From: "Frédéric Danis" <frederic.danis@collabora.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH BlueZ 2/2] doc/qualification: add VCP PTS tests documentation
Date: Fri, 25 Sep 2026 14:43:43 +0200 [thread overview]
Message-ID: <20260925124343.3344864-2-frederic.danis@collabora.com> (raw)
In-Reply-To: <20260925124343.3344864-1-frederic.danis@collabora.com>
From: raghavendra <raghavendra.rao@collabora.com>
---
doc/qualification/vcp-pts.rst | 287 ++++++++++++++++++++++++++++++++++
1 file changed, 287 insertions(+)
create mode 100644 doc/qualification/vcp-pts.rst
diff --git a/doc/qualification/vcp-pts.rst b/doc/qualification/vcp-pts.rst
new file mode 100644
index 000000000..659f1a976
--- /dev/null
+++ b/doc/qualification/vcp-pts.rst
@@ -0,0 +1,287 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+.. Copyright © 2026 Collabora Ltd.
+
+================
+VCP test results
+================
+
+:PTS version: 8.12.0 Build 5
+
+Setup
+=====
+
+- Remove PTS device from Bluetooth devices
+
+Tests
+=====
+
+The kernel and BlueZ versions represent the oldest version without backport
+for which we know the test passed.
+
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| Test name | Result | Kernel | BlueZ | |
++==============================+==========+========+=======+=========================================================================+
+| VCP/VC/CGGIT/CHA/BV-01-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - btgatt-client -d <pts_addr> |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | On demand to read Characteristic 'Volume State': |
+| | | | | |
+| | | | | - [GATT client]# select-attribute <handle> |
+| | | | | - [GATT client]# read |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| VCP/VC/CGGIT/CHA/BV-02-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - btgatt-client -d <pts_addr> |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | On demand to read Characteristic 'Volume State': |
+| | | | | |
+| | | | | - [GATT client]# select-attribute <handle> |
+| | | | | - [GATT client]# read |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| VCP/VC/CGGIT/SER/BV-01-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - btgatt-client -d <pts_addr> |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| VCP/VC/SPE/BI-05-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - btgatt-client -d <pts_addr> |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | On demand to read Characteristic 'Volume State': |
+| | | | | |
+| | | | | - [GATT client]# select-attribute <handle> |
+| | | | | - [GATT client]# read |
+| | | | | |
+| | | | | On demand to write Characteristic 'Volume Control Point' |
+| | | | | to handle 0x00DA: |
+| | | | | |
+| | | | | - select-attribute <handle> |
+| | | | | - write <value that PTS expects> 0x00 |
+| | | | | |
+| | | | | On demand to read Characteristic 'Volume State': |
+| | | | | |
+| | | | | - [GATT client]# select-attribute <handle> |
+| | | | | - [GATT client]# read |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| VCP/VC/SPE/BI-06-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - btgatt-client -d <pts_addr> |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | On demand to read Characteristic 'Volume State': |
+| | | | | |
+| | | | | - [GATT client]# select-attribute <handle> |
+| | | | | - [GATT client]# read |
+| | | | | |
+| | | | | On demand to write Characteristic 'Volume Control Point' |
+| | | | | to handle 0x00DA: |
+| | | | | |
+| | | | | - select-attribute <handle> |
+| | | | | - write <value that PTS expects> 0x00 |
+| | | | | |
+| | | | | On demand to read Characteristic 'Volume State': |
+| | | | | |
+| | | | | - [GATT client]# select-attribute <handle> |
+| | | | | - [GATT client]# read |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| VCP/VC/SPE/BI-15-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - btgatt-client -d <pts_addr> |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | On demand to read Characteristic 'Volume State': |
+| | | | | |
+| | | | | - [GATT client]# select-attribute <handle> |
+| | | | | - [GATT client]# read |
+| | | | | |
+| | | | | On demand to write Characteristic 'Volume Control Point' |
+| | | | | to handle 0x00DA: |
+| | | | | |
+| | | | | - select-attribute <handle> |
+| | | | | - write <value that PTS expects> 0x00 |
+| | | | | |
+| | | | | On demand to read Characteristic 'Volume State': |
+| | | | | |
+| | | | | - [GATT client]# select-attribute <handle> |
+| | | | | - [GATT client]# read |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| VCP/VC/VCCP/BV-05-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - btgatt-client -d <pts_addr> |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | On demand to read Characteristic 'Volume State': |
+| | | | | |
+| | | | | - [GATT client]# select-attribute <handle> |
+| | | | | - [GATT client]# read |
+| | | | | |
+| | | | | On demand to write Characteristic 'Volume Control Point' |
+| | | | | to handle 0x00DA: |
+| | | | | |
+| | | | | - select-attribute <handle> |
+| | | | | - write <value that PTS expects> 0x00 |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| VCP/VC/VCCP/BV-06-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - btgatt-client -d <pts_addr> |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | On demand to read Characteristic 'Volume State': |
+| | | | | |
+| | | | | - [GATT client]# select-attribute <handle> |
+| | | | | - [GATT client]# read |
+| | | | | |
+| | | | | On demand to write Characteristic 'Volume Control Point' |
+| | | | | to handle 0x00DA: |
+| | | | | |
+| | | | | - select-attribute <handle> |
+| | | | | - write <value that PTS expects> 0x00 |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
--
2.43.0
next prev parent reply other threads:[~2026-09-25 12:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-25 12:43 [PATCH BlueZ 1/2] doc/qualification: Add VCP PICS file Frédéric Danis
2026-09-25 12:43 ` Frédéric Danis [this message]
2026-09-25 15:55 ` [BlueZ,1/2] " bluez.test.bot
2026-09-28 17:50 ` [PATCH BlueZ 1/2] " patchwork-bot+bluetooth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260925124343.3344864-2-frederic.danis@collabora.com \
--to=frederic.danis@collabora.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.