Re: [PATCH v2 2/2] arm: dts: nxp: imx: Add devicetree files for M48

[Petko Manolov <petko.manolov@konsulko.com>]

On 26-09-28 09:31:56, Dinh Nguyen wrote:
> Hi Petko,
> 
> On 9/24/26 13:38, Petko Manolov wrote:
> > M48 is a heterogeneous board made by Draeger that is based on two
> > independent cpus, that are monitoring each other.  One of them is
> > imx6, the other is Altera SoCFPGA Cyclone 5.  The latter is booting
> > independently off qspi.
> > 
> > This one adds the DT for the two variants of M48 that are based on
> > imx6q and imx6dl.
> > 
> > Signed-off-by: Petko Manolov <petko.manolov@konsulko.com>
> > ---
> >   arch/arm/boot/dts/nxp/imx/Makefile            |   2 +
> >   .../boot/dts/nxp/imx/imx6dl-draeger-m48.dts   |  23 ++
> >   .../boot/dts/nxp/imx/imx6q-draeger-m48.dts    |  23 ++
> >   .../boot/dts/nxp/imx/imx6qdl-draeger-m48.dtsi | 369 ++++++++++++++++++
> >   .../boot/dts/nxp/imx/imx6qp-draeger-m48.dts   |  78 ++++
> >   5 files changed, 495 insertions(+)
> >   create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-draeger-m48.dts
> >   create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-draeger-m48.dts
> >   create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-draeger-m48.dtsi
> >   create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qp-draeger-m48.dts
> > 
> > diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
> > index 1a2539fa19b4..44b393256235 100644
> > --- a/arch/arm/boot/dts/nxp/imx/Makefile
> > +++ b/arch/arm/boot/dts/nxp/imx/Makefile
> > @@ -220,6 +220,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> >   	imx6q-dmo-edmqmx6.dtb \
> >   	imx6q-dms-ba16.dtb \
> >   	imx6q-ds.dtb \
> > +	imx6q-draeger-m48.dtb \
> > +	imx6dl-draeger-m48.dtb \
> >   	imx6q-emcon-avari.dtb \
> Please remember to run get_maintainer on the file that you're submitting.
> For this case, for the arch/arm/boot/dts/nxp, you need to also Cc'd :

Oops, my bad.  Apologies.

> Frank Li <Frank.Li@nxp.com> (maintainer:ARM/FREESCALE IMX / MXC / LAYERSCAPE
> ARM ARCHIT...)
> Sascha Hauer <s.hauer@pengutronix.de> (maintainer:ARM/FREESCALE IMX / MXC /
> LAYERSCAPE ARM ARCHIT...)
> Pengutronix Kernel Team <kernel@pengutronix.de> (reviewer:ARM/FREESCALE IMX
> / MXC / LAYERSCAPE ARM ARCHIT...)
> Fabio Estevam <festevam@gmail.com> (reviewer:ARM/FREESCALE IMX / MXC /
> LAYERSCAPE ARM ARCHIT...)

Will do.


thanks,
Petko