From: Michael Grzeschik <mgr@kernel.org>
To: Eric Van Hensbergen <ericvh@kernel.org>,
Latchesar Ionkov <lucho@ionkov.net>,
Dominique Martinet <asmadeus@codewreck.org>,
Christian Schoenebeck <linux_oss@crudebyte.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: v9fs@lists.linux.dev, linux-kernel@vger.kernel.org,
Michael Grzeschik <mgr@kernel.org>,
Hyungjung Joo <jhj140711@gmail.com>,
stable@vger.kernel.org
Subject: [PATCH 7/7] net/9p/usbg: clear stale client pointer on close
Date: Tue, 22 Sep 2026 00:26:00 +0200 [thread overview]
Message-ID: <20260922-usb9pfsfixes-v1-7-9d8dcc52904c@kernel.org> (raw)
In-Reply-To: <20260922-usb9pfsfixes-v1-0-9d8dcc52904c@kernel.org>
From: Hyungjung Joo <jhj140711@gmail.com>
p9_usbg_close() tears down the client transport, but usb9pfs keeps
using usb9pfs->client from asynchronous TX and RX completion handlers.
A late completion can therefore dereference a client that has already
been freed during mount teardown.
Clear usb9pfs->client under usb9pfs->lock when closing the transport,
detach any pending TX request from in_req->context, and make the TX/RX
completion handlers bail out once the transport has been detached. This
keeps late completions from touching a freed or rebound p9_client.
Fixes: a3be076dc174 ("net/9p/usbg: Add new usb gadget function transport")
Cc: stable@vger.kernel.org
Signed-off-by: Hyungjung Joo <jhj140711@gmail.com>
Signed-off-by: Michael Grzeschik <mgr@kernel.org>
---
net/9p/trans_usbg.c | 61 +++++++++++++++++++++++++++++++++++++++--------------
1 file changed, 45 insertions(+), 16 deletions(-)
diff --git a/net/9p/trans_usbg.c b/net/9p/trans_usbg.c
index 544690a5c717..c6306b073089 100644
--- a/net/9p/trans_usbg.c
+++ b/net/9p/trans_usbg.c
@@ -149,7 +149,8 @@ static void usb9pfs_tx_complete(struct usb_ep *ep, struct usb_request *req)
{
struct f_usb9pfs *usb9pfs = ep->driver_data;
struct usb_composite_dev *cdev = usb9pfs->function.config->cdev;
- struct p9_req_t *p9_tx_req = req->context;
+ struct p9_client *client;
+ struct p9_req_t *p9_tx_req;
unsigned long flags;
/* reset zero packages */
@@ -165,18 +166,25 @@ static void usb9pfs_tx_complete(struct usb_ep *ep, struct usb_request *req)
ep->name, req->status, req->actual, req->length);
spin_lock_irqsave(&usb9pfs->lock, flags);
- WRITE_ONCE(p9_tx_req->status, REQ_STATUS_SENT);
+ client = usb9pfs->client;
+ p9_tx_req = req->context;
+ req->context = NULL;
- p9_req_put(usb9pfs->client, p9_tx_req);
+ if (!client || !p9_tx_req)
+ goto unlock_complete;
- req->context = NULL;
+ WRITE_ONCE(p9_tx_req->status, REQ_STATUS_SENT);
+ p9_req_put(client, p9_tx_req);
+
+unlock_complete:
spin_unlock_irqrestore(&usb9pfs->lock, flags);
complete(&usb9pfs->send);
}
-static struct p9_req_t *usb9pfs_rx_header(struct f_usb9pfs *usb9pfs, void *buf)
+static struct p9_req_t *usb9pfs_rx_header(struct f_usb9pfs *usb9pfs,
+ struct p9_client *client, void *buf)
{
struct p9_req_t *p9_rx_req;
struct p9_fcall rc;
@@ -202,7 +210,7 @@ static struct p9_req_t *usb9pfs_rx_header(struct f_usb9pfs *usb9pfs, void *buf)
"mux %p pkt: size: %d bytes tag: %d\n",
usb9pfs, rc.size, rc.tag);
- p9_rx_req = p9_tag_lookup(usb9pfs->client, rc.tag);
+ p9_rx_req = p9_tag_lookup(client, rc.tag);
if (!p9_rx_req || p9_rx_req->status != REQ_STATUS_SENT) {
p9_debug(P9_DEBUG_ERROR, "Unexpected packet tag %d\n", rc.tag);
return NULL;
@@ -212,7 +220,7 @@ static struct p9_req_t *usb9pfs_rx_header(struct f_usb9pfs *usb9pfs, void *buf)
p9_debug(P9_DEBUG_ERROR,
"requested packet size too big: %d for tag %d with capacity %zd\n",
rc.size, rc.tag, p9_rx_req->rc.capacity);
- p9_req_put(usb9pfs->client, p9_rx_req);
+ p9_req_put(client, p9_rx_req);
return NULL;
}
@@ -220,7 +228,7 @@ static struct p9_req_t *usb9pfs_rx_header(struct f_usb9pfs *usb9pfs, void *buf)
p9_debug(P9_DEBUG_ERROR,
"No recv fcall for tag %d (req %p), disconnecting!\n",
rc.tag, p9_rx_req);
- p9_req_put(usb9pfs->client, p9_rx_req);
+ p9_req_put(client, p9_rx_req);
return NULL;
}
@@ -231,8 +239,10 @@ static void usb9pfs_rx_complete(struct usb_ep *ep, struct usb_request *req)
{
struct f_usb9pfs *usb9pfs = ep->driver_data;
struct usb_composite_dev *cdev = usb9pfs->function.config->cdev;
+ struct p9_client *client;
struct p9_req_t *p9_rx_req;
unsigned int req_size = req->actual;
+ unsigned long flags;
int status = REQ_STATUS_RCVD;
if (req->status) {
@@ -241,9 +251,16 @@ static void usb9pfs_rx_complete(struct usb_ep *ep, struct usb_request *req)
return;
}
- p9_rx_req = usb9pfs_rx_header(usb9pfs, req->buf);
- if (!p9_rx_req)
+ spin_lock_irqsave(&usb9pfs->lock, flags);
+ client = usb9pfs->client;
+ if (!client) {
+ spin_unlock_irqrestore(&usb9pfs->lock, flags);
return;
+ }
+
+ p9_rx_req = usb9pfs_rx_header(usb9pfs, client, req->buf);
+ if (!p9_rx_req)
+ goto out_unlock;
if (req_size > p9_rx_req->rc.capacity) {
dev_err(&cdev->gadget->dev,
@@ -257,8 +274,11 @@ static void usb9pfs_rx_complete(struct usb_ep *ep, struct usb_request *req)
p9_rx_req->rc.size = req_size;
- p9_client_cb(usb9pfs->client, p9_rx_req, status);
- p9_req_put(usb9pfs->client, p9_rx_req);
+ p9_client_cb(client, p9_rx_req, status);
+ p9_req_put(client, p9_rx_req);
+
+out_unlock:
+ spin_unlock_irqrestore(&usb9pfs->lock, flags);
complete(&usb9pfs->received);
}
@@ -412,7 +432,9 @@ static int p9_usbg_create(struct p9_client *client, struct fs_context *fc)
client->status = Disconnected;
else
client->status = Connected;
+ spin_lock_irq(&usb9pfs->lock);
usb9pfs->client = client;
+ spin_unlock_irq(&usb9pfs->lock);
client->trans_mod->maxsize = usb9pfs->buflen;
@@ -423,12 +445,19 @@ static int p9_usbg_create(struct p9_client *client, struct fs_context *fc)
static void usb9pfs_clear_tx(struct f_usb9pfs *usb9pfs)
{
+ struct p9_client *client;
struct p9_req_t *req;
+ unsigned long flags;
- guard(spinlock_irqsave)(&usb9pfs->lock);
+ spin_lock_irqsave(&usb9pfs->lock, flags);
+ client = usb9pfs->client;
+ usb9pfs->client = NULL;
+ req = usb9pfs->in_req ? usb9pfs->in_req->context : NULL;
+ if (usb9pfs->in_req)
+ usb9pfs->in_req->context = NULL;
+ spin_unlock_irqrestore(&usb9pfs->lock, flags);
- req = usb9pfs->in_req->context;
- if (!req)
+ if (!req || !client)
return;
usb9pfs->in_req->context = NULL;
@@ -439,7 +468,7 @@ static void usb9pfs_clear_tx(struct f_usb9pfs *usb9pfs)
if (!req->t_err)
req->t_err = -ECONNRESET;
- p9_client_cb(usb9pfs->client, req, REQ_STATUS_ERROR);
+ p9_client_cb(client, req, REQ_STATUS_ERROR);
usb9pfs->in_req->context = NULL;
}
--
2.53.0
next prev parent reply other threads:[~2026-09-21 22:26 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-21 22:25 [PATCH 0/7] usb9pfs: stable fixes Michael Grzeschik
2026-09-21 22:25 ` [PATCH 1/7] net/9p/usbg: also disable endpoints on p9_usbg_close Michael Grzeschik
2026-09-21 22:25 ` [PATCH 2/7] net/9p/usbg: set client to Disconnected on usb9pfs_disable Michael Grzeschik
2026-09-21 22:25 ` [PATCH 3/7] net/9p/usbg: always reset completion when disconnecting Michael Grzeschik
2026-09-21 22:25 ` [PATCH 4/7] net/9p/usbg: call disable_usb9pfs() from usb9pfs_disable() Michael Grzeschik
2026-09-21 22:25 ` [PATCH 5/7] net/9p/usbg: fix out_req buffer leak in disable_usb9pfs Michael Grzeschik
2026-09-21 22:25 ` [PATCH 6/7] net/9p/usbg: remove bogus context initialization in alloc_requests Michael Grzeschik
2026-09-21 22:26 ` Michael Grzeschik [this message]
2026-09-22 8:50 ` [PATCH 0/7] usb9pfs: stable fixes Dominique Martinet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260922-usb9pfsfixes-v1-7-9d8dcc52904c@kernel.org \
--to=mgr@kernel.org \
--cc=asmadeus@codewreck.org \
--cc=ericvh@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jhj140711@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux_oss@crudebyte.com \
--cc=lucho@ionkov.net \
--cc=stable@vger.kernel.org \
--cc=v9fs@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.