[PATCH] usb: typec: ucsi: Skip CAM query when partner has no alt modes

[Gris Ge <cnfourt@gmail.com>]

Since Thunderbolt alternate mode support was added,
`ucsi_altmode_update_active()` is called on every Connector Partner
Changed event.  This made the driver send `UCSI_GET_CURRENT_CAM` to
PPMs even when the partner had no alternate modes registered. Firmware
that does not support the optional alternate mode details answered Not
Supported, which produced a spurious error on every partner change:

```
ucsi_acpi USBC000:00: GET_CURRENT_CAM command failed
```

Fixed by skipping the command when there is nothing to update.

Fixes: da87d45b1951 ("usb: typec: ucsi: Add Thunderbolt alternate mode support")
Cc: stable@vger.kernel.org # v7.0+
Assisted-by: Codex:deepseek-v4.1-flash
Signed-off-by: Gris Ge <cnfourt@gmail.com>
---
 drivers/usb/typec/ucsi/ucsi.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index bef3f9b71d71..71b28e4df470 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -360,6 +360,15 @@ void ucsi_altmode_update_active(struct ucsi_connector *con)
 	u8 cur;
 	int i;
 
+	/*
+	 * Alternate mode support is optional, and the PPM is not required to
+	 * support GET_CURRENT_CAM when it does not support alternate modes.
+	 * There is also nothing to update when the partner has not registered
+	 * any alternate modes, so don't send the command in that case.
+	 */
+	if (!con->partner_altmode[0])
+		return;
+
 	command = UCSI_GET_CURRENT_CAM | UCSI_CONNECTOR_NUMBER(con->num);
 	ret = ucsi_send_command(con->ucsi, command, &cur, sizeof(cur));
 	if (ret < 0) {
-- 
2.55.0