[PATCH v3 04/11] pinctrl: sunxi: add Allwinner B288 pin controller driver

[Pablo Mazzini <pmazzini@gmail.com>]

80 pins across ports B, C, D, F and G; the mux values come from the DT.
Port C has no external interrupts. PH0 is BSP FPGA-only and omitted.

Signed-off-by: Pablo Mazzini <pmazzini@gmail.com>
---
 drivers/pinctrl/sunxi/Kconfig              | 10 +++++
 drivers/pinctrl/sunxi/Makefile             |  1 +
 drivers/pinctrl/sunxi/pinctrl-sun8i-b288.c | 49 ++++++++++++++++++++++
 3 files changed, 60 insertions(+)
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-b288.c

diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index dc62eba96348..a08186133090 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -56,6 +56,16 @@ config PINCTRL_SUN8I_A23_R
 	default MACH_SUN8I
 	select PINCTRL_SUNXI
 
+config PINCTRL_SUN8I_B288
+	bool "Support for the Allwinner B288 PIO"
+	default MACH_SUN8I
+	select PINCTRL_SUNXI
+	help
+	  Say Y here to enable pin controller and GPIO support for the
+	  Allwinner B288 (sun8iw10p1) SoC, as used in e-book readers such
+	  as the PocketBook Verse. This covers ports B, C, D, F and G,
+	  including the four banks of external interrupt capable pins.
+
 config PINCTRL_SUN8I_H3
 	bool "Support for the Allwinner H3 PIO"
 	default MACH_SUN8I
diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
index 951b3f1e4b4f..5129c0f19f3e 100644
--- a/drivers/pinctrl/sunxi/Makefile
+++ b/drivers/pinctrl/sunxi/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_PINCTRL_SUN50I_A100)	+= pinctrl-sun50i-a100.o
 obj-$(CONFIG_PINCTRL_SUN50I_A100_R)	+= pinctrl-sun50i-a100-r.o
 obj-$(CONFIG_PINCTRL_SUN8I_A83T)	+= pinctrl-sun8i-a83t.o
 obj-$(CONFIG_PINCTRL_SUN8I_A83T_R)	+= pinctrl-sun8i-a83t-r.o
+obj-$(CONFIG_PINCTRL_SUN8I_B288)	+= pinctrl-sun8i-b288.o
 obj-$(CONFIG_PINCTRL_SUN8I_H3)		+= pinctrl-sun8i-h3.o
 obj-$(CONFIG_PINCTRL_SUN8I_H3_R)	+= pinctrl-sun8i-h3-r.o
 obj-$(CONFIG_PINCTRL_SUN8I_V3S)		+= pinctrl-sun8i-v3s.o
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-b288.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-b288.c
new file mode 100644
index 000000000000..f973c2b3f2eb
--- /dev/null
+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-b288.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Allwinner B288 (sun8iw10p1) SoC pinctrl driver.
+ *
+ * Bank sizes and the interrupt mux derived from Allwinner's BSP driver
+ * pinctrl-sun8iw10p1.c, which is:
+ * Copyright (C) 2014 Jackie Hwang <huangshr@allwinnertech.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-sunxi.h"
+
+/* PH0 exists only on the BSP's FPGA platform and is omitted. */
+static const u8 b288_nr_bank_pins[SUNXI_PINCTRL_MAX_BANKS] =
+/*	  PA  PB  PC  PD  PE  PF  PG */
+	{  0, 17, 15, 29,  0,  7, 12 };
+
+static const u8 b288_irq_bank_muxes[SUNXI_PINCTRL_MAX_BANKS] =
+/*	  PA  PB  PC  PD  PE  PF  PG */
+	{  0,  6,  0,  6,  0,  6,  6 };
+
+static struct sunxi_pinctrl_desc b288_pinctrl_data = {
+	.irq_banks	= 4,
+};
+
+static int b288_pinctrl_probe(struct platform_device *pdev)
+{
+	return sunxi_pinctrl_dt_table_init(pdev, b288_nr_bank_pins,
+					   b288_irq_bank_muxes,
+					   &b288_pinctrl_data, 0);
+}
+
+static const struct of_device_id b288_pinctrl_match[] = {
+	{ .compatible = "allwinner,sun8i-b288-pinctrl", },
+	{}
+};
+
+static struct platform_driver b288_pinctrl_driver = {
+	.probe	= b288_pinctrl_probe,
+	.driver	= {
+		.name		= "sun8i-b288-pinctrl",
+		.of_match_table	= b288_pinctrl_match,
+	},
+};
+builtin_platform_driver(b288_pinctrl_driver);
-- 
2.52.0