[PATCH v6 18/23] dmaengine: ste_dma40: Reject direction changes after allocation

[Linus Walleij <linusw@kernel.org>]

Logical channel allocation uses the configured direction to select the
source or destination allocation mask, derive the logical channel number,
and choose the LCPA location.

d40_set_runtime_config_write() nevertheless overwrites the configured
direction when a transfer is prepared for the opposite direction.
d40_free_dma() then clears the wrong allocation mask, leaking the original
resource and potentially releasing one used by another client.

Reject directions that differ from the direction used during allocation
and propagate runtime configuration errors to callers. Skip slave runtime
configuration for memcpy transfers, which also use d40_prep_sg() but do
not require it.

Fixes: 95e1400fa131 ("DMAENGINE: add runtime slave config to DMA40 v3")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260618051539.15E201F000E9@smtp.kernel.org/
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
---
 drivers/dma/ste_dma40.c | 29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 660ac63efb40..4f5839691b85 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -2413,7 +2413,13 @@ d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src,
 		return NULL;
 	}
 
-	d40_set_runtime_config_write(dchan, &chan->slave_config, direction);
+	if (direction != DMA_MEM_TO_MEM) {
+		ret = d40_set_runtime_config_write(dchan,
+						   &chan->slave_config,
+						   direction);
+		if (ret)
+			return NULL;
+	}
 
 	spin_lock_irqsave(&chan->lock, flags);
 
@@ -2889,6 +2895,13 @@ static int d40_set_runtime_config_write(struct dma_chan *chan,
 		return -EINVAL;
 	}
 
+	if (direction != cfg->dir) {
+		chan_err(d40c,
+			 "transfer direction %d differs from allocated direction %d\n",
+			 direction, cfg->dir);
+		return -EINVAL;
+	}
+
 	src_addr_width = config->src_addr_width;
 	src_maxburst = config->src_maxburst;
 	dst_addr_width = config->dst_addr_width;
@@ -2897,13 +2910,6 @@ static int d40_set_runtime_config_write(struct dma_chan *chan,
 	if (direction == DMA_DEV_TO_MEM) {
 		config_addr = config->src_addr;
 
-		if (cfg->dir != DMA_DEV_TO_MEM)
-			dev_dbg(d40c->base->dev,
-				"channel was not configured for peripheral "
-				"to memory transfer (%d) overriding\n",
-				cfg->dir);
-		cfg->dir = DMA_DEV_TO_MEM;
-
 		/* Configure the memory side */
 		if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
 			dst_addr_width = src_addr_width;
@@ -2913,13 +2919,6 @@ static int d40_set_runtime_config_write(struct dma_chan *chan,
 	} else if (direction == DMA_MEM_TO_DEV) {
 		config_addr = config->dst_addr;
 
-		if (cfg->dir != DMA_MEM_TO_DEV)
-			dev_dbg(d40c->base->dev,
-				"channel was not configured for memory "
-				"to peripheral transfer (%d) overriding\n",
-				cfg->dir);
-		cfg->dir = DMA_MEM_TO_DEV;
-
 		/* Configure the memory side */
 		if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
 			src_addr_width = dst_addr_width;

-- 
2.55.0