Re: [PATCH v3 0/2] tools: mkimage: add SpacemiT K3 boot image support

[Yixun Lan <dlan@kernel.org>]

Hi Junhui,

On 22:54 Mon 21 Sep     , Junhui Liu wrote:
> The SpacemiT BootROM loads a first-stage bootloader from storage or over
> USB in MaskROM mode. Vendor firmware packages this bootloader as FSBL.bin.
> 
> This series documents the SpacemiT boot image format and adds the
> "smtimage" mkimage type for the CRC32-protected K3 variant used in
> non-secure boot mode. It provides the FSBL packaging needed for future
> K3 SPL support. Select K3 with "-n k3" when creating an image.
> 
> K1 and K3 secure boot use RSA authentication and are not supported yet.
> 
> How to test
> -----------
> 
> Rebuild mkimage, wrap a small UART test payload, and load it through K3
> MaskROM fastboot. The payload is linked at 0xc0801000 because the BootROM
> places the complete image at 0xc0800000 and enters the payload after the
> 4 KiB prefix. UART0 should print "Hello SpacemiT K3!" and then loop
> indefinitely.
> 
>   $ make tools-only_defconfig
>   $ make tools-only
> 
>   $ cat > k3-uart.S << 'EOF'
>   	.equ	UART0_THR, 0xd4017000
> 	.equ	UART0_LSR, 0xd4017014
> 
> 	.section	.text
> 	.global	_start
> _start:
> 	la	s0, str
> 1:
> 	lbu	a0, (s0)
> 	beqz	a0, exit
> 	call	uart_send
> 	addi	s0, s0, 1
> 	j	1b
> 
> exit:
> 	j	exit
> 
> uart_send:
> 	li	t0, UART0_LSR
> 	lw	t1, (t0)
> 	andi	t1, t1, 0x20
> 	beqz	t1, uart_send
> 	li	t0, UART0_THR
> 	sw	a0, (t0)
> 	ret
> 
> 	.section	.rodata
> str:
> 	.asciz	"Hello SpacemiT K3!\n"
> EOF
> 
>   $ riscv64-linux-gnu-gcc -nostdlib -fno-builtin -fno-pie -no-pie -static \
>     -march=rv64gc -mabi=lp64 -g -Wall -Wl,--build-id=none \
>     -Ttext=0xc0801000 -o k3-uart.elf k3-uart.S
>   $ riscv64-linux-gnu-objcopy -O binary k3-uart.elf k3-uart.bin
>   $ ./tools/mkimage -T smtimage -n k3 -d k3-uart.bin k3-uart-smt.bin
> 
> Hold the FDL button, power on the board to enter MaskROM, then run
> fastboot on host:
> 
>   $ fastboot stage k3-uart-smt.bin
>   $ fastboot continue
> 
> ---
> Changes in v3:
> - Align the uimage_type table entry with surrounding columns
> - Explicitly include the needed headers
> - Drop SMT_PAYLOAD_ALIGN macro
> - Simplify the NULL check in smtimage_get_variant()
> - Fix the title underline length in smtimage.rst
> - Link to v2: https://patch.msgid.link/20260909-spacemit-aihd-v2-0-780e98cf2fec@pigmoral.tech
> 
> Changes in v2:
> - Use "smtimage" for the image type
> - Update the documentation and command examples to match
> - Link to v1: https://patch.msgid.link/20260822-spacemit-aihd-v1-0-bf4c41993891@pigmoral.tech
> 
> ---
> Junhui Liu (2):
>       tools: mkimage: add SpacemiT K3 boot image support
>       doc: board: spacemit: document the SpacemiT boot image format
> 
>  boot/image.c                    |   1 +
>  doc/board/spacemit/index.rst    |   2 +-
>  doc/board/spacemit/smtimage.rst | 143 +++++++++++++++++++++++++++
>  include/image.h                 |   1 +
>  tools/Makefile                  |   1 +
>  tools/smtimage.c                | 208 ++++++++++++++++++++++++++++++++++++++++
>  6 files changed, 355 insertions(+), 1 deletion(-)
> ---
Looks good, so with

Reviewed-by: Yixun Lan <dlan@kernel.org>

-- 
Yixun Lan (dlan)