All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Markus Probst <markus.probst@posteo.de>
Cc: "Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Uwe Kleine-König" <uwe@kleine-koenig.org>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Gregory Clement" <gregory.clement@bootlin.com>,
	"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
	"Michael Langer" <michael.brainbug.langer@googlemail.com>,
	"Andrew Morton" <akpm@linux-foundation.org>,
	"Linus Walleij" <linusw@kernel.org>,
	linux-arm-kernel@lists.infradead.org, linux-rtc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v9 1/6] dt-bindings: rtc: Add pinctrl for S35390A
Date: Thu, 24 Sep 2026 17:02:28 -0500	[thread overview]
Message-ID: <20260924220228.GA1895971-robh@kernel.org> (raw)
In-Reply-To: <20260916-rtc_s35390a_int1-v9-1-b2567a3e4959@posteo.de>

On Wed, Sep 16, 2026 at 04:00:36PM +0000, Markus Probst wrote:
> Synology NAS devices use the output pin for interrupt signal 1 to wake up
> the system.
> 
> Move devicetree bindings for sii,s35390a into its own file.
> Add necessary properties to configure the individual pins via pinctrl,
> which allows the interrupt signal 1 to be used for wakeup alarm.
> 
> Signed-off-by: Markus Probst <markus.probst@posteo.de>
> ---
>  .../devicetree/bindings/rtc/sii,s35390a.yaml       | 121 +++++++++++++++++++++
>  .../devicetree/bindings/rtc/trivial-rtc.yaml       |   3 -
>  2 files changed, 121 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/rtc/sii,s35390a.yaml b/Documentation/devicetree/bindings/rtc/sii,s35390a.yaml
> new file mode 100644
> index 000000000000..f3bf5900fb3c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/sii,s35390a.yaml
> @@ -0,0 +1,121 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/sii,s35390a.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: S-35390A 2-WIRE REAL-TIME CLOCK

Drop the all caps.

> +
> +maintainers:
> +  - Markus Probst <markus.probst@posteo.de>
> +
> +description:
> +  The S-35390A is a CMOS 2-wire real-time clock IC which operates with the
> +  very low current consumption in the wide range of operation voltage.
> +
> +allOf:
> +  - $ref: rtc.yaml#
> +
> +properties:
> +  compatible:
> +    const: sii,s35390a
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2
> +    description: Supports up to 2 interrupt lines via the INT1 and INT2 pins.
> +
> +  interrupt-names:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      enum:
> +        - int1
> +        - int2
> +
> +  wakeup-parent: true
> +
> +  wakeup-source: true
> +
> +  "#clock-cells":
> +    const: 1
> +
> +patternProperties:
> +  "^pins":
> +    type: object
> +    additionalProperties: false
> +
> +    patternProperties:
> +      "-pins$":
> +        type: object
> +        additionalProperties: false
> +
> +        allOf:

Don't need allOf.

> +          - $ref: /schemas/pinctrl/pinmux-node.yaml#
> +
> +        properties:
> +          pins:
> +            minItems: 1
> +            items:
> +              enum:
> +                - int1
> +                - int2
> +
> +          function:
> +            description: |
> +              Pin function:
> +              - ignore:  Preserve the previous state.
> +              - disable: Disable pin output.
> +              - wakeup:  Output wakes up the system.
> +              - clock:   Output clock pulse.
> +              - pmin1:   Minute periodical output with 50% duty.
> +              - pmin2:   Minute periodical output L for 7.81 ms.
> +                         Can only be used with pin int1.
> +            enum:
> +              - ignore
> +              - disable
> +              - wakeup
> +              - clock
> +              - pmin1
> +              - pmin2
> +
> +        required:
> +          - pins
> +          - function
> +
> +required:
> +  - compatible
> +  - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        rtc@30 {
> +            compatible = "sii,s35390a";
> +            reg = <0x30>;
> +            pinctrl-0 = <&rtc_pins_default>;
> +            pinctrl-names = "default";
> +
> +            interrupt-names = "int1";
> +            interrupts = <23>;
> +
> +            rtc_pins_default: pins {
> +              int1-pins {
> +                pins = "int1";
> +                function = "wakeup";
> +              };
> +              int2-pins {
> +                pins = "int2";
> +                function = "disable";
> +              };
> +            };
> +        };
> +    };
> diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> index f4d0eed98a08..7b3f682ef4d5 100644
> --- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> @@ -81,8 +81,6 @@ properties:
>        - ricoh,rv5c386
>        # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
>        - ricoh,rv5c387a
> -      # 2-wire CMOS real-time clock
> -      - sii,s35390a
>        # ST SPEAr Real-time Clock
>        - st,spear600-rtc
>        # VIA/Wondermedia VT8500 Real-time Clock
> @@ -105,5 +103,4 @@ required:
>    - reg
>  
>  additionalProperties: false
> -

Unrelated change. Drop.

Rob

  parent reply	other threads:[~2026-09-24 22:02 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-16 16:00 [PATCH v9 0/6] rtc: s35390a: Allow use of output pin for interrupt signal 1 for wakealarm Markus Probst
2026-09-16 16:00 ` [PATCH v9 1/6] dt-bindings: rtc: Add pinctrl for S35390A Markus Probst
2026-09-16 16:07   ` sashiko-bot
2026-09-24 22:02   ` Rob Herring [this message]
2026-09-16 16:00 ` [PATCH v9 2/6] rtc: s35390a: Add missing newline to dev_err Markus Probst
2026-09-16 16:04   ` sashiko-bot
2026-09-16 16:00 ` [PATCH v9 3/6] rtc: s35390a: Fix alarm not disabling Markus Probst
2026-09-16 16:13   ` sashiko-bot
2026-09-16 16:00 ` [PATCH v9 4/6] rtc: s35390a: Read 24-hour mode on access Markus Probst
2026-09-16 16:10   ` sashiko-bot
2026-09-16 16:00 ` [PATCH v9 5/6] rtc: s35390a: Add pinctrl Markus Probst
2026-09-16 16:12   ` sashiko-bot
2026-09-16 16:00 ` [PATCH v9 6/6] rtc: s35390a: Add synology quirk Markus Probst
2026-09-16 16:05   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260924220228.GA1895971-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=krzk+dt@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=markus.probst@posteo.de \
    --cc=michael.brainbug.langer@googlemail.com \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=uwe@kleine-koenig.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.