From: David Carlier <devnexen@gmail.com>
To: linux-media@vger.kernel.org
Cc: dan.scally@ideasonboard.com, jacopo.mondi@ideasonboard.com,
mchehab@kernel.org, hverkuil+cisco@kernel.org,
linux-kernel@vger.kernel.org, David Carlier <devnexen@gmail.com>,
stable@vger.kernel.org
Subject: [PATCH] media: mali-c55: Disable colour space conversion for RGB outputs
Date: Wed, 7 Oct 2026 00:42:27 +0100 [thread overview]
Message-ID: <20261006234242.11934-1-devnexen@gmail.com> (raw)
The colour space conversion block is only programmed for YUV formats,
and its configuration is kept across streaming sessions. An RGB stream
started after a YUV one thus still converts its output to YUV.
Clear the conversion configuration for non-YUV formats.
Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: David Carlier <devnexen@gmail.com>
---
drivers/media/platform/arm/mali-c55/mali-c55-capture.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-capture.c b/drivers/media/platform/arm/mali-c55/mali-c55-capture.c
index ff01553026fb..2425a069a939 100644
--- a/drivers/media/platform/arm/mali-c55/mali-c55-capture.c
+++ b/drivers/media/platform/arm/mali-c55/mali-c55-capture.c
@@ -577,6 +577,10 @@ static void mali_c55_cap_dev_format_configure(struct mali_c55_cap_dev *cap_dev)
MALI_C55_REG_CS_CONV_CONFIG,
MALI_C55_CS_CONV_FILTER_MASK,
MALI_C55_CS_CONV_FILTER_ENABLE);
+ } else {
+ /* Don't inherit the conversion set up by a previous YUV stream. */
+ mali_c55_cap_dev_write(cap_dev, MALI_C55_REG_CS_CONV_CONFIG,
+ 0);
}
}
--
2.55.0
next reply other threads:[~2026-10-06 23:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-06 23:42 David Carlier [this message]
2026-10-07 9:11 ` [PATCH] media: mali-c55: Disable colour space conversion for RGB outputs Dan Scally
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261006234242.11934-1-devnexen@gmail.com \
--to=devnexen@gmail.com \
--cc=dan.scally@ideasonboard.com \
--cc=hverkuil+cisco@kernel.org \
--cc=jacopo.mondi@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.