen Penev
2026-09-20 21:22 ` sashiko-bot
2026-09-21 18:32 ` Rafał Miłecki
2026-09-20 21:13 ` Rosen Penev [this message]
2026-09-20 21:27 ` [PATCH 2/2] ARM: dts: broadcom: model USB VBUS power with regulator-fixed sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260920211356.186967-3-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=florian.fainelli@broadcom.com \
--cc=gregkh@linuxfoundation.org \
--cc=hauke@hauke-m.de \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh@kernel.org \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.