From: Rokas Juras <asrokasjuras@gmail.com>
To: netdev@vger.kernel.org
Cc: andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@kernel.org,
kuba@kernel.org, pabeni@redhat.com, gregkh@linuxfoundation.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net] rndis_host: enable RX aggregation for OnePlus Nord CE 2
Date: Mon, 5 Oct 2026 10:48:52 +0300 [thread overview]
Message-ID: <20261005074852.76818-1-asrokasjuras@gmail.com> (raw)
USB tethering on the OnePlus Nord CE 2 (IV2201, USB ID 22d9:2766)
running Android 13 has download speeds of approximately 2mbps
with the default 2048-byte receive limit.
The phone's published RNDIS code only enables packet batching
when the computer reports a receive limit above 2048 bytes.
Testing shows that increasing this limit to 2560 bytes
restores normal speeds.
Add a quirk for USB device 22d9:2766 to use and advertise a
receive buffer of at least 16 KiB. This fits the phone code's default
batch of ten packets at a 1500-byte MTU.
Tested on 7.3.0-rc5 with the affected phone, including reconnecting
USB tethering. Download speeds with the change exceed 100mpbs.
Fixes: 7e99eeddb35c ("rndis_host: support WM6 devices as modems")
Link: https://github.com/OnePlusOSS/android_kernel_oneplus_mt6877/blob/3c1e3d432d0c35afa7fded974b50fa6617219e0f/drivers/usb/gadget/function/f_rndis.c#L538-L551
Link: https://github.com/OnePlusOSS/android_kernel_oneplus_mt6877/blob/3c1e3d432d0c35afa7fded974b50fa6617219e0f/drivers/usb/gadget/function/u_ether.c#L869-L874
Assisted-by: LLM
Signed-off-by: Rokas Juras <asrokasjuras@gmail.com>
---
drivers/net/usb/rndis_host.c | 21 +++++++++++++++++++++
include/linux/usb/rndis_host.h | 5 +++--
2 files changed, 24 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 37d4865f5..b001bc834 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -345,6 +345,11 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags)
dev->rx_urb_size = dev->hard_mtu + (dev->maxpacket + 1);
dev->rx_urb_size &= ~(dev->maxpacket - 1);
+
+ /* some devices require a receive limit above 2048 for RX aggregation */
+ if (dev->driver_info->data & RNDIS_DRIVER_DATA_RX_AGGREGATION)
+ dev->rx_urb_size = max_t(size_t, dev->rx_urb_size, 16 * 1024);
+
u.init->max_transfer_size = cpu_to_le32(dev->rx_urb_size);
net->netdev_ops = &rndis_netdev_ops;
@@ -612,6 +617,17 @@ static const struct driver_info rndis_info = {
.tx_fixup = rndis_tx_fixup,
};
+static const struct driver_info rndis_rx_aggregation_info = {
+ .description = "RNDIS device",
+ .flags = FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+ .data = RNDIS_DRIVER_DATA_RX_AGGREGATION,
+ .bind = rndis_bind,
+ .unbind = rndis_unbind,
+ .status = rndis_status,
+ .rx_fixup = rndis_rx_fixup,
+ .tx_fixup = rndis_tx_fixup,
+};
+
static const struct driver_info rndis_poll_status_info = {
.description = "RNDIS device (poll status before control)",
.flags = FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT,
@@ -649,6 +665,11 @@ static const struct driver_info rndis_info_lowpower = {
static const struct usb_device_id products [] = {
{
+ /* OnePlus Nord CE 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x22d9, 0x2766,
+ USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
+ .driver_info = (unsigned long)&rndis_rx_aggregation_info,
+}, {
/* 2Wire HomePortal 1000SW */
USB_DEVICE_AND_INTERFACE_INFO(0x1630, 0x0042,
USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
index 489cfb1d0..3eaf57a9b 100644
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@@ -182,8 +182,9 @@ struct rndis_keepalive_c { /* IN (optionally OUT) */
#define FLAG_RNDIS_PHYM_WIRELESS 0x0002
/* Flags for driver_info::data */
-#define RNDIS_DRIVER_DATA_POLL_STATUS 1 /* poll status before control */
-#define RNDIS_DRIVER_DATA_DST_MAC_FIXUP 2 /* device ignores configured MAC address */
+#define RNDIS_DRIVER_DATA_POLL_STATUS 1 /* poll status before control */
+#define RNDIS_DRIVER_DATA_DST_MAC_FIXUP 2 /* device ignores configured MAC address */
+#define RNDIS_DRIVER_DATA_RX_AGGREGATION 4 /* needs RX limit > 2048 */
extern void rndis_status(struct usbnet *dev, struct urb *urb);
extern int
--
2.55.0
next reply other threads:[~2026-10-05 7:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-05 7:48 Rokas Juras [this message]
2026-10-09 0:00 ` [PATCH net] rndis_host: enable RX aggregation for OnePlus Nord CE 2 patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261005074852.76818-1-asrokasjuras@gmail.com \
--to=asrokasjuras@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.