[PATCH net-next v8 4/7] net: pse-pd: si3474: use dev_err_probe() for controller registration

[Carlo Szelinsky <github@szelinsky.de>]

si3474_i2c_probe() reports a failed devm_pse_controller_register() with
dev_err() and returns the error. That is fine as long as registration
only fails for real, but a follow-up change makes it return
-EPROBE_DEFER while a PI's vpwr supply provider has not registered yet.

skyworks,si3474.yaml puts vpwr-supply in the pse-pi nodes. A supply
named from a child node only gives the controller a SYNC_STATE_ONLY
proxy link in fw_devlink, which does not hold its probe back, so si3474
can probe before that regulator and would then log an error on every
deferred probe retry until it appears.

Use dev_err_probe(), which stays quiet for -EPROBE_DEFER and records the
reason for devices_deferred instead, and prints the error symbolically
rather than as a raw hex value.

Signed-off-by: Carlo Szelinsky <github@szelinsky.de>
---
 drivers/net/pse-pd/si3474.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/pse-pd/si3474.c b/drivers/net/pse-pd/si3474.c
index 1845b9c51cf7..91800f39971f 100644
--- a/drivers/net/pse-pd/si3474.c
+++ b/drivers/net/pse-pd/si3474.c
@@ -541,10 +541,9 @@ static int si3474_i2c_probe(struct i2c_client *client)
 	priv->pcdev.nr_lines = SI3474_MAX_CHANS;
 
 	ret = devm_pse_controller_register(dev, &priv->pcdev);
-	if (ret) {
-		dev_err(dev, "Failed to register PSE controller: 0x%x\n", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to register PSE controller\n");
 
 	return 0;
 }
-- 
2.43.0