From: Chuck Lever <cel@kernel.org>
To: NeilBrown <neil@brown.name>, Jeff Layton <jlayton@kernel.org>,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <dai.ngo@oracle.com>, Tom Talpey <tom@talpey.com>
Cc: <linux-nfs@vger.kernel.org>
Subject: [PATCH v2 09/33] NFSD: Use xdrgen XDR functions for NFSv3 SETATTR procedure
Date: Thu, 24 Sep 2026 13:09:48 -0400 [thread overview]
Message-ID: <20260924171012.3978-10-cel@kernel.org> (raw)
In-Reply-To: <20260924171012.3978-1-cel@kernel.org>
Replace the NFSPROC3_SETATTR entry in the nfsd_procedures3 array
with an entry that dispatches the xdrgen-generated
nfs_svc_decode_SETATTR3args and nfs_svc_encode_SETATTR3res. A
wrapper structure bridges the generated xdrgen argument type and
the legacy svc_fh and iattr representations the NFSD VFS layer
still uses; the result uses the generated SETATTR3res type
directly. The new nfsd3_sattr3_to_iattr() and
nfsd3_nfstime3_to_timespec64() helpers translate the decoded
sattr3 into the iattr that nfsd_setattr() consumes, and
nfsd3_fill_wcc_data() assembles the weak cache consistency data
that both the success and failure results carry.
When an operation leaves no post-op attributes saved,
svcxdr_encode_wcc_data() omits the pre-op attributes and fetches fresh
post-op attributes instead. nfsd3_fill_wcc_data() keeps that behavior
through a new nfsd3_fill_post_op_attr() helper, which later procedures
also use to fill in post-op attributes.
The pc_argzero field is now set to zero for the NFSv3 SETATTR
procedure. The xdrgen decoders are trusted to initialize all
arguments in the argp->xdrgen field, making the early defensive
memset unnecessary. The remaining argp fields are cleared as
needed.
Because nfsd3_proc_setattr() now assembles the WCC data, that
work moves out of the XDR result encoder, and the reference to
the file handle can be released directly by nfsd3_proc_setattr().
A separate ->pc_release callback is thus no longer needed. This
makes it straightforward to confirm that the file handle is
properly released during every error flow.
nfs3svc_decode_sattrargs() no longer has any callers, so it and
its svcxdr_decode_sattrguard3() helper are removed.
Signed-off-by: Chuck Lever <cel@kernel.org>
---
fs/nfsd/nfs3proc.c | 211 ++++++++++++++++++++++++++++++++++++++-------
fs/nfsd/nfs3xdr.c | 27 ------
fs/nfsd/xdr3.h | 8 --
3 files changed, 179 insertions(+), 67 deletions(-)
diff --git a/fs/nfsd/nfs3proc.c b/fs/nfsd/nfs3proc.c
index 1facaccf408b..815722afde9a 100644
--- a/fs/nfsd/nfs3proc.c
+++ b/fs/nfsd/nfs3proc.c
@@ -47,6 +47,15 @@ struct GETATTR3res_wrapper {
static_assert(offsetof(struct GETATTR3res_wrapper, xdrgen) == 0);
+struct SETATTR3args_wrapper {
+ struct SETATTR3args xdrgen;
+ struct svc_fh fh;
+ struct iattr iattrs;
+ struct timespec64 guard;
+};
+
+static_assert(offsetof(struct SETATTR3args_wrapper, xdrgen) == 0);
+
static int nfs3_ftypes[] = {
0, /* NF3NON */
S_IFREG, /* NF3REG */
@@ -186,6 +195,14 @@ nfsd3_mode_to_ftype3(umode_t mode)
return NF3REG;
}
+static __always_inline void
+nfsd3_nfstime3_to_timespec64(struct timespec64 *dst,
+ const struct nfstime3 *src)
+{
+ dst->tv_sec = src->seconds;
+ dst->tv_nsec = src->nseconds;
+}
+
static void
nfsd3_stat_to_fattr3(struct svc_rqst *rqstp, struct fattr3 *fattr,
const struct kstat *stat, const struct svc_fh *fhp)
@@ -223,6 +240,121 @@ nfsd3_stat_to_fattr3(struct svc_rqst *rqstp, struct fattr3 *fattr,
nfsd3_timespec64_to_nfstime3(&fattr->ctime, &stat->ctime);
}
+static void
+nfsd3_fill_post_op_attr(struct svc_rqst *rqstp, struct post_op_attr *attr,
+ struct svc_fh *fhp);
+
+static void
+nfsd3_fill_wcc_data(struct svc_rqst *rqstp, struct wcc_data *wcc,
+ struct svc_fh *fhp)
+{
+ /* Pre-op attributes are of no use to the client without post-op ones */
+ if (!fhp->fh_post_saved) {
+ wcc->before.attributes_follow = false;
+ nfsd3_fill_post_op_attr(rqstp, &wcc->after, fhp);
+ return;
+ }
+
+ wcc->before.attributes_follow = fhp->fh_pre_saved;
+ if (fhp->fh_pre_saved) {
+ struct wcc_attr *wattr = &wcc->before.u.attributes;
+
+ wattr->size = fhp->fh_pre_size;
+ nfsd3_timespec64_to_nfstime3(&wattr->mtime, &fhp->fh_pre_mtime);
+ nfsd3_timespec64_to_nfstime3(&wattr->ctime, &fhp->fh_pre_ctime);
+ }
+
+ wcc->after.attributes_follow = true;
+ nfsd3_stat_to_fattr3(rqstp, &wcc->after.u.attributes,
+ &fhp->fh_post_attr, fhp);
+}
+
+static void
+nfsd3_sattr3_to_iattr(struct svc_rqst *rqstp, struct iattr *iap,
+ const struct sattr3 *sattr)
+{
+ /* trace_nfsd_vfs_setattr() records fields ia_valid leaves unset */
+ memset(iap, 0, sizeof(*iap));
+
+ if (sattr->mode.set_it) {
+ iap->ia_valid |= ATTR_MODE;
+ iap->ia_mode = sattr->mode.u.mode;
+ }
+ if (sattr->uid.set_it) {
+ iap->ia_uid = make_kuid(nfsd_user_namespace(rqstp),
+ sattr->uid.u.uid);
+ if (uid_valid(iap->ia_uid))
+ iap->ia_valid |= ATTR_UID;
+ }
+ if (sattr->gid.set_it) {
+ iap->ia_gid = make_kgid(nfsd_user_namespace(rqstp),
+ sattr->gid.u.gid);
+ if (gid_valid(iap->ia_gid))
+ iap->ia_valid |= ATTR_GID;
+ }
+ if (sattr->size.set_it) {
+ iap->ia_valid |= ATTR_SIZE;
+ iap->ia_size = sattr->size.u.size;
+ }
+ switch (sattr->atime.set_it) {
+ case DONT_CHANGE:
+ break;
+ case SET_TO_SERVER_TIME:
+ iap->ia_valid |= ATTR_ATIME;
+ break;
+ case SET_TO_CLIENT_TIME:
+ nfsd3_nfstime3_to_timespec64(&iap->ia_atime,
+ &sattr->atime.u.atime);
+ iap->ia_valid |= ATTR_ATIME | ATTR_ATIME_SET;
+ break;
+ }
+ switch (sattr->mtime.set_it) {
+ case DONT_CHANGE:
+ break;
+ case SET_TO_SERVER_TIME:
+ iap->ia_valid |= ATTR_MTIME;
+ break;
+ case SET_TO_CLIENT_TIME:
+ nfsd3_nfstime3_to_timespec64(&iap->ia_mtime,
+ &sattr->mtime.u.mtime);
+ iap->ia_valid |= ATTR_MTIME | ATTR_MTIME_SET;
+ break;
+ }
+}
+
+/*
+ * struct kstat is pretty huge. To reduce stack utilization, reuse @fhp's
+ * fh_post_attr field as the stat buffer passed to fh_getattr.
+ *
+ * This is safe to do as long as proc functions that need both WCC and
+ * post_op_attrs invoke nfsd3_fill_wcc_data() before invoking
+ * nfsd3_fill_post_op_attr() on the same fhp argument.
+ */
+static void
+nfsd3_fill_post_op_attr(struct svc_rqst *rqstp, struct post_op_attr *attr,
+ struct svc_fh *fhp)
+{
+ struct kstat *statp = &fhp->fh_post_attr;
+ struct dentry *dentry = fhp->fh_dentry;
+
+ /*
+ * The inode may be NULL if the call failed because of a stale
+ * file handle. In this case, no attributes are returned.
+ */
+ if (fhp->fh_no_wcc || !dentry || !d_really_is_positive(dentry))
+ goto no_post_op_attrs;
+ if (fh_getattr(fhp, statp) != nfs_ok)
+ goto no_post_op_attrs;
+
+ attr->attributes_follow = true;
+ lease_get_mtime(d_inode(dentry), &statp->mtime);
+ nfsd3_stat_to_fattr3(rqstp, &attr->u.attributes, statp, fhp);
+ return;
+
+no_post_op_attrs:
+ attr->attributes_follow = false;
+}
+
/*
* A full specification of each of the following NFSv3 procedures is
* available in RFC 1813 Section 3.3.
@@ -282,32 +414,47 @@ static __be32 nfsd3_proc_getattr(struct svc_rqst *rqstp)
return rpc_success;
}
-/*
- * Set a file's attributes
+/**
+ * nfsd3_proc_setattr - SETATTR: Set file attributes
+ * @rqstp: RPC transaction context
+ *
+ * Return:
+ * %rpc_success: RPC executed successfully
+ *
+ * RPC synopsis:
+ * SETATTR3res NFSPROC3_SETATTR(SETATTR3args) = 2;
*/
-static __be32
-nfsd3_proc_setattr(struct svc_rqst *rqstp)
+static __be32 nfsd3_proc_setattr(struct svc_rqst *rqstp)
{
- struct nfsd3_sattrargs *argp = rqstp->rq_argp;
- struct nfsd3_attrstat *resp = rqstp->rq_resp;
- struct nfsd_attrs attrs = {
- .na_iattr = &argp->attrs,
- };
+ struct SETATTR3args_wrapper *argp = rqstp->rq_argp;
+ struct SETATTR3res *resp = rqstp->rq_resp;
const struct timespec64 *guardtime = NULL;
+ struct svc_fh *fhp = &argp->fh;
+ struct nfsd_attrs nattrs = {
+ .na_iattr = &argp->iattrs,
+ };
- dprintk("nfsd: SETATTR(3) %s\n",
- SVCFH_fmt(&argp->fh));
-
- fh_copy(&resp->fh, &argp->fh);
- if (!nfsd3_time_in_range(&argp->attrs)) {
- resp->status = nfserr_inval;
- goto out;
+ nfsd3_fh3_to_svc_fh(fhp, &argp->xdrgen.object);
+ nfsd3_sattr3_to_iattr(rqstp, &argp->iattrs, &argp->xdrgen.new_attributes);
+ if (argp->xdrgen.guard.check) {
+ nfsd3_nfstime3_to_timespec64(&argp->guard,
+ &argp->xdrgen.guard.u.obj_ctime);
+ guardtime = &argp->guard;
}
- if (argp->check_guard)
- guardtime = &argp->guardtime;
- resp->status = nfsd_setattr(rqstp, &resp->fh, &attrs, guardtime);
-out:
- resp->status = nfsd3_map_status(resp->status);
+
+ if (nfsd3_time_in_range(&argp->iattrs))
+ resp->status = nfsd_setattr(rqstp, fhp, &nattrs, guardtime);
+ else
+ resp->status = nfserr_inval;
+
+ if (resp->status == nfs_ok) {
+ nfsd3_fill_wcc_data(rqstp, &resp->u.resok.obj_wcc, fhp);
+ } else {
+ resp->status = nfsd3_map_status(resp->status);
+ nfsd3_fill_wcc_data(rqstp, &resp->u.resfail.obj_wcc, fhp);
+ }
+
+ fh_put(fhp);
return rpc_success;
}
@@ -1066,16 +1213,15 @@ static const struct svc_procedure nfsd_procedures3[22] = {
.pc_name = "GETATTR",
},
[NFSPROC3_SETATTR] = {
- .pc_func = nfsd3_proc_setattr,
- .pc_decode = nfs3svc_decode_sattrargs,
- .pc_encode = nfs3svc_encode_wccstatres,
- .pc_release = nfs3svc_release_fhandle,
- .pc_argsize = sizeof(struct nfsd3_sattrargs),
- .pc_argzero = sizeof(struct nfsd3_sattrargs),
- .pc_ressize = sizeof(struct nfsd3_wccstatres),
- .pc_cachetype = RC_REPLBUFF,
- .pc_xdrressize = ST+WC,
- .pc_name = "SETATTR",
+ .pc_func = nfsd3_proc_setattr,
+ .pc_decode = nfs_svc_decode_SETATTR3args,
+ .pc_encode = nfs_svc_encode_SETATTR3res,
+ .pc_argsize = sizeof(struct SETATTR3args_wrapper),
+ .pc_argzero = 0,
+ .pc_ressize = sizeof(struct SETATTR3res),
+ .pc_cachetype = RC_REPLBUFF,
+ .pc_xdrressize = NFS3_SETATTR3res_sz,
+ .pc_name = "SETATTR",
},
[NFSPROC3_LOOKUP] = {
.pc_func = nfsd3_proc_lookup,
@@ -1308,7 +1454,8 @@ static const struct svc_procedure nfsd_procedures3[22] = {
union nfsd3_xdrstore {
struct GETATTR3args_wrapper getattrargs;
struct GETATTR3res_wrapper getattrres;
- struct nfsd3_sattrargs sattrargs;
+ struct SETATTR3args_wrapper setattrargs;
+ struct SETATTR3res setattrres;
struct nfsd3_diropargs diropargs;
struct nfsd3_readargs readargs;
struct nfsd3_writeargs writeargs;
diff --git a/fs/nfsd/nfs3xdr.c b/fs/nfsd/nfs3xdr.c
index 5802208f96b7..eb5f3148a0ab 100644
--- a/fs/nfsd/nfs3xdr.c
+++ b/fs/nfsd/nfs3xdr.c
@@ -295,23 +295,6 @@ svcxdr_decode_sattr3(struct svc_rqst *rqstp, struct xdr_stream *xdr,
return true;
}
-static bool
-svcxdr_decode_sattrguard3(struct xdr_stream *xdr, struct nfsd3_sattrargs *args)
-{
- u32 check;
-
- if (xdr_stream_decode_bool(xdr, &check) < 0)
- return false;
- if (check) {
- if (!svcxdr_decode_nfstime3(xdr, &args->guardtime))
- return false;
- args->check_guard = 1;
- } else
- args->check_guard = 0;
-
- return true;
-}
-
static bool
svcxdr_decode_specdata3(struct xdr_stream *xdr, struct nfsd3_mknodargs *args)
{
@@ -499,16 +482,6 @@ nfs3svc_decode_fhandleargs(struct svc_rqst *rqstp, struct xdr_stream *xdr)
return svcxdr_decode_nfs_fh3(xdr, &args->fh);
}
-bool
-nfs3svc_decode_sattrargs(struct svc_rqst *rqstp, struct xdr_stream *xdr)
-{
- struct nfsd3_sattrargs *args = rqstp->rq_argp;
-
- return svcxdr_decode_nfs_fh3(xdr, &args->fh) &&
- svcxdr_decode_sattr3(rqstp, xdr, &args->attrs) &&
- svcxdr_decode_sattrguard3(xdr, args);
-}
-
bool
nfs3svc_decode_diropargs(struct svc_rqst *rqstp, struct xdr_stream *xdr)
{
diff --git a/fs/nfsd/xdr3.h b/fs/nfsd/xdr3.h
index 2dcd36160ced..354cff178b75 100644
--- a/fs/nfsd/xdr3.h
+++ b/fs/nfsd/xdr3.h
@@ -18,13 +18,6 @@
#define NFS3_MAXNAMLEN NAME_MAX
#define NFS3_MAXPATHLEN PATH_MAX
-struct nfsd3_sattrargs {
- struct svc_fh fh;
- struct iattr attrs;
- int check_guard;
- struct timespec64 guardtime;
-};
-
struct nfsd3_diropargs {
struct svc_fh fh;
char * name;
@@ -244,7 +237,6 @@ struct nfsd3_fhandle_pair {
};
bool nfs3svc_decode_fhandleargs(struct svc_rqst *rqstp, struct xdr_stream *xdr);
-bool nfs3svc_decode_sattrargs(struct svc_rqst *rqstp, struct xdr_stream *xdr);
bool nfs3svc_decode_diropargs(struct svc_rqst *rqstp, struct xdr_stream *xdr);
bool nfs3svc_decode_accessargs(struct svc_rqst *rqstp, struct xdr_stream *xdr);
bool nfs3svc_decode_readargs(struct svc_rqst *rqstp, struct xdr_stream *xdr);
--
2.55.0
next prev parent reply other threads:[~2026-09-24 17:10 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-24 17:09 [PATCH v2 00/33] Convert server-side NFSv3 XDR to use xdrgen Chuck Lever
2026-09-24 17:09 ` [PATCH v2 01/33] NFSD: Report a first-batch readdir error in the reply status Chuck Lever
2026-09-24 17:09 ` [PATCH v2 02/33] Documentation: Add the RPC language description of NFSv3 Chuck Lever
2026-09-24 17:09 ` [PATCH v2 03/33] NFSD: Add infrastructure for generating NFSv3 XDR encoders and decoders Chuck Lever
2026-09-24 17:09 ` [PATCH v2 04/33] NFSD: Replace nfs3.h with nfs3xdr_gen.h Chuck Lever
2026-09-24 17:09 ` [PATCH v2 05/33] NFSD: Replace the nfsd3_createres macro Chuck Lever
2026-09-24 17:09 ` [PATCH v2 06/33] NFSD: Relocate the NFSv3 XDR storage union into nfs3proc.c Chuck Lever
2026-09-24 17:09 ` [PATCH v2 07/33] NFSD: Use xdrgen XDR functions for the NFSv3 NULL procedure Chuck Lever
2026-09-24 17:09 ` [PATCH v2 08/33] NFSD: Use xdrgen XDR functions for NFSv3 GETATTR procedure Chuck Lever
2026-09-24 17:09 ` Chuck Lever [this message]
2026-09-24 17:09 ` [PATCH v2 10/33] NFSD: Use xdrgen XDR functions for the NFSv3 LOOKUP procedure Chuck Lever
2026-09-24 17:09 ` [PATCH v2 11/33] NFSD: Use xdrgen XDR functions for NFSv3 ACCESS procedure Chuck Lever
2026-09-24 17:09 ` [PATCH v2 12/33] NFSD: Use xdrgen XDR functions for NFSv3 READLINK procedure Chuck Lever
2026-09-24 17:09 ` [PATCH v2 13/33] NFSD: Use xdrgen XDR functions for NFSv3 READ procedure Chuck Lever
2026-09-24 17:09 ` [PATCH v2 14/33] NFSD: Use xdrgen XDR functions for NFSv3 WRITE procedure Chuck Lever
2026-09-24 17:09 ` [PATCH v2 15/33] NFSD: Use xdrgen XDR functions for NFSv3 CREATE procedure Chuck Lever
2026-09-24 17:09 ` [PATCH v2 16/33] NFSD: Use xdrgen XDR functions for NFSv3 MKDIR procedure Chuck Lever
2026-09-24 17:09 ` [PATCH v2 17/33] NFSD: Use xdrgen XDR functions for NFSv3 SYMLINK procedure Chuck Lever
2026-09-24 17:09 ` [PATCH v2 18/33] NFSD: Use xdrgen XDR functions for NFSv3 MKNOD procedure Chuck Lever
2026-09-24 17:09 ` [PATCH v2 19/33] NFSD: Use xdrgen XDR functions for the NFSv3 REMOVE procedure Chuck Lever
2026-09-24 17:09 ` [PATCH v2 20/33] NFSD: Use xdrgen XDR functions for the NFSv3 RMDIR procedure Chuck Lever
2026-09-24 17:10 ` [PATCH v2 21/33] NFSD: Use xdrgen XDR functions for the NFSv3 RENAME procedure Chuck Lever
2026-09-24 17:10 ` [PATCH v2 22/33] NFSD: Use xdrgen XDR functions for the NFSv3 LINK procedure Chuck Lever
2026-09-24 17:10 ` [PATCH v2 23/33] NFSD: Use xdrgen XDR functions for the NFSv3 FSSTAT procedure Chuck Lever
2026-09-24 17:10 ` [PATCH v2 24/33] NFSD: Use xdrgen XDR functions for the NFSv3 FSINFO procedure Chuck Lever
2026-09-24 17:10 ` [PATCH v2 25/33] NFSD: Use xdrgen XDR functions for the NFSv3 PATHCONF procedure Chuck Lever
2026-09-24 17:10 ` [PATCH v2 26/33] NFSD: Use xdrgen XDR functions for the NFSv3 COMMIT procedure Chuck Lever
2026-09-24 17:10 ` [PATCH v2 27/33] NFSD: Use xdrgen XDR functions for NFSv3 READDIR arguments Chuck Lever
2026-09-24 17:10 ` [PATCH v2 28/33] NFSD: Use xdrgen XDR functions for NFSv3 READDIRPLUS arguments Chuck Lever
2026-09-24 17:10 ` [PATCH v2 29/33] NFSD: Refactor NFSv3 directory cookie encoding Chuck Lever
2026-09-24 17:10 ` [PATCH v2 30/33] NFSD: Refactor NFSv3 directory entry encoding Chuck Lever
2026-09-24 17:10 ` [PATCH v2 31/33] NFSD: Split struct nfsd3_readdirres Chuck Lever
2026-09-24 17:10 ` [PATCH v2 32/33] NFSD: Use xdrgen XDR functions for NFSv3 READDIR results Chuck Lever
2026-09-24 17:10 ` [PATCH v2 33/33] NFSD: Use xdrgen XDR functions for NFSv3 READDIRPLUS results Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260924171012.3978-10-cel@kernel.org \
--to=cel@kernel.org \
--cc=dai.ngo@oracle.com \
--cc=jlayton@kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=neil@brown.name \
--cc=okorniev@redhat.com \
--cc=tom@talpey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.