From: Tim JH Chen <tim770802@gmail.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, andrew+netdev@lunn.ch, horms@kernel.org,
ilpo.jarvinen@linux.intel.com, johannes@sipsolutions.net,
loic.poulain@oss.qualcomm.com, ryazanov.s.a@gmail.com,
chandrashekar.devegowda@intel.com, haijun.liu@mediatek.com,
ricardo.martinez@linux.intel.com, linux-kernel@vger.kernel.org,
tim.jh.chen@wnc.com.tw, Chih.Hung.Huang@wnc.com.tw,
Tim JH Chen <tim770802@gmail.com>
Subject: [PATCH net v6 1/4] net: wwan: t7xx: fix runtime PM usage count underflow on -EACCES
Date: Fri, 2 Oct 2026 09:46:35 +0800 [thread overview]
Message-ID: <20261002014638.47981-2-tim770802@gmail.com> (raw)
In-Reply-To: <20261002014638.47981-1-tim770802@gmail.com>
t7xx_dpmaif_tx_hw_push_thread(), t7xx_dpmaif_tx_done() and
t7xx_dpmaif_bat_release_work() treat -EACCES from
pm_runtime_resume_and_get() as success and proceed to access the
hardware. That is intentional, but pm_runtime_resume_and_get() has
already dropped the usage count it took before returning -EACCES, so the
unconditional pm_runtime_put_autosuspend() at the end of each context
drops a reference that was never held and drives the usage count
negative.
Only balance the reference when it was actually taken.
Fixes: 46e8f49ed7b3 ("net: wwan: t7xx: Introduce power management")
Signed-off-by: Tim JH Chen <tim770802@gmail.com>
---
drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c | 3 ++-
drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c | 10 ++++++++--
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c b/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c
index 5af90ca6e063..0e1174ee611d 100644
--- a/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c
+++ b/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c
@@ -1082,7 +1082,8 @@ static void t7xx_dpmaif_bat_release_work(struct work_struct *work)
}
t7xx_pci_enable_sleep(dpmaif_ctrl->t7xx_dev);
- pm_runtime_put_autosuspend(dpmaif_ctrl->dev);
+ if (ret != -EACCES)
+ pm_runtime_put_autosuspend(dpmaif_ctrl->dev);
}
int t7xx_dpmaif_bat_rel_wq_alloc(struct dpmaif_ctrl *dpmaif_ctrl)
diff --git a/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c b/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c
index 236d632cf591..bd6116a8c541 100644
--- a/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c
+++ b/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c
@@ -160,12 +160,16 @@ static void t7xx_dpmaif_tx_done(struct work_struct *work)
struct dpmaif_tx_queue *txq = container_of(work, struct dpmaif_tx_queue, dpmaif_tx_work);
struct dpmaif_ctrl *dpmaif_ctrl = txq->dpmaif_ctrl;
struct dpmaif_hw_info *hw_info;
+ bool pm_ref;
int ret;
ret = pm_runtime_resume_and_get(dpmaif_ctrl->dev);
if (ret < 0 && ret != -EACCES)
return;
+ /* -EACCES means no reference was taken; only balance a real one. */
+ pm_ref = !ret;
+
/* The device may be in low power state. Disable sleep if needed */
t7xx_pci_disable_sleep(dpmaif_ctrl->t7xx_dev);
if (t7xx_pci_sleep_disable_complete(dpmaif_ctrl->t7xx_dev)) {
@@ -185,7 +189,8 @@ static void t7xx_dpmaif_tx_done(struct work_struct *work)
}
t7xx_pci_enable_sleep(dpmaif_ctrl->t7xx_dev);
- pm_runtime_put_autosuspend(dpmaif_ctrl->dev);
+ if (pm_ref)
+ pm_runtime_put_autosuspend(dpmaif_ctrl->dev);
}
static void t7xx_setup_msg_drb(struct dpmaif_ctrl *dpmaif_ctrl, unsigned int q_num,
@@ -467,7 +472,8 @@ static int t7xx_dpmaif_tx_hw_push_thread(void *arg)
t7xx_pci_disable_sleep(dpmaif_ctrl->t7xx_dev);
t7xx_do_tx_hw_push(dpmaif_ctrl);
t7xx_pci_enable_sleep(dpmaif_ctrl->t7xx_dev);
- pm_runtime_put_autosuspend(dpmaif_ctrl->dev);
+ if (ret != -EACCES)
+ pm_runtime_put_autosuspend(dpmaif_ctrl->dev);
}
return 0;
--
2.43.0
next prev parent reply other threads:[~2026-10-02 1:46 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-02 1:46 [PATCH net v6 0/4] net: wwan: t7xx: fix DPMAIF data path vs system PM suspend Tim JH Chen
2026-10-02 1:46 ` Tim JH Chen [this message]
2026-10-06 2:13 ` [PATCH net v6 1/4] net: wwan: t7xx: fix runtime PM usage count underflow on -EACCES netdev-bot+sashiko
2026-10-02 1:46 ` [PATCH net v6 2/4] net: wwan: t7xx: do not exit the TX push kthread on resume failure Tim JH Chen
2026-10-02 1:46 ` [PATCH net v6 3/4] net: wwan: t7xx: fix race between TX/RX data path and system PM suspend Tim JH Chen
2026-10-06 2:13 ` netdev-bot+sashiko
2026-10-02 1:46 ` [PATCH net v6 4/4] net: wwan: t7xx: complete NAPI on the not-started RX poll early return Tim JH Chen
2026-10-06 2:13 ` netdev-bot+sashiko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261002014638.47981-2-tim770802@gmail.com \
--to=tim770802@gmail.com \
--cc=Chih.Hung.Huang@wnc.com.tw \
--cc=andrew+netdev@lunn.ch \
--cc=chandrashekar.devegowda@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=haijun.liu@mediatek.com \
--cc=horms@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=johannes@sipsolutions.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=loic.poulain@oss.qualcomm.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=ricardo.martinez@linux.intel.com \
--cc=ryazanov.s.a@gmail.com \
--cc=tim.jh.chen@wnc.com.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.