From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,vbabka@kernel.org,surenb@google.com,rppt@kernel.org,qi.zheng@linux.dev,osalvador@suse.de,mhocko@suse.com,ljs@kernel.org,liam@infradead.org,david.laight.linux@gmail.com,david@kernel.org,songmuchun@bytedance.com,akpm@linux-foundation.org
Subject: [merged mm-stable] mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support.patch removed from -mm tree
Date: Tue, 06 Oct 2026 17:49:23 -0700 [thread overview]
Message-ID: <20261007004923.8C96A1F0089C@smtp.kernel.org> (raw)
The quilt patch titled
Subject: mm/sparse-vmemmap: remove SPARSEMEM_VMEMMAP_PREINIT support
has been removed from the -mm tree. Its filename was
mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support.patch
This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: Muchun Song <songmuchun@bytedance.com>
Subject: mm/sparse-vmemmap: remove SPARSEMEM_VMEMMAP_PREINIT support
Date: Thu, 10 Sep 2026 14:32:50 +0800
SPARSEMEM_VMEMMAP_PREINIT existed only to support HugeTLB's early vmemmap
optimization setup.
Now that HugeTLB bootmem vmemmap optimization uses the common
section-based sparse-vmemmap path, the sparse initialization code no
longer needs a separate pre-initialization mechanism for vmemmap
population.
Remove the related Kconfig symbols, section flag, and empty early hook, so
present sections always go through the normal sparse setup path.
Link: https://lore.kernel.org/20260910063256.64386-12-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Qi Zheng <qi.zheng@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
---
arch/x86/Kconfig | 1 -
fs/Kconfig | 1 -
include/linux/mmzone.h | 25 -------------------------
mm/Kconfig | 5 -----
mm/sparse-vmemmap.c | 13 -------------
mm/sparse.c | 23 ++++++++---------------
6 files changed, 8 insertions(+), 60 deletions(-)
--- a/arch/x86/Kconfig~mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support
+++ a/arch/x86/Kconfig
@@ -150,7 +150,6 @@ config X86
select ARCH_WANT_LD_ORPHAN_WARN
select ARCH_WANT_OPTIMIZE_DAX_VMEMMAP if X86_64
select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP if X86_64
- select ARCH_WANT_HUGETLB_VMEMMAP_PREINIT if X86_64
select ARCH_WANTS_THP_SWAP if X86_64
select ARCH_HAS_PARANOID_L1D_FLUSH
select ARCH_WANT_IRQS_OFF_ACTIVATE_MM
--- a/fs/Kconfig~mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support
+++ a/fs/Kconfig
@@ -278,7 +278,6 @@ config HUGETLB_PAGE_OPTIMIZE_VMEMMAP
def_bool HUGETLB_PAGE
depends on ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
depends on SPARSEMEM_VMEMMAP
- select SPARSEMEM_VMEMMAP_PREINIT if ARCH_WANT_HUGETLB_VMEMMAP_PREINIT
config HUGETLB_PMD_PAGE_TABLE_SHARING
def_bool HUGETLB_PAGE
--- a/include/linux/mmzone.h~mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support
+++ a/include/linux/mmzone.h
@@ -2096,9 +2096,6 @@ enum {
#ifdef CONFIG_ZONE_DEVICE
SECTION_TAINT_ZONE_DEVICE_BIT,
#endif
-#ifdef CONFIG_SPARSEMEM_VMEMMAP_PREINIT
- SECTION_IS_VMEMMAP_PREINIT_BIT,
-#endif
SECTION_MAP_LAST_BIT,
};
@@ -2109,9 +2106,6 @@ enum {
#ifdef CONFIG_ZONE_DEVICE
#define SECTION_TAINT_ZONE_DEVICE BIT(SECTION_TAINT_ZONE_DEVICE_BIT)
#endif
-#ifdef CONFIG_SPARSEMEM_VMEMMAP_PREINIT
-#define SECTION_IS_VMEMMAP_PREINIT BIT(SECTION_IS_VMEMMAP_PREINIT_BIT)
-#endif
#define SECTION_MAP_MASK (~(BIT(SECTION_MAP_LAST_BIT) - 1))
#define SECTION_NID_SHIFT SECTION_MAP_LAST_BIT
@@ -2166,24 +2160,6 @@ static inline int online_device_section(
}
#endif
-#ifdef CONFIG_SPARSEMEM_VMEMMAP_PREINIT
-static inline int preinited_vmemmap_section(const struct mem_section *section)
-{
- return (section &&
- (section->section_mem_map & SECTION_IS_VMEMMAP_PREINIT));
-}
-
-void sparse_vmemmap_init_nid_early(int nid);
-#else
-static inline int preinited_vmemmap_section(const struct mem_section *section)
-{
- return 0;
-}
-static inline void sparse_vmemmap_init_nid_early(int nid)
-{
-}
-#endif
-
static inline int online_section_nr(unsigned long nr)
{
return online_section(__nr_to_section(nr));
@@ -2385,7 +2361,6 @@ static inline unsigned long next_present
#endif
#else
-#define sparse_vmemmap_init_nid_early(_nid) do {} while (0)
#define pfn_in_present_section pfn_valid
#endif /* CONFIG_SPARSEMEM */
--- a/mm/Kconfig~mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support
+++ a/mm/Kconfig
@@ -461,8 +461,6 @@ config SPARSEMEM_VMEMMAP
pfn_to_page and page_to_pfn operations. This is the most
efficient option when sufficient kernel resources are available.
-config SPARSEMEM_VMEMMAP_PREINIT
- bool
#
# Select this config option from the architecture Kconfig, if it is preferred
# to enable the feature of HugeTLB/dev_dax vmemmap optimization.
@@ -473,9 +471,6 @@ config ARCH_WANT_OPTIMIZE_DAX_VMEMMAP
config ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
bool
-config ARCH_WANT_HUGETLB_VMEMMAP_PREINIT
- bool
-
config HAVE_MEMBLOCK_PHYS_MAP
bool
--- a/mm/sparse.c~mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support
+++ a/mm/sparse.c
@@ -283,27 +283,20 @@ static void __init sparse_init_nid(int n
if (sparse_usage_init(nid, map_count))
panic("Failed to allocate usemap for node %d\n", nid);
- sparse_vmemmap_init_nid_early(nid);
-
for_each_present_section_nr(pnum_begin, pnum) {
- struct mem_section *ms;
unsigned long pfn = section_nr_to_pfn(pnum);
+ struct page *map;
if (pnum >= pnum_end)
break;
- ms = __nr_to_section(pnum);
- if (!preinited_vmemmap_section(ms)) {
- struct page *map;
-
- map = __populate_section_memmap(pfn, PAGES_PER_SECTION,
- nid, NULL, NULL);
- if (!map)
- panic("Failed to allocate memmap for section %lu\n", pnum);
- memmap_boot_pages_add(section_nr_vmemmap_pages(pfn, PAGES_PER_SECTION,
- NULL, NULL));
- sparse_init_early_section(nid, map, pnum, 0);
- }
+ map = __populate_section_memmap(pfn, PAGES_PER_SECTION,
+ nid, NULL, NULL);
+ if (!map)
+ panic("Failed to allocate memmap for section %lu\n", pnum);
+ memmap_boot_pages_add(section_nr_vmemmap_pages(pfn, PAGES_PER_SECTION,
+ NULL, NULL));
+ sparse_init_early_section(nid, map, pnum, 0);
}
sparse_usage_fini();
}
--- a/mm/sparse-vmemmap.c~mm-sparse-vmemmap-remove-sparsemem_vmemmap_preinit-support
+++ a/mm/sparse-vmemmap.c
@@ -594,19 +594,6 @@ struct page * __meminit __populate_secti
return pfn_to_page(pfn);
}
-#ifdef CONFIG_SPARSEMEM_VMEMMAP_PREINIT
-/*
- * This is called just before initializing sections for a NUMA node.
- * Any special initialization that needs to be done before the
- * generic initialization can be done from here. Sections that
- * are initialized in hooks called from here will be skipped by
- * the generic initialization.
- */
-void __init sparse_vmemmap_init_nid_early(int nid)
-{
-}
-#endif
-
static void subsection_mask_set(unsigned long *map, unsigned long pfn,
unsigned long nr_pages)
{
_
Patches currently in -mm which might be from songmuchun@bytedance.com are
reply other threads:[~2026-10-07 0:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261007004923.8C96A1F0089C@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=david.laight.linux@gmail.com \
--cc=david@kernel.org \
--cc=liam@infradead.org \
--cc=ljs@kernel.org \
--cc=mhocko@suse.com \
--cc=mm-commits@vger.kernel.org \
--cc=osalvador@suse.de \
--cc=qi.zheng@linux.dev \
--cc=rppt@kernel.org \
--cc=songmuchun@bytedance.com \
--cc=surenb@google.com \
--cc=vbabka@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.