[PATCH v2 2/2] dmaengine: ti: edma: Fix missing pm_runtime cleanup on probe failure

[phucduc.bui@gmail.com]

From: bui duc phuc <phucduc.bui@gmail.com>

pm_runtime_get_sync() errors were not checked, so on failure the usage
count leaked and pm_runtime_enable() was never undone, leaving
runtime PM in a half-initialized state after a failed probe.

Switch to pm_runtime_resume_and_get(), which cleans up the usage count
internally on error, and call pm_runtime_disable() to balance the earlier
pm_runtime_enable() on that path.

Fixes: 23f49fd2ea9b ("dmaengine: edma: Remove dynamic TPTC power management feature")
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 drivers/dma/ti/edma.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index 8be9e71dab76..5254ce7b8514 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -2650,8 +2650,16 @@ static struct platform_driver edma_driver = {
 
 static int edma_tptc_probe(struct platform_device *pdev)
 {
+	int ret;
+
 	pm_runtime_enable(&pdev->dev);
-	return pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret < 0) {
+		pm_runtime_disable(&pdev->dev);
+		return ret;
+	}
+
+	return 0;
 }
 
 static struct platform_driver edma_tptc_driver = {
-- 
2.43.0