[PATCH v2] remoteproc: virtio: Synchronize virtqueue teardown with rproc_vq_interrupt()

[Yuho Choi <oss.patchbox@gmail.com>]

rproc_vq_interrupt() looks up rvring->vq and passes it to
vring_interrupt() without synchronizing against __rproc_virtio_del_vqs(),
which clears rvring->vq and frees the virtqueue. rproc_stop() and
__rproc_detach() stop the subdevices, and so delete the virtqueues,
before the remote processor is stopped or detached, so the remote can
still signal a vring meanwhile. The interrupt path can then pass a NULL
or already freed virtqueue to vring_interrupt().

Protect rvring->vq with SRCU: rproc_vq_interrupt() uses the virtqueue
inside a read-side section, and __rproc_virtio_del_vqs() clears the
pointers and waits for readers before freeing the virtqueues. Plain RCU
is not usable because rproc_vq_interrupt() is also called from process
context, where vring callbacks may sleep.

Fixes: 7a186941626d ("remoteproc: remove the single rpmsg vdev limitation")
Cc: stable@vger.kernel.org
Signed-off-by: Yuho Choi <oss.patchbox@gmail.com>
---
Changes in v2:
- Rework the fix: v1 only loaded rvring->vq once, which closes the NULL
  window but not the use-after-free once the virtqueue is freed after
  the load (Mathieu Poirier). Use SRCU so __rproc_virtio_del_vqs()
  waits for rproc_vq_interrupt() before freeing the virtqueues.
- Update the subject accordingly.

v1: https://lore.kernel.org/all/20260922190159.509836-1-oss.patchbox@gmail.com/

Compile-tested only (arm64 and x86_64 defconfig + REMOTEPROC/RPMSG_VIRTIO, 
W=1, sparse).

 drivers/remoteproc/remoteproc_virtio.c | 35 +++++++++++++++++++++-----
 include/linux/remoteproc.h             |  2 +-
 2 files changed, 30 insertions(+), 7 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
index d5e9ff045a28a..cd8f3a8b4870a 100644
--- a/drivers/remoteproc/remoteproc_virtio.c
+++ b/drivers/remoteproc/remoteproc_virtio.c
@@ -16,6 +16,7 @@
 #include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
 #include <linux/remoteproc.h>
+#include <linux/srcu.h>
 #include <linux/virtio.h>
 #include <linux/virtio_config.h>
 #include <linux/virtio_ids.h>
@@ -26,6 +27,14 @@
 
 #include "remoteproc_internal.h"
 
+/*
+ * Protects rproc_vring->vq: rproc_vq_interrupt() uses the virtqueue inside a
+ * read-side section, and __rproc_virtio_del_vqs() waits for those sections to
+ * finish before freeing it. Sleepable RCU is used because vring callbacks may
+ * sleep when rproc_vq_interrupt() is called from process context.
+ */
+DEFINE_STATIC_SRCU(rproc_vq_srcu);
+
 static int copy_dma_range_map(struct device *to, struct device *from)
 {
 	const struct bus_dma_region *map = from->dma_range_map, *new_map, *r;
@@ -88,15 +97,24 @@ static bool rproc_virtio_notify(struct virtqueue *vq)
  */
 irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int notifyid)
 {
+	irqreturn_t ret = IRQ_NONE;
 	struct rproc_vring *rvring;
+	struct virtqueue *vq;
+	int idx;
 
 	dev_dbg(&rproc->dev, "vq index %d is interrupted\n", notifyid);
 
 	rvring = idr_find(&rproc->notifyids, notifyid);
-	if (!rvring || !rvring->vq)
+	if (!rvring)
 		return IRQ_NONE;
 
-	return vring_interrupt(0, rvring->vq);
+	idx = srcu_read_lock(&rproc_vq_srcu);
+	vq = srcu_dereference(rvring->vq, &rproc_vq_srcu);
+	if (vq)
+		ret = vring_interrupt(0, vq);
+	srcu_read_unlock(&rproc_vq_srcu, idx);
+
+	return ret;
 }
 EXPORT_SYMBOL(rproc_vq_interrupt);
 
@@ -153,8 +171,8 @@ static struct virtqueue *rp_find_vq(struct virtio_device *vdev,
 
 	vq->num_max = num;
 
-	rvring->vq = vq;
 	vq->priv = rvring;
+	rcu_assign_pointer(rvring->vq, vq);
 
 	/* Update vring in resource table */
 	rsc = (void *)rproc->table_ptr + rvdev->rsc_offset;
@@ -168,11 +186,16 @@ static void __rproc_virtio_del_vqs(struct virtio_device *vdev)
 	struct virtqueue *vq, *n;
 	struct rproc_vring *rvring;
 
-	list_for_each_entry_safe(vq, n, &vdev->vqs, list) {
+	list_for_each_entry(vq, &vdev->vqs, list) {
 		rvring = vq->priv;
-		rvring->vq = NULL;
-		vring_del_virtqueue(vq);
+		RCU_INIT_POINTER(rvring->vq, NULL);
 	}
+
+	/* Wait for rproc_vq_interrupt() callers still using the virtqueues */
+	synchronize_srcu(&rproc_vq_srcu);
+
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+		vring_del_virtqueue(vq);
 }
 
 static void rproc_virtio_del_vqs(struct virtio_device *vdev)
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index a44368737b39a..919d19fe99198 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -340,7 +340,7 @@ struct rproc_vring {
 	u32 align;
 	int notifyid;
 	struct rproc_vdev *rvdev;
-	struct virtqueue *vq;
+	struct virtqueue __rcu *vq;
 };
 
 /**

base-commit: aa98230e410f0ed212b6788c46b1e4d49e0ff7ca
-- 
2.43.0