From: "Daniel P. Berrangé" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Stefan Hajnoczi" <stefanha@redhat.com>,
"Daniel P. Berrangé" <berrange@redhat.com>
Subject: [PATCH 17/20] trace: remove "disable" property from trace files
Date: Thu, 1 Oct 2026 16:12:25 +0100 [thread overview]
Message-ID: <20261001151228.3373747-18-berrange@redhat.com> (raw)
In-Reply-To: <20261001151228.3373747-1-berrange@redhat.com>
The scenarios are not significant enough to justify its use
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
hw/display/trace-events | 2 +-
target/hppa/trace-events | 28 ++++++++++++++--------------
2 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/hw/display/trace-events b/hw/display/trace-events
index c5e7e42af23..223a085922b 100644
--- a/hw/display/trace-events
+++ b/hw/display/trace-events
@@ -60,7 +60,7 @@ virtio_gpu_dec_inflight_fences(uint32_t inflight) "in-flight- %u"
virtio_gpu_cmd_suspended(uint32_t cmd) "cmd 0x%x"
# qxl.c
-disable qxl_io_write_vga(int qid, const char *mode, uint32_t addr, uint32_t val) "%d %s addr=%u val=%u"
+qxl_io_write_vga(int qid, const char *mode, uint32_t addr, uint32_t val) "%d %s addr=%u val=%u"
qxl_create_guest_primary(int qid, uint32_t width, uint32_t height, uint64_t mem, uint32_t format, uint32_t position) "%d %ux%u mem=0x%" PRIx64 " %u,%u"
qxl_create_guest_primary_rest(int qid, int32_t stride, uint32_t type, uint32_t flags) "%d %d,%d,%d"
qxl_destroy_primary(int qid) "%d"
diff --git a/target/hppa/trace-events b/target/hppa/trace-events
index 01761a4559b..7c897610a9e 100644
--- a/target/hppa/trace-events
+++ b/target/hppa/trace-events
@@ -1,19 +1,19 @@
# See docs/devel/tracing.rst for syntax documentation.
# mem_helper.c
-disable hppa_tlb_flush_ent(void *env, void *ent, uint64_t va_b, uint64_t va_e, uint64_t pa) "env=%p ent=%p va_b=0x%lx va_e=0x%lx pa=0x%" PRIx64
-disable hppa_tlb_find_entry(void *env, void *ent, int valid, uint64_t va_b, uint64_t va_e, uint64_t pa) "env=%p ent=%p valid=%d va_b=0x%lx va_e=0x%lx pa=0x%" PRIx64
-disable hppa_tlb_find_entry_not_found(void *env, uint64_t addr) "env=%p addr=%08lx"
-disable hppa_tlb_get_physical_address(void *env, int ret, int prot, uint64_t addr, uint64_t phys) "env=%p ret=%d prot=%d addr=0x%lx phys=0x%lx"
-disable hppa_tlb_fill_excp(void *env, uint64_t addr, int size, int type, int mmu_idx) "env=%p addr=0x%lx size=%d type=%d mmu_idx=%d"
-disable hppa_tlb_fill_success(void *env, uint64_t addr, uint64_t phys, int size, int type, int mmu_idx) "env=%p addr=0x%lx phys=0x%lx size=%d type=%d mmu_idx=%d"
-disable hppa_tlb_itlba(void *env, void *ent, uint64_t va_b, uint64_t va_e, uint64_t pa) "env=%p ent=%p va_b=0x%lx va_e=0x%lx pa=0x%" PRIx64
-disable hppa_tlb_itlbp(void *env, void *ent, int access_id, int u, int pl2, int pl1, int type, int b, int d, int t) "env=%p ent=%p access_id=%x u=%d pl2=%d pl1=%d type=%d b=%d d=%d t=%d"
-disable hppa_tlb_ptlb(void *env) "env=%p"
-disable hppa_tlb_ptlb_local(void *env) "env=%p"
-disable hppa_tlb_ptlbe(void *env) "env=%p"
-disable hppa_tlb_lpa_success(void *env, uint64_t addr, uint64_t phys) "env=%p addr=0x%lx phys=0x%lx"
-disable hppa_tlb_lpa_failed(void *env, uint64_t addr) "env=%p addr=0x%lx"
+hppa_tlb_flush_ent(void *env, void *ent, uint64_t va_b, uint64_t va_e, uint64_t pa) "env=%p ent=%p va_b=0x%lx va_e=0x%lx pa=0x%" PRIx64
+hppa_tlb_find_entry(void *env, void *ent, int valid, uint64_t va_b, uint64_t va_e, uint64_t pa) "env=%p ent=%p valid=%d va_b=0x%lx va_e=0x%lx pa=0x%" PRIx64
+hppa_tlb_find_entry_not_found(void *env, uint64_t addr) "env=%p addr=%08lx"
+hppa_tlb_get_physical_address(void *env, int ret, int prot, uint64_t addr, uint64_t phys) "env=%p ret=%d prot=%d addr=0x%lx phys=0x%lx"
+hppa_tlb_fill_excp(void *env, uint64_t addr, int size, int type, int mmu_idx) "env=%p addr=0x%lx size=%d type=%d mmu_idx=%d"
+hppa_tlb_fill_success(void *env, uint64_t addr, uint64_t phys, int size, int type, int mmu_idx) "env=%p addr=0x%lx phys=0x%lx size=%d type=%d mmu_idx=%d"
+hppa_tlb_itlba(void *env, void *ent, uint64_t va_b, uint64_t va_e, uint64_t pa) "env=%p ent=%p va_b=0x%lx va_e=0x%lx pa=0x%" PRIx64
+hppa_tlb_itlbp(void *env, void *ent, int access_id, int u, int pl2, int pl1, int type, int b, int d, int t) "env=%p ent=%p access_id=%x u=%d pl2=%d pl1=%d type=%d b=%d d=%d t=%d"
+hppa_tlb_ptlb(void *env) "env=%p"
+hppa_tlb_ptlb_local(void *env) "env=%p"
+hppa_tlb_ptlbe(void *env) "env=%p"
+hppa_tlb_lpa_success(void *env, uint64_t addr, uint64_t phys) "env=%p addr=0x%lx phys=0x%lx"
+hppa_tlb_lpa_failed(void *env, uint64_t addr) "env=%p addr=0x%lx"
# op_helper.c
-disable hppa_tlb_probe(uint64_t addr, int level, int want) "addr=0x%lx level=%d want=%d"
+hppa_tlb_probe(uint64_t addr, int level, int want) "addr=0x%lx level=%d want=%d"
--
2.55.0
next prev parent reply other threads:[~2026-10-01 15:14 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-01 15:12 [PATCH 00/20] trace: bugfixes, cleanups and optimizations Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 01/20] osdep: add 'ignore_value(x)' macro Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 02/20] trace: use 'ignore_value()' instead of a dummy variable Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 03/20] trace: fix handling of char** in UST backend Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 04/20] hw/xen: replace "long unsigned int" with "unsigned long " for dtrace Daniel P. Berrangé
2026-10-01 17:56 ` Philippe Mathieu-Daudé
2026-10-01 15:12 ` [PATCH 05/20] trace: block use of "long int" " Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 06/20] trace: drop unused trace_event_set_state_dynamic_init() Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 07/20] trace: remove obsolete references to vcpu property Daniel P. Berrangé
2026-10-01 17:58 ` Philippe Mathieu-Daudé
2026-10-01 15:12 ` [PATCH 08/20] trace: drop 'id' from TraceEvent struct when not required Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 09/20] trace: change "DSTATE" variables from uint16_t to uint8_t Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 10/20] trace: add testing of 'nop' trace backend Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 11/20] trace: don't emit TraceEvent structs when 'nop' backend is used Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 12/20] trace: add test of generation with all backends enabled Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 13/20] trace: remove redundant headers from simple trace backend code Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 14/20] audio: remove mistaken use of trace_event_get_state() Daniel P. Berrangé
2026-10-01 18:00 ` Philippe Mathieu-Daudé
2026-10-01 19:14 ` marcandre.lureau
2026-10-02 7:12 ` Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 15/20] hw/ppc: " Daniel P. Berrangé
2026-10-01 18:01 ` Philippe Mathieu-Daudé
2026-10-01 15:12 ` [PATCH 16/20] trace: include qemu_loglevel_mask(LOG_TRACE) in guard Daniel P. Berrangé
2026-10-02 10:45 ` Paolo Bonzini
2026-10-02 11:03 ` Daniel P. Berrangé
2026-10-02 14:49 ` Paolo Bonzini
2026-10-05 12:08 ` Daniel P. Berrangé
2026-10-01 15:12 ` Daniel P. Berrangé [this message]
2026-10-01 15:12 ` [PATCH 18/20] trace: stop tracking static disabled state Daniel P. Berrangé
2026-10-01 19:14 ` marcandre.lureau
2026-10-02 9:22 ` Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 19/20] trace: remove parsing of "disable" event property Daniel P. Berrangé
2026-10-01 15:12 ` [PATCH 20/20] trace: remove 'trace_event_get_state' wrapper Daniel P. Berrangé
2026-10-01 19:14 ` [PATCH 00/20] trace: bugfixes, cleanups and optimizations marcandre.lureau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261001151228.3373747-18-berrange@redhat.com \
--to=berrange@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.