From: Andre Przywara <andre.przywara@arm.com>
To: Chen-Yu Tsai <wens@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney+clk@redhat.com>,
Jerome Brunet <jbrunet+clk@baylibre.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev
Subject: Re: [PATCH v2 2/5] clk: sunxi-ng: mp: support clocks with just a shift register
Date: Thu, 24 Sep 2026 08:54:38 +0200 [thread overview]
Message-ID: <20260924085438.3edce740@ryzen.lan> (raw)
In-Reply-To: <CAGb2v67XsgfoYrJ6gJ_kshjnbSOOrJt9fK6RE1ErsTuHuVji5w@mail.gmail.com>
On Fri, 18 Sep 2026 11:51:19 +0800
Chen-Yu Tsai <wens@kernel.org> wrote:
Hi,
> On Fri, Sep 18, 2026 at 6:39 AM Andre Przywara <andre.przywara@arm.com> wrote:
> >
> > The "mp" clock models a mod clock with divider and a shift field. At
> > least one clock in the Allwinner A523 features just a power-of-2 divider
> > field, so support an initialisation of the clock without providing an
> > actual divider field.
>
> Please just use the single divider clock type instead. It properly supports
> power-of-2 dividers.
Ah, indeed, there is SUNXI_CCU_P_DATA_WITH_MUX_GATE now, will drop this
patch then.
So when using that macro it looks like this:
static SUNXI_CCU_P_DATA_WITH_MUX_GATE(pll_cpu_l_div_clk, "pll-cpu-l-div",
pll_cpu_l_hws, 0x060,
16, 2, /* P */
0, 0, /* no mux */
0, /* no gate */
CLK_SET_RATE_PARENT); /* flags */
There are still some unused bits, does that look OK or shall I add a
macro that allows to skip mux and gate?
static SUNXI_CCU_P_DATA(pll_cpu_l_div_clk, "pll-cpu-l-div",
pll_cpu_l_hws, 0x60,
16, 2, /* P */
CLK_SET_RATE_PARENT); /* flags */
Cheers,
Andre
>
> ChenYu
>
> > Add a check whether the "width" field is 0, and skip the divider
> > handling in this case, as the GENMASK macro will not work with a zero
> > length.
> >
> > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> > ---
> > drivers/clk/sunxi-ng/ccu_mp.c | 6 ++++--
> > 1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/clk/sunxi-ng/ccu_mp.c b/drivers/clk/sunxi-ng/ccu_mp.c
> > index 7cdb0eedc69b5..3896cb94bf733 100644
> > --- a/drivers/clk/sunxi-ng/ccu_mp.c
> > +++ b/drivers/clk/sunxi-ng/ccu_mp.c
> > @@ -236,9 +236,11 @@ static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate,
> > spin_lock_irqsave(cmp->common.lock, flags);
> >
> > reg = readl(cmp->common.base + cmp->common.reg);
> > - reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
> > + if (cmp->m.width)
> > + reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
> > reg &= ~GENMASK(cmp->p.width + cmp->p.shift - 1, cmp->p.shift);
> > - reg |= (m - cmp->m.offset) << cmp->m.shift;
> > + if (cmp->m.width)
> > + reg |= (m - cmp->m.offset) << cmp->m.shift;
> > if (shift)
> > reg |= ilog2(p) << cmp->p.shift;
> > else
> > --
> > 2.43.0
> >
>
next prev parent reply other threads:[~2026-09-24 6:59 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-17 22:39 [PATCH v2 0/5] arm64: allwinner: a523: Enable CPU clocks Andre Przywara
2026-09-17 22:39 ` [PATCH v2 1/5] clk: sunxi-ng: generalise update bit Andre Przywara
2026-09-21 15:47 ` Chen-Yu Tsai
2026-09-17 22:39 ` [PATCH v2 2/5] clk: sunxi-ng: mp: support clocks with just a shift register Andre Przywara
2026-09-18 3:51 ` Chen-Yu Tsai
2026-09-24 6:54 ` Andre Przywara [this message]
2026-09-17 22:39 ` [PATCH v2 3/5] dt-bindings: clock: sun55i-a523-ccu: Add A523 CPU CCU clock controller Andre Przywara
2026-09-17 22:46 ` sashiko-bot
2026-09-17 22:39 ` [PATCH v2 4/5] clk: sunxi-ng: add support for the A523/T527 CPU CCU Andre Przywara
2026-09-17 22:51 ` sashiko-bot
2026-09-17 22:39 ` [PATCH v2 5/5] arm64: dts: allwinner: a523: add CPU clocks Andre Przywara
2026-09-17 22:46 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260924085438.3edce740@ryzen.lan \
--to=andre.przywara@arm.com \
--cc=bmasney+clk@redhat.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet+clk@baylibre.com \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=sboyd@kernel.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.