[PATCH 0/3] Add support for Acer Swift SFA14-11

[Jianfeng Liu <liujianfeng1994@gmail.com>]

Add support for Acer Swift SFA14-11, a laptop based on the Qualcomm
X1E78100 SoC.

The following hardware has been tested and is working:

- NVMe SSD
- WiFi and Bluetooth (UART)
- USB-A ports
- USB-C port with DP alt mode
- eDP display with PWM backlight
- HDMI (via DP bridge)
- I2C HID keyboard and touchpad
- Audio: speakers, headphone jack, DP alt mode and HDMI
- GPU and video decoding
- Battery charging

Note on the compatible string: There are two names:
- Swift SFA14-11[1]
- SFA14-11[2]
from the support site of acer.com, but the UEFI firmware reports the
Product Name as SFA14-11. The compatible string follows the firmware
("acer,sfa14-11"), while the model string uses "Acer Swift SFA14-11"
for readability.

[1] https://www.acer.com/au-en/support/product-support/Swift_SFA14-11
[2] https://www.acer.com/au-en/support/product-support/SFA14-11


Jianfeng Liu (3):
  dt-bindings: arm: qcom: Add Acer Swift SFA14-11
  arm64: dts: qcom: Add Acer Swift SFA14-11
  firmware: qcom: scm: Allow QSEECOM on Acer Swift SFA14-11

 .../devicetree/bindings/arm/qcom.yaml         |    1 +
 arch/arm64/boot/dts/qcom/Makefile             |    2 +
 .../boot/dts/qcom/x1e78100-acer-sfa14-11.dts  | 1520 +++++++++++++++++
 drivers/firmware/qcom/qcom_scm.c              |    1 +
 4 files changed, 1524 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/x1e78100-acer-sfa14-11.dts

---
base-commit: 5c4d4169604b335c38bbc79bc1fc03042981fc6f
branch: sfa14-11-next-20260921

-- 
2.47.3