From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from smtp1.osuosl.org (smtp1.osuosl.org [140.211.166.138]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 9D8D1CA601F for ; Fri, 9 Oct 2026 19:55:01 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by smtp1.osuosl.org (Postfix) with ESMTP id 66AA681549; Fri, 9 Oct 2026 19:55:01 +0000 (UTC) X-Virus-Scanned: amavis at osuosl.org Received: from smtp1.osuosl.org ([127.0.0.1]) by localhost (smtp1.osuosl.org [127.0.0.1]) (amavis, port 10024) with ESMTP id 0QAWAvMPAtdQ; Fri, 9 Oct 2026 19:54:52 +0000 (UTC) ARC-Filter: OpenARC Filter v1.3.2 smtp1.osuosl.org F09E581539 Authentication-Results: smtp1.osuosl.org; arc=pass header.oldest-pass=0 smtp.remote-ip=140.211.166.142 ARC-Seal: i=2; d=osuosl.org; s=arc; a=rsa-sha256; cv=pass; t=1791575691; b=d6xncSFuE0GZT1EUHPxwDa47kI7zQi1HelDv4lplG2E5KsItV/vguLJqxi5yqYgYthnA +MD65XDcrVGTi+Rrpnb4esiQUps1PisptcNtCkykw/srR/O7gLtSBud8gRNL644NW2NDb gq4JzpNoTqcGNb1YJx6AJ3MgtZWzkAJJZQA1gvO0MYyABxt/u9rm6EwSnjmijiiMMgoLU sK9stNqYfJbjtScYWiqYtlRyT+rScnXn9EGy+dG3hcqjaXtNG1IOHSvsvKiLuP7Lc3q6x 4LIVhjsxnT2ISGKAc/kdyO5S4BzciJNH3MZsJFIbn+Z1+RD2cr/47KiT5cdGQPCEj7g== ARC-Message-Signature: i=2; d=osuosl.org; s=arc; a=rsa-sha256; c=relaxed/relaxed; t=1791575691; h=X-Comment:DKIM-Signature:X-Original-To:Delivered-To:Received: Received:X-Virus-Scanned:X-Spam-Flag:X-Spam-Score:X-Spam-Level: X-Spam-Status:Received:ARC-Filter:Received-SPF:Received: DKIM-Signature:DKIM-Signature:From:To:Cc:Subject:Date:Message-ID: X-Mailer:In-Reply-To:References:MIME-Version:Content-Type: Content-Transfer-Encoding:X-Mailman-Approved-At:X-BeenThere: X-Mailman-Version:Precedence:List-Id:List-Unsubscribe:List-Archive: List-Post:List-Help:List-Subscribe:Errors-To; bh=h3/IgD1rI0VBx6NoIz8GtZypwmKWHoP4Mf2QCOkbbsI=; b=d5FdE/TFIhs8n8xB6DYdRzn4NFg7zQ1jtKIVDzVdrw0Qk3lE/c1ebZ3D+hQjk4t7z5TY 3NyH42XdR4Ia0p6zo+pNXX4+Mq1wOutq/afCsX6USfDg8NgSsXPqpSA2ysAHkvhUMsp6H IzwYDzbKgWTllhq1R6r8lALSP1tbClWojkb5uqBz7chV027IE1ib3gGWoVNcYmVln//lf uki927KQvsmMl3VwpKv1K1xDgt32ApXyZ/SiPLaSgeVr05jZPuU6618MFJEBWiwhlje1z hTGfBlXXblEhZHxQ44RC898rgfnIZSJfx8nyg3D22FuJ3gwqnEMpivPi84RP8ziAvLQ== ARC-Authentication-Results: i=2; smtp1.osuosl.org; arc=pass header.oldest-pass=0 smtp.remote-ip=140.211.166.142 X-Comment: SPF check N/A for local connections - client-ip=140.211.166.142; helo=lists1.osuosl.org; envelope-from=u-boot-bounces@lists.u-boot-project.org; receiver= DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=lists.u-boot-project.org; s=default; t=1791575691; bh=h3/IgD1rI0VBx6NoIz8GtZypwmKWHoP4Mf2QCOkbbsI=; h=From:To:Cc:Subject:Date:In-Reply-To:References:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=o0PUxI45/YZcpFFidWEg2UWPGRPlJm4BB+c0z8JhdDMhgdBJ66jAGaI7Fhc8FsYVr s7TFaKqoF/Su6XkBA+uzYZ22Sx7eKFjJEPe/Ib60IoEh1zAExvUOOqHYkgsK97hIUy Paw8swRRcwfP0CiNGDd16Z22YXeWBvKWMQRTgY/hit/fn/QEVv8N76g8iiXWajWFZy sRLfEYuEv0AONXi1UNf3V0ITq4NkFxAX1KxGLc21CupRDi0GufVaDqETYvY4rVPwHd skiYrLxIt375lrrN/5oVEXV3bCoLzSqEp9+JScCu9HKcTPuF7jap/fkH7/WLRxG8+L UZWdg7VGtUxNA== Received: from lists1.osuosl.org (lists1.osuosl.org [140.211.166.142]) by smtp1.osuosl.org (Postfix) with ESMTP id F09E581539; Fri, 9 Oct 2026 19:54:50 +0000 (UTC) Received: from smtp2.osuosl.org (smtp2.osuosl.org [IPv6:2605:bc80:3010::133]) by lists1.osuosl.org (Postfix) with UTF8SMTP id 80E7F356 for ; Fri, 9 Oct 2026 19:40:20 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by smtp2.osuosl.org (Postfix) with UTF8SMTP id 7E6DB40053 for ; Fri, 9 Oct 2026 19:40:20 +0000 (UTC) X-Virus-Scanned: amavis at osuosl.org Received: from smtp2.osuosl.org ([127.0.0.1]) by localhost (smtp2.osuosl.org [127.0.0.1]) (amavis, port 10024) with UTF8SMTP id cdvRKqAcIy4A for ; Fri, 9 Oct 2026 19:40:18 +0000 (UTC) ARC-Filter: OpenARC Filter v1.3.2 smtp2.osuosl.org 2D16140080 Authentication-Results: smtp2.osuosl.org; arc=none smtp.remote-ip=5.75.144.95 ARC-Seal: i=1; d=osuosl.org; s=arc; a=rsa-sha256; cv=none; t=1791574818; b=EgxFWVCfUDMdTm1pBRbYfRQYIZboMF2ACAIPwXb44Dwb5GpGK/iKbBsdhrCArUza7UAa IkKDM7qHgHLs21cpL4gy05+e8J7HGEpMbv405UpHKERwkyVUsc/BvYjBn5tJT63i9MlQ1 JsZ7bYr54EzWivrmKNNM7coUMmDUwcQxQFRnLtYsdHlQIUfZ2JpsUtRwg36Zb8Atrxa1a +1hX2NOEg9QxH6yoOLy3ttLRL8znqEeFqbYr6BS5GE3tY0dEGF2QIOzueyjY1oUyfQDic Ap4+BsAjCuFRsa4VyUoFxLkfbJLUb/aXNdrkFKWYYrH/rn1y2CFfm0OepIHUPW2lxrQ== ARC-Message-Signature: i=1; d=osuosl.org; s=arc; a=rsa-sha256; c=relaxed/relaxed; t=1791574818; h=Received-SPF:DKIM-Signature:DKIM-Signature:From:To:Cc:Subject:Date: Message-ID:X-Mailer:In-Reply-To:References:MIME-Version:Content-Type: Content-Transfer-Encoding; bh=h3/IgD1rI0VBx6NoIz8GtZypwmKWHoP4Mf2QCOkbbsI=; b=QOeJC+IkqIwxBGSnrXWde7fxShwb+aUB9ObOiwojoQuE8C3nfHai04r08RZUc3aGumHW g6u7WsI6q0u5NMQoWwYjiWnxROW8m5xlC6skOk2Lww7UjZyNj21qCakp+mFuzqBjWjf1z LuVzkU61UmYWf6tEJjUn2gZ+GOVF0nTZmdCZurA9KRZO1Fa1qbx2OuvGK2WgzL0VtQaGG JhTGmsvIXgfYum4+j1YZ6lM9t9uUxhva3MG0i3tchRkVYdj59s+nctruHzxOBmBzl6+NE LaBUypWSJ8X1Sf1XuwSr3OfdnSo+gLsGyw1mpvYeB+WQ0oLx8KTt+exX2MqZt83XeRQ== ARC-Authentication-Results: i=1; smtp2.osuosl.org; dmarc=pass header.from=mainlining.org; dkim=pass header.d=mainlining.org header.i=@mainlining.org header.a=rsa-sha256 header.s=202507r header.b=bvEcuY77; dkim=pass header.d=mainlining.org header.i=@mainlining.org header.a=ed25519-sha256 header.s=202507e header.b=4FZgZ87g; arc=none smtp.remote-ip=5.75.144.95 Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=5.75.144.95; helo=mail.mainlining.org; envelope-from=brads@mainlining.org; receiver= Authentication-Results: smtp2.osuosl.org; dmarc=pass (p=reject dis=none) header.from=mainlining.org Authentication-Results: smtp2.osuosl.org; dkim=pass (2048-bit key) header.d=mainlining.org header.i=@mainlining.org header.a=rsa-sha256 header.s=202507r header.b=bvEcuY77; dkim=pass header.d=mainlining.org header.i=@mainlining.org header.a=ed25519-sha256 header.s=202507e header.b=4FZgZ87g Received: from mail.mainlining.org (mail.mainlining.org [5.75.144.95]) by smtp2.osuosl.org (Postfix) with UTF8SMTPS id 2D16140080 for ; Fri, 9 Oct 2026 19:40:16 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; s=202507r; d=mainlining.org; c=relaxed/relaxed; h=Message-ID:Date:Subject:To:From; t=1791574627; bh=h3/IgD1rI0VBx6NoIz8GtZy pwmKWHoP4Mf2QCOkbbsI=; b=bvEcuY77S3sBVwbBX9OIiTl+hcsa6vbeTugaX9wwn4+gzlvj0j 69MxahUASDcRSSoFNLCpsTE9KnlGTX5IFEFYhXJEj5dF3T/RsCPy3yhB5SO74T319gZSxB2lMW7 /vkOBhDniM8PIKSWpCd1huuSecaoGYvClE9Uv9lmoffDxDLxHQg939NHHid1Qjt2rPe1OOQyCzs KpDWBBu05PtInw6GYPTimsQLCtPnbyfyk7lFLcGpfkqZwK1XvHEq2lS3tmAlTeJ7tZ3g7njOFJc PuYcepN7NLWy0XUIrVFYb2qT8ueBkHMZPYT8+qDHJxE3lGbfza/myEjHb5Tc3AmH7Lg==; DKIM-Signature: v=1; a=ed25519-sha256; s=202507e; d=mainlining.org; c=relaxed/relaxed; h=Message-ID:Date:Subject:To:From; t=1791574627; bh=h3/IgD1rI0VBx6NoIz8GtZy pwmKWHoP4Mf2QCOkbbsI=; b=4FZgZ87gp0knqZVf4Kc0TkwuLq0ENoDX6WXvgaLjXT1PoNCw/a B5lhLrOZUUOfDVnufmKyDsD8eBZN5HQGkpDA==; From: Bradley Morgan To: Tom Rini , u-boot@lists.u-boot-project.org Cc: Bradley Morgan , =?UTF-8?q?Marek=20Beh=C3=BAn?= , =?UTF-8?q?Marek=20Moj=C3=ADk?= , "NXP i . MX U-Boot Team" , Alexey Charkov , Anshul Dalal , Daniel Golle , Fabio Estevam , Gaurav Jain , Ilias Apalodimas , Jaehoon Chung , James Hilliard , Jerome Forissier , Johan Jonker , Lukasz Majewski , Marek Vasut , Mario Six , Michael Walle , Michal Simek , Neil Armstrong , Peng Fan , Pengpeng Hou , Priyanka Jain , Quentin Schulz , Simon Glass , Stefano Babic , Tanmay Kathpalia , Torsten Rupp , Vincent Jardin , Weijie Gao Subject: [PATCH 07/26] board: powerpc: Remove T1042D4RDB support Date: Fri, 9 Oct 2026 19:36:45 +0000 Message-ID: <20261009193704.13061-8-brads@mainlining.org> X-Mailer: git-send-email 2.47.3 In-Reply-To: <20261009193704.13061-1-brads@mainlining.org> References: <20261009193704.13061-1-brads@mainlining.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-Mailman-Approved-At: Fri, 09 Oct 2026 19:54:04 +0000 X-BeenThere: u-boot@lists.u-boot-project.org X-Mailman-Version: 2.1.30 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.u-boot-project.org The T1042D4RDB-PA is obsolete and no longer manufactured. Remove the target and its board support. Signed-off-by: Bradley Morgan --- arch/powerpc/cpu/mpc85xx/Kconfig | 10 - arch/powerpc/dts/Makefile | 1 - arch/powerpc/dts/t1042d4rdb-u-boot.dtsi | 12 - arch/powerpc/dts/t1042d4rdb.dts | 89 ----- arch/powerpc/dts/t104x.dtsi | 148 -------- arch/powerpc/include/asm/fsl_secure_boot.h | 1 - board/nxp/t104xrdb/Kconfig | 12 - board/nxp/t104xrdb/MAINTAINERS | 13 - board/nxp/t104xrdb/Makefile | 13 - board/nxp/t104xrdb/README | 386 -------------------- board/nxp/t104xrdb/cpld.c | 116 ------ board/nxp/t104xrdb/cpld.h | 45 --- board/nxp/t104xrdb/ddr.c | 148 -------- board/nxp/t104xrdb/ddr.h | 56 --- board/nxp/t104xrdb/law.c | 31 -- board/nxp/t104xrdb/spl.c | 131 ------- board/nxp/t104xrdb/t1040_nand_rcw.cfg | 7 - board/nxp/t104xrdb/t1040_sd_rcw.cfg | 7 - board/nxp/t104xrdb/t1040_spi_rcw.cfg | 7 - board/nxp/t104xrdb/t1040d4_nand_rcw.cfg | 7 - board/nxp/t104xrdb/t1040d4_sd_rcw.cfg | 7 - board/nxp/t104xrdb/t1040d4_spi_rcw.cfg | 7 - board/nxp/t104xrdb/t1042_nand_rcw.cfg | 7 - board/nxp/t104xrdb/t1042_pi_nand_rcw.cfg | 7 - board/nxp/t104xrdb/t1042_pi_sd_rcw.cfg | 7 - board/nxp/t104xrdb/t1042_pi_spi_rcw.cfg | 7 - board/nxp/t104xrdb/t1042_sd_rcw.cfg | 7 - board/nxp/t104xrdb/t1042_spi_rcw.cfg | 7 - board/nxp/t104xrdb/t1042d4_nand_rcw.cfg | 7 - board/nxp/t104xrdb/t1042d4_sd_rcw.cfg | 7 - board/nxp/t104xrdb/t1042d4_spi_rcw.cfg | 7 - board/nxp/t104xrdb/t104x_pbi.cfg | 36 -- board/nxp/t104xrdb/t104x_pbi_sb.cfg | 38 -- board/nxp/t104xrdb/t104xrdb.c | 159 --------- board/nxp/t104xrdb/t104xrdb.h | 11 - board/nxp/t104xrdb/tlb.c | 132 ------- configs/T1042D4RDB_NAND_defconfig | 144 -------- configs/T1042D4RDB_SDCARD_defconfig | 138 ------- configs/T1042D4RDB_SPIFLASH_defconfig | 141 -------- configs/T1042D4RDB_defconfig | 114 ------ include/configs/T104xRDB.h | 397 --------------------- 41 files changed, 2627 deletions(-) delete mode 100644 arch/powerpc/dts/t1042d4rdb-u-boot.dtsi delete mode 100644 arch/powerpc/dts/t1042d4rdb.dts delete mode 100644 arch/powerpc/dts/t104x.dtsi delete mode 100644 board/nxp/t104xrdb/Kconfig delete mode 100644 board/nxp/t104xrdb/MAINTAINERS delete mode 100644 board/nxp/t104xrdb/Makefile delete mode 100644 board/nxp/t104xrdb/README delete mode 100644 board/nxp/t104xrdb/cpld.c delete mode 100644 board/nxp/t104xrdb/cpld.h delete mode 100644 board/nxp/t104xrdb/ddr.c delete mode 100644 board/nxp/t104xrdb/ddr.h delete mode 100644 board/nxp/t104xrdb/law.c delete mode 100644 board/nxp/t104xrdb/spl.c delete mode 100644 board/nxp/t104xrdb/t1040_nand_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1040_sd_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1040_spi_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1040d4_nand_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1040d4_sd_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1040d4_spi_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1042_nand_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1042_pi_nand_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1042_pi_sd_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1042_pi_spi_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1042_sd_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1042_spi_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1042d4_nand_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1042d4_sd_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t1042d4_spi_rcw.cfg delete mode 100644 board/nxp/t104xrdb/t104x_pbi.cfg delete mode 100644 board/nxp/t104xrdb/t104x_pbi_sb.cfg delete mode 100644 board/nxp/t104xrdb/t104xrdb.c delete mode 100644 board/nxp/t104xrdb/t104xrdb.h delete mode 100644 board/nxp/t104xrdb/tlb.c delete mode 100644 configs/T1042D4RDB_NAND_defconfig delete mode 100644 configs/T1042D4RDB_SDCARD_defconfig delete mode 100644 configs/T1042D4RDB_SPIFLASH_defconfig delete mode 100644 configs/T1042D4RDB_defconfig delete mode 100644 include/configs/T104xRDB.h diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 8a37191bea0..7fee93862c7 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -167,15 +167,6 @@ config TARGET_T1024RDB imply CMD_EEPROM imply PANIC_HANG -config TARGET_T1042D4RDB - bool "Support T1042D4RDB" - select ARCH_T1042 - select BOARD_LATE_INIT if CHAIN_OF_TRUST - select SUPPORT_SPL - select PHYS_64BIT - select SYS_L3_SIZE_256KB - imply PANIC_HANG - config TARGET_T2080QDS bool "Support T2080QDS" select ARCH_T2080 @@ -1473,7 +1464,6 @@ source "board/nxp/p1010rdb/Kconfig" source "board/nxp/p1_p2_rdb_pc/Kconfig" source "board/nxp/p2041rdb/Kconfig" source "board/nxp/t102xrdb/Kconfig" -source "board/nxp/t104xrdb/Kconfig" source "board/nxp/t208xqds/Kconfig" source "board/nxp/t208xrdb/Kconfig" source "board/nxp/t4rdb/Kconfig" diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile index 3f5473b80af..4bc6e9085f4 100644 --- a/arch/powerpc/dts/Makefile +++ b/arch/powerpc/dts/Makefile @@ -13,7 +13,6 @@ dtb-$(CONFIG_TARGET_P1020RDB_PC) += p1020rdb-pc.dtb p1020rdb-pc_36b.dtb dtb-$(CONFIG_TARGET_P1020RDB_PD) += p1020rdb-pd.dtb dtb-$(CONFIG_TARGET_SOCRATES) += socrates.dtb dtb-$(CONFIG_TARGET_T1024RDB) += t1024rdb.dtb -dtb-$(CONFIG_TARGET_T1042D4RDB) += t1042d4rdb.dtb dtb-$(CONFIG_TARGET_T2080QDS) += t2080qds.dtb dtb-$(CONFIG_TARGET_T2080RDB) += t2080rdb.dtb dtb-$(CONFIG_TARGET_T4240RDB) += t4240rdb.dtb diff --git a/arch/powerpc/dts/t1042d4rdb-u-boot.dtsi b/arch/powerpc/dts/t1042d4rdb-u-boot.dtsi deleted file mode 100644 index b50b922aeb2..00000000000 --- a/arch/powerpc/dts/t1042d4rdb-u-boot.dtsi +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* Copyright 2023 NXP */ - -&serial0 { - bootph-all; -}; - -&serial1 { - bootph-all; -}; - -#include "u-boot.dtsi" diff --git a/arch/powerpc/dts/t1042d4rdb.dts b/arch/powerpc/dts/t1042d4rdb.dts deleted file mode 100644 index 0230d3ba675..00000000000 --- a/arch/powerpc/dts/t1042d4rdb.dts +++ /dev/null @@ -1,89 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * T1042D4RDB Device Tree Source - * - * Copyright 2013 - 2015 Freescale Semiconductor Inc. - * Copyright 2019-2023 NXP - */ - -/include/ "t104x.dtsi" - -/ { - model = "fsl,T1042D4RDB"; - compatible = "fsl,T1042D4RDB"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - spi0 = &espi0; - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - }; -}; - -&soc { - fman0: fman@400000 { - ethernet@e0000 { - phy-handle = <&phy_sgmii_0>; - phy-connection-type = "sgmii"; - }; - - ethernet@e2000 { - phy-handle = <&phy_sgmii_1>; - phy-connection-type = "sgmii"; - }; - - ethernet@e4000 { - phy-handle = <&phy_sgmii_2>; - phy-connection-type = "sgmii"; - }; - - ethernet@e6000 { - phy-handle = <&phy_rgmii_0>; - phy-connection-type = "rgmii"; - }; - - ethernet@e8000 { - phy-handle = <&phy_rgmii_1>; - phy-connection-type = "rgmii"; - }; - - mdio0: mdio@fc000 { - phy_sgmii_0: ethernet-phy@2 { - reg = <0x02>; - }; - - phy_sgmii_1: ethernet-phy@3 { - reg = <0x03>; - }; - - phy_sgmii_2: ethernet-phy@1 { - reg = <0x01>; - }; - - phy_rgmii_0: ethernet-phy@4 { - reg = <0x04>; - }; - - phy_rgmii_1: ethernet-phy@5 { - reg = <0x05>; - }; - }; - }; -}; - -&espi0 { - status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <10000000>; /* input clock */ - }; -}; - -/include/ "t1042si-post.dtsi" diff --git a/arch/powerpc/dts/t104x.dtsi b/arch/powerpc/dts/t104x.dtsi deleted file mode 100644 index 2c7e5b47185..00000000000 --- a/arch/powerpc/dts/t104x.dtsi +++ /dev/null @@ -1,148 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * T104X Silicon/SoC Device Tree Source (pre include) - * - * Copyright 2013 Freescale Semiconductor Inc. - * Copyright 2019-2020 NXP - */ - -/dts-v1/; - -/include/ "e5500_power_isa.dtsi" - -/ { - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,e5500@0 { - device_type = "cpu"; - reg = <0>; - #cooling-cells = <2>; - }; - cpu1: PowerPC,e5500@1 { - device_type = "cpu"; - reg = <1>; - #cooling-cells = <2>; - }; - cpu2: PowerPC,e5500@2 { - device_type = "cpu"; - reg = <2>; - #cooling-cells = <2>; - }; - cpu3: PowerPC,e5500@3 { - device_type = "cpu"; - reg = <3>; - #cooling-cells = <2>; - }; - }; - - soc: soc@ffe000000 { - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - clock-frequency = <0x0>; - }; - - espi0: spi@110000 { - compatible = "fsl,mpc8536-espi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x110000 0x1000>; - fsl,espi-num-chipselects = <4>; - status = "disabled"; - }; - - usb0@210000 { - compatible = "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - phy_type = "utmi"; - }; - - usb1@211000 { - compatible = "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - phy_type = "utmi"; - }; - - sata: sata@220000 { - compatible = "fsl,pq-sata-v2"; - reg = <0x220000 0x1000>; - interrupts = <68 0x2 0 0>; - sata-offset = <0x1000>; - sata-number = <2>; - sata-fpdma = <0>; - }; - - esdhc: esdhc@114000 { - compatible = "fsl,esdhc"; - reg = <0x114000 0x1000>; - clock-frequency = <0>; - }; - /include/ "qoriq-i2c-0.dtsi" - /include/ "qoriq-i2c-1.dtsi" - }; - - pcie@ffe240000 { - compatible = "fsl,pcie-t104x", "fsl,pcie-fsl-qoriq"; - reg = <0xf 0xfe240000 0x0 0x1000>; /* registers */ - law_trgt_if = <0>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - bus-range = <0x0 0xff>; - ranges = <0x01000000 0x0 0x00000000 0xf 0xf8000000 0x0 0x00010000 /* downstream I/O */ - 0x02000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000>; /* non-prefetchable memory */ - }; - - pcie@ffe250000 { - compatible = "fsl,pcie-t104x", "fsl,pcie-fsl-qoriq"; - reg = <0xf 0xfe250000 0x0 0x1000>; /* registers */ - law_trgt_if = <1>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - bus-range = <0x0 0xff>; - ranges = <0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000 /* downstream I/O */ - 0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000>; /* non-prefetchable memory */ - }; - - pcie@ffe260000 { - compatible = "fsl,pcie-t104x", "fsl,pcie-fsl-qoriq"; - reg = <0xf 0xfe260000 0x0 0x1000>; /* registers */ - law_trgt_if = <2>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - bus-range = <0x0 0xff>; - ranges = <0x01000000 0x0 0x00000000 0xf 0xf8020000 0x0 0x00010000 /* downstream I/O */ - 0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000>; /* non-prefetchable memory */ - }; - - pcie@ffe270000 { - compatible = "fsl,pcie-t104x", "fsl,pcie-fsl-qoriq"; - reg = <0xf 0xfe270000 0x0 0x1000>; /* registers */ - law_trgt_if = <3>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - bus-range = <0x0 0xff>; - ranges = <0x01000000 0x0 0x00000000 0xf 0xf8030000 0x0 0x00010000 /* downstream I/O */ - 0x02000000 0x0 0xe0000000 0xc 0x30000000 0x0 0x10000000>; /* non-prefetchable memory */ - }; -}; diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index f12830984c6..10f8b0fcd09 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -17,7 +17,6 @@ #if defined(CONFIG_TARGET_T2080QDS) || \ defined(CONFIG_TARGET_T2080RDB) || \ - defined(CONFIG_TARGET_T1042D4RDB) || \ defined(CONFIG_ARCH_T1024) #undef CFG_SYS_INIT_L3_ADDR #define CFG_SYS_INIT_L3_ADDR 0xbff00000 diff --git a/board/nxp/t104xrdb/Kconfig b/board/nxp/t104xrdb/Kconfig deleted file mode 100644 index fb26b7c9256..00000000000 --- a/board/nxp/t104xrdb/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_T1042D4RDB - -config SYS_BOARD - default "t104xrdb" - -config SYS_VENDOR - default "nxp" - -config SYS_CONFIG_NAME - default "T104xRDB" - -endif diff --git a/board/nxp/t104xrdb/MAINTAINERS b/board/nxp/t104xrdb/MAINTAINERS deleted file mode 100644 index d0b5709df81..00000000000 --- a/board/nxp/t104xrdb/MAINTAINERS +++ /dev/null @@ -1,13 +0,0 @@ -T104XRDB BOARD -M: Priyanka Jain -S: Maintained -F: board/nxp/t104xrdb/ -F: include/configs/T104xRDB.h -F: configs/T1042D4RDB_defconfig -F: configs/T1042D4RDB_NAND_defconfig -F: configs/T1042D4RDB_SPIFLASH_defconfig - -T1040RDB_SDCARD BOARD -M: Priyanka Jain -S: Maintained -F: configs/T1042D4RDB_SDCARD_defconfig diff --git a/board/nxp/t104xrdb/Makefile b/board/nxp/t104xrdb/Makefile deleted file mode 100644 index cee574aabb9..00000000000 --- a/board/nxp/t104xrdb/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2013 Freescale Semiconductor, Inc. - -ifdef CONFIG_XPL_BUILD -obj-y += spl.o -else -obj-y += t104xrdb.o -obj-y += cpld.o -endif -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/nxp/t104xrdb/README b/board/nxp/t104xrdb/README deleted file mode 100644 index b852f72998d..00000000000 --- a/board/nxp/t104xrdb/README +++ /dev/null @@ -1,386 +0,0 @@ -Overview --------- -The T1040RDB is a Freescale reference board that hosts the T1040 SoC -(and variants). Variants inclued T1042 presonality of T1040, in which -case T1040RDB can also be called T1042RDB. - -The T1042RDB is a Freescale reference board that hosts the T1042 SoC -(and variants). The board is similar to T1040RDB, T1040 is a reduced -personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch). - -The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC. -(a personality of T1040 SoC). The board is similar to T1040RDB but is -designed specially with low power features targeted for Printing Image Market. - -The T1040D4RDB is a Freescale reference board that hosts the T1040 SoC. -The board is re-designed T1040RDB board with following changes : - - Support of DDR4 memory and some enhancements - -The T1042D4RDB is a Freescale reference board that hosts the T1042 SoC. -The board is re-designed T1040RDB board with following changes : - - Support of DDR4 memory - - Support for 0x86 serdes protocol which can support following interfaces - - 2 RGMII's on DTSEC4, DTSEC5 - - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3 - -Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB -------------------------------------------------------------------------- -Board Si Protocol Targeted Market -------------------------------------------------------------------------- -T1040RDB T1040 0x66 Networking -T1040RDB T1042 0x86 Networking -T1042RDB_PI T1042 0x06 Printing & Imaging -T1040D4RDB T1040 0x66 Networking -T1042D4RDB T1042 0x86 Networking - - -T1040 SoC Overview ------------------- -The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA -processor cores with high-performance data path acceleration architecture -and network peripheral interfaces required for networking & telecommunications. - -The T1040/T1042 SoC includes the following function and features: - - - Four e5500 cores, each with a private 256 KB L2 cache - - 256 KB shared L3 CoreNet platform cache (CPC) - - Interconnect CoreNet platform - - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving - support - - Data Path Acceleration Architecture (DPAA) incorporating acceleration - for the following functions: - - Packet parsing, classification, and distribution - - Queue management for scheduling, packet sequencing, and congestion - management - - Cryptography Acceleration (SEC 5.0) - - RegEx Pattern Matching Acceleration (PME 2.2) - - IEEE Std 1588 support - - Hardware buffer management for buffer allocation and deallocation - - Ethernet interfaces - - Integrated 8-port Gigabit Ethernet switch (T1040 only) - - Four 1 Gbps Ethernet controllers - - Two RGMII interfaces or one RGMII and one MII interfaces - - High speed peripheral interfaces - - Four PCI Express 2.0 controllers running at up to 5 GHz - - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation - - Upto two QSGMII interface - - Upto six SGMII interface supporting 1000 Mbps - - One SGMII interface supporting upto 2500 Mbps - - Additional peripheral interfaces - - Two USB 2.0 controllers with integrated PHY - - SD/eSDHC/eMMC - - eSPI controller - - Four I2C controllers - - Four UARTs - - Four GPIO controllers - - Integrated flash controller (IFC) - - LCD and HDMI interface (DIU) with 12 bit dual data rate - - TDM interface - - Multicore programmable interrupt controller (PIC) - - Two 8-channel DMA engines - - Single source clocking implementation - - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) - -T1040 SoC Personalities -------------------------- -T1022 Personality: -T1022 is a reduced personality of T1040 with less core/clusters. - -T1042 Personality: -T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit -Ethernet switch. Rest of the blocks are same as T1040 - - -T1040RDB board Overview -------------------------- - - SERDES Connections, 8 lanes information: - 1: None - 2: SGMII - 3: QSGMII - 4: QSGMII - 5: PCIe1 x1 slot - 6: mini PCIe connector - 7: mini PCIe connector - 8: SATA connector - - DDR Controller - - Supports rates of up to 1600 MHz data-rate - - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types. - - IFC/Local Bus - - NAND flash: 1GB 8-bit NAND flash - - NOR: 128MB 16-bit NOR Flash - - Ethernet - - Two on-board RGMII 10/100/1G ethernet ports. - - CPLD - - Clocks - - System and DDR clock (SYSCLK, “DDRCLK”) - - SERDES clocks - - Power Supplies - - USB - - Supports two USB 2.0 ports with integrated PHYs - - Two type A ports with 5V@1.5A per port. - - SDHC - - SDHC/SDXC connector - - SPI - - On-board 64MB SPI flash - - Other IO - - Two Serial ports - - Four I2C ports - -T1042RDB_PI board Overview -------------------------- - - SERDES Connections, 8 lanes information: - 1, 2, 3, 4 : PCIe x4 slot - 5: mini PCIe connector - 6: mini PCIe connector - 7: NA - 8: SATA connector - - DDR Controller - - Supports rates of up to 1600 MHz data-rate - - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types. - - IFC/Local Bus - - NAND flash: 1GB 8-bit NAND flash - - NOR: 128MB 16-bit NOR Flash - - Ethernet - - Two on-board RGMII 10/100/1G ethernet ports. - - CPLD - - Clocks - - System and DDR clock (SYSCLK, “DDRCLK”) - - SERDES clocks - - Video - - DIU supports video at up to 1280x1024x32bpp - - Power Supplies - - USB - - Supports two USB 2.0 ports with integrated PHYs - - Two type A ports with 5V@1.5A per port. - - SDHC - - SDHC/SDXC connector - - SPI - - On-board 64MB SPI flash - - Other IO - - Two Serial ports - - Four I2C ports - -Memory map ------------ -The addresses in brackets are physical addresses. - -Start Address End Address Description Size -0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB -0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB -0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB -0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB -0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB -0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB -0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB -0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB -0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB -0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB -0xF_0000_0000 0xF_003F_FFFF DCSR 4MB -0xC_3000_0000 0xC_3FFF_FFFF PCI Express 4 Mem Space 256MB -0xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB -0xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB -0xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB -0x0_0000_0000 0x0_ffff_ffff DDR 2GB - - -NOR Flash memory Map ---------------------- - Start End Definition Size -0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB -0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB -0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB -0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB -0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB -0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB -0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB -0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB -0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB -0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB -0xE8000000 0xE801FFFF RCW (current bank) 128KB - - -Various Software configurations/environment variables/commands --------------------------------------------------------------- -The below commands apply to the board - -1. U-Boot environment variable hwconfig - The default hwconfig is: - hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: - dr_mode=host,phy_type=utmi - Note: For USB gadget set "dr_mode=peripheral" - -2. FMAN Ucode versions - fsl_fman_ucode_t1040.bin - -3. Switching to alternate bank - Commands for switching to alternate bank. - - 1. To change from vbank0 to vbank4 - => cpld reset altbank (it will boot using vbank4) - - 2.To change from vbank4 to vbank0 - => cpld reset (it will boot using vbank0) - -NAND boot with 2 Stage boot loader ----------------------------------- -PBL initialise the internal SRAM and copy SPL(160KB) in SRAM. -SPL further initialise DDR using SPD and environment variables and copy -U-Boot(768 KB) from flash to DDR. -Finally SPL transer control to U-Boot for futher booting. - -SPL has following features: - - Executes within 256K - - No relocation required - - Run time view of SPL framework during boot :- - ----------------------------------------------- - Area | Address | ------------------------------------------------ - Secure boot | 0xFFFC0000 (32KB) | - headers | | - ----------------------------------------------- - GD, BD | 0xFFFC8000 (4KB) | - ----------------------------------------------- - ENV | 0xFFFC9000 (8KB) | - ----------------------------------------------- - HEAP | 0xFFFCB000 (30KB) | - ----------------------------------------------- - STACK | 0xFFFD8000 (22KB) | - ----------------------------------------------- - U-Boot SPL | 0xFFFD8000 (160KB) | - ----------------------------------------------- - -NAND Flash memory Map on T104xRDB ------------------------------------------- - Start End Definition Size -0x000000 0x0FFFFF U-Boot 1MB -0x180000 0x19FFFF U-Boot env 128KB -0x280000 0x29FFFF FMAN Ucode 128KB -0x380000 0x39FFFF QE Firmware 128KB - -SD Card memory Map on T104xRDB ------------------------------------------- - Block #blocks Definition Size -0x008 2048 U-Boot 1MB -0x800 0024 U-Boot env 8KB -0x820 0256 FMAN Ucode 128KB -0x920 0256 QE Firmware 128KB - -SPI Flash memory Map on T104xRDB ------------------------------------------- - Start End Definition Size -0x000000 0x0FFFFF U-Boot 1MB -0x100000 0x101FFF U-Boot env 8KB -0x110000 0x12FFFF FMAN Ucode 128KB -0x130000 0x14FFFF QE Firmware 128KB - -Please note QE Firmware is only valid for T1040RDB - - -Switch Settings for T104xRDB boards: (ON is 0, OFF is 1) -========================================================== -NOR boot SW setting: -SW1: 00010011 -SW2: 10111011 -SW3: 11100001 - -NAND boot SW setting: -SW1: 10001000 -SW2: 00111011 -SW3: 11110001 - -SPI boot SW setting: -SW1: 00100010 -SW2: 10111011 -SW3: 11100001 - -SD boot SW setting: -SW1: 00100000 -SW2: 00111011 -SW3: 11100001 - -Switch Settings for T104xD4RDB boards: (ON is 0, OFF is 1) -============================================================= -NOR boot SW setting: -SW1: 00010011 -SW2: 10111001 -SW3: 11100001 - -NAND boot SW setting: -SW1: 10001000 -SW2: 00111001 -SW3: 11110001 - -SPI boot SW setting: -SW1: 00100010 -SW2: 10111001 -SW3: 11100001 - -SD boot SW setting: -SW1: 00100000 -SW2: 00111001 -SW3: 11100001 - -PBL-based image generation -========================== -Changes only the required register bit in in PBI commands. - -Provides reference code which might needs some -modification as per requirement. -example: -By default PBI_SRC=14 (which is for IFC-NAND/NOR) in rcw.cfg file -which needs to be changed for SPI and SD. - -For SD-boot -============== -1. Set RCW[192:195], PBI_SRC bits as 6 in RCW file (t1040d4_rcw.cfg type files) - -example: - RCW file: board/nxp/t104xrdb/t1040d4_rcw.cfg - -Change -66000002 40000002 ec027000 01000000 -to -66000002 40000002 6c027000 01000000 - -2. SD does not support flush so remove flush from pbl, make changes in - tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000 - with 0x091380c0 - -For SPI-boot -============== -1. Set RCW[192:195], PBI_SRC bits as 5 in RCW file (t1040d4_rcw.cfg type files) - -example: - RCW file: board/nxp/t104xrdb/t1040d4_rcw.cfg - -Change -66000002 40000002 ec027000 01000000 -to -66000002 40000002 5c027000 01000000 - -2. SPI does not support flush so remove flush from pbl, make changes in - tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000 - with 0x091380c0 - -Device tree support and how to enable it for different configs --------------------------------------------------------------- -Device tree support is available for t1042d4rdb for below mentioned boot, -1. NOR Boot -2. NAND Boot -3. SD Boot -4. SPIFLASH Boot - -To enable device tree support for other boot, below configs need to be -enabled in relative defconfig file, -1. CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb" (Change default device tree name if required) -2. CONFIG_OF_CONTROL -3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at - CFG_RESET_VECTOR_ADDRESS - 0xffc - -If device tree support is enabled in defconfig, -1. use 'u-boot.bin' for NOR boot. -2. use 'u-boot-with-spl-pbl.bin' for other boot. diff --git a/board/nxp/t104xrdb/cpld.c b/board/nxp/t104xrdb/cpld.c deleted file mode 100644 index 038e40e2fae..00000000000 --- a/board/nxp/t104xrdb/cpld.c +++ /dev/null @@ -1,116 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/** - * Copyright 2014 Freescale Semiconductor - * - * This file provides support for the board-specific CPLD used on some Freescale - * reference boards. - * - * The following macros need to be defined: - * - * CFG_SYS_CPLD_BASE-The virtual address of the base of the CPLD register map - */ - -#include -#include -#include -#include - -#include "cpld.h" - -u8 cpld_read(unsigned int reg) -{ - void *p = (void *)CFG_SYS_CPLD_BASE; - - return in_8(p + reg); -} - -void cpld_write(unsigned int reg, u8 value) -{ - void *p = (void *)CFG_SYS_CPLD_BASE; - - out_8(p + reg, value); -} - -/** - * Set the boot bank to the alternate bank - */ -void cpld_set_altbank(void) -{ - u8 reg = CPLD_READ(flash_ctl_status); - - reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_ALTBANK; - - CPLD_WRITE(flash_ctl_status, reg); - CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET); -} - -/** - * Set the boot bank to the default bank - */ -void cpld_set_defbank(void) -{ - u8 reg = CPLD_READ(flash_ctl_status); - - reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_DFLTBANK; - - CPLD_WRITE(flash_ctl_status, reg); - CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET); -} - -#ifdef DEBUG -static void cpld_dump_regs(void) -{ - printf("cpld_ver = 0x%02x\n", CPLD_READ(cpld_ver)); - printf("cpld_ver_sub = 0x%02x\n", CPLD_READ(cpld_ver_sub)); - printf("hw_ver = 0x%02x\n", CPLD_READ(hw_ver)); - printf("sw_ver = 0x%02x\n", CPLD_READ(sw_ver)); - printf("reset_ctl1 = 0x%02x\n", CPLD_READ(reset_ctl1)); - printf("reset_ctl2 = 0x%02x\n", CPLD_READ(reset_ctl2)); - printf("int_status = 0x%02x\n", CPLD_READ(int_status)); - printf("flash_ctl_status = 0x%02x\n", CPLD_READ(flash_ctl_status)); - printf("fan_ctl_status = 0x%02x\n", CPLD_READ(fan_ctl_status)); -#if defined(CONFIG_TARGET_T1040D4D4RDB) || defined(CONFIG_TARGET_T1042D4RDB) - printf("int_mask = 0x%02x\n", CPLD_READ(int_mask)); -#else - printf("led_ctl_status = 0x%02x\n", CPLD_READ(led_ctl_status)); -#endif - printf("sfp_ctl_status = 0x%02x\n", CPLD_READ(sfp_ctl_status)); - printf("misc_ctl_status = 0x%02x\n", CPLD_READ(misc_ctl_status)); - printf("boot_override = 0x%02x\n", CPLD_READ(boot_override)); - printf("boot_config1 = 0x%02x\n", CPLD_READ(boot_config1)); - printf("boot_config2 = 0x%02x\n", CPLD_READ(boot_config2)); - putc('\n'); -} -#endif - -int do_cpld(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - int rc = 0; - - if (argc <= 1) - return cmd_usage(cmdtp); - - if (strcmp(argv[1], "reset") == 0) { - if (strcmp(argv[2], "altbank") == 0) - cpld_set_altbank(); - else - cpld_set_defbank(); -#ifdef DEBUG - } else if (strcmp(argv[1], "dump") == 0) { - cpld_dump_regs(); -#endif - } else - rc = cmd_usage(cmdtp); - - return rc; -} - -U_BOOT_CMD( - cpld, CONFIG_SYS_MAXARGS, 1, do_cpld, - "Reset the board or alternate bank", - "reset - hard reset to default bank\n" - "cpld reset altbank - reset to alternate bank\n" -#ifdef DEBUG - "cpld dump - display the CPLD registers\n" -#endif - ); diff --git a/board/nxp/t104xrdb/cpld.h b/board/nxp/t104xrdb/cpld.h deleted file mode 100644 index 0384202fbcb..00000000000 --- a/board/nxp/t104xrdb/cpld.h +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/** - * Copyright 2013 Freescale Semiconductor - * - * This file provides support for the ngPIXIS, a board-specific FPGA used on - * some Freescale reference boards. - */ - -/* - * CPLD register set. Feel free to add board-specific #ifdefs where necessary. - */ -struct cpld_data { - u8 cpld_ver; /* 0x00 - CPLD Major Revision Register */ - u8 cpld_ver_sub; /* 0x01 - CPLD Minor Revision Register */ - u8 hw_ver; /* 0x02 - Hardware Revision Register */ - u8 sw_ver; /* 0x03 - Software Revision register */ - u8 res0[12]; /* 0x04 - 0x0F - not used */ - u8 reset_ctl1; /* 0x10 - Reset control Register1 */ - u8 reset_ctl2; /* 0x11 - Reset control Register2 */ - u8 int_status; /* 0x12 - Interrupt status Register */ - u8 flash_ctl_status; /* 0x13 - Flash control and status register */ - u8 fan_ctl_status; /* 0x14 - Fan control and status register */ -#if defined(CONFIG_TARGET_T1042D4RDB) - u8 int_mask; /* 0x15 - Interrupt mask Register */ -#else - u8 led_ctl_status; /* 0x15 - LED control and status register */ -#endif - u8 sfp_ctl_status; /* 0x16 - SFP control and status register */ - u8 misc_ctl_status; /* 0x17 - Miscellanies ctrl & status register*/ - u8 boot_override; /* 0x18 - Boot override register */ - u8 boot_config1; /* 0x19 - Boot config override register*/ - u8 boot_config2; /* 0x1A - Boot config override register*/ -}; - -/* Pointer to the CPLD register set */ - -u8 cpld_read(unsigned int reg); -void cpld_write(unsigned int reg, u8 value); - -#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg)) -#define CPLD_WRITE(reg, value)\ - cpld_write(offsetof(struct cpld_data, reg), value) -#define MISC_CTL_SG_SEL 0x80 -#define MISC_CTL_AURORA_SEL 0x02 -#define MISC_MUX_QE_TDM 0xc0 diff --git a/board/nxp/t104xrdb/ddr.c b/board/nxp/t104xrdb/ddr.c deleted file mode 100644 index 6c066480b46..00000000000 --- a/board/nxp/t104xrdb/ddr.c +++ /dev/null @@ -1,148 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * Copyright 2021 NXP - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "ddr.h" - -DECLARE_GLOBAL_DATA_PTR; - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; - ulong ddr_freq; - - if (ctrl_num > 1) { - printf("Not supported controller number %d\n", ctrl_num); - return; - } - if (!pdimm->n_ranks) - return; - - pbsp = udimms[0]; - - /* Get clk_adjust according to the board ddr - * freqency and n_banks specified in board_specific_parameters table. - */ - ddr_freq = get_ddr_freq(0) / 1000000; - while (pbsp->datarate_mhz_high) { - if (pbsp->n_ranks == pdimm->n_ranks && - (pdimm->rank_density >> 30) >= pbsp->rank_gb) { - if (ddr_freq <= pbsp->datarate_mhz_high) { - popts->clk_adjust = pbsp->clk_adjust; - popts->wrlvl_start = pbsp->wrlvl_start; - popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; - popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; - goto found; - } - pbsp_highest = pbsp; - } - pbsp++; - } - - if (pbsp_highest) { - printf("Error: board specific timing not found\n"); - printf("for data rate %lu MT/s\n", ddr_freq); - printf("Trying to use the highest speed (%u) parameters\n", - pbsp_highest->datarate_mhz_high); - popts->clk_adjust = pbsp_highest->clk_adjust; - popts->wrlvl_start = pbsp_highest->wrlvl_start; - popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; - popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; - } else { - panic("DIMM is not supported by this board"); - } -found: - debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n" - "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, " - "wrlvl_ctrl_3 0x%x\n", - pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, - pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, - pbsp->wrlvl_ctl_3); - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ -#ifdef CONFIG_SYS_FSL_DDR4 - popts->half_strength_driver_enable = 1; - /* optimize cpo for erratum A-009942 */ - popts->cpo_sample = 0x59; -#else - popts->cpo_sample = 0x54; - popts->half_strength_driver_enable = 0; -#endif - /* - * Write leveling override - */ - popts->wrlvl_override = 1; - popts->wrlvl_sample = 0xf; - - /* - * rtt and rtt_wr override - */ - popts->rtt_override = 0; - - /* Enable ZQ calibration */ - popts->zq_en = 1; - - /* DHC_EN =1, ODT = 75 Ohm */ -#ifdef CONFIG_SYS_FSL_DDR4 - popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_120OHM); - popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_120OHM) | - DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */ -#else - popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); - popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); -#endif -} - -#if defined(CONFIG_DEEP_SLEEP) -void board_mem_sleep_setup(void) -{ - void __iomem *cpld_base = (void *)CFG_SYS_CPLD_BASE; - - /* does not provide HW signals for power management */ - clrbits_8(cpld_base + 0x17, 0x40); - /* Disable MCKE isolation */ - gpio_set_value(2, 0); - udelay(1); -} -#endif - -int dram_init(void) -{ - phys_size_t dram_size; - -#if defined(CONFIG_XPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL) - puts("Initializing....using SPD\n"); - dram_size = fsl_ddr_sdram(); -#else - dram_size = fsl_ddr_sdram_size(); -#endif - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - -#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_XPL_BUILD) - fsl_dp_resume(); -#endif - - gd->ram_size = dram_size; - - return 0; -} diff --git a/board/nxp/t104xrdb/ddr.h b/board/nxp/t104xrdb/ddr.h deleted file mode 100644 index f9d667f6174..00000000000 --- a/board/nxp/t104xrdb/ddr.h +++ /dev/null @@ -1,56 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#ifndef __DDR_H__ -#define __DDR_H__ -struct board_specific_parameters { - u32 n_ranks; - u32 datarate_mhz_high; - u32 rank_gb; - u32 clk_adjust; - u32 wrlvl_start; - u32 wrlvl_ctl_2; - u32 wrlvl_ctl_3; -}; - -/* - * These tables contain all valid speeds we want to override with board - * specific parameters. datarate_mhz_high values need to be in ascending order - * for each n_ranks group. - */ - -static const struct board_specific_parameters udimm0[] = { - /* - * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl - * ranks| mhz| GB |adjst| start | ctl2 - */ -#ifdef CONFIG_SYS_FSL_DDR4 - {2, 1600, 4, 8, 6, 0x07090A0c, 0x0e0f100a}, - {1, 1600, 4, 8, 5, 0x0607080B, 0x0C0C0D09}, -#elif defined(CONFIG_SYS_FSL_DDR3) - {2, 833, 4, 8, 6, 0x06060607, 0x08080807}, - {2, 833, 0, 8, 6, 0x06060607, 0x08080807}, - {2, 1350, 4, 8, 7, 0x0708080A, 0x0A0B0C09}, - {2, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09}, - {2, 1666, 4, 8, 7, 0x0808090B, 0x0C0D0E0A}, - {2, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A}, - {1, 833, 4, 8, 6, 0x06060607, 0x08080807}, - {1, 833, 0, 8, 6, 0x06060607, 0x08080807}, - {1, 1350, 4, 8, 7, 0x0708080A, 0x0A0B0C09}, - {1, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09}, - {1, 1666, 4, 8, 7, 0x0808090B, 0x0C0D0E0A}, - {1, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A}, -#else -#error DDR type not defined -#endif - {} -}; - -#endif - -static const struct board_specific_parameters *udimms[] = { - udimm0, -}; diff --git a/board/nxp/t104xrdb/law.c b/board/nxp/t104xrdb/law.c deleted file mode 100644 index d34641c2397..00000000000 --- a/board/nxp/t104xrdb/law.c +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include -#include -#include - -struct law_entry law_table[] = { -#ifdef CONFIG_MTD_NOR_FLASH - SET_LAW(CFG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), -#endif -#ifdef CFG_SYS_BMAN_MEM_PHYS - SET_LAW(CFG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), -#endif -#ifdef CFG_SYS_QMAN_MEM_PHYS - SET_LAW(CFG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), -#endif -#ifdef CFG_SYS_CPLD_BASE_PHYS - SET_LAW(CFG_SYS_CPLD_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC), -#endif -#ifdef CFG_SYS_DCSRBAR_PHYS - SET_LAW(CFG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), -#endif -#ifdef CFG_SYS_NAND_BASE_PHYS - SET_LAW(CFG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), -#endif -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/nxp/t104xrdb/spl.c b/board/nxp/t104xrdb/spl.c deleted file mode 100644 index e02a1f95d4c..00000000000 --- a/board/nxp/t104xrdb/spl.c +++ /dev/null @@ -1,131 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "../common/sleep.h" -#include "../common/spl.h" - -DECLARE_GLOBAL_DATA_PTR; - -phys_size_t get_effective_memsize(void) -{ - return CONFIG_SYS_L3_SIZE; -} - -#define FSL_CORENET_CCSR_PORSR1_RCW_MASK 0xFF800000 -void board_init_f(ulong bootflag) -{ - u32 plat_ratio, sys_clk, uart_clk; -#if defined(CONFIG_SPL_NAND_BOOT) && defined(CONFIG_A008044_WORKAROUND) - u32 porsr1, pinctl; - u32 svr = get_svr(); -#endif - ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR; - -#if defined(CONFIG_SPL_NAND_BOOT) && defined(CONFIG_A008044_WORKAROUND) - if (IS_SVR_REV(svr, 1, 0)) { - /* - * There is T1040 SoC issue where NOR, FPGA are inaccessible - * during NAND boot because IFC signals > IFC_AD7 are not - * enabled. This workaround changes RCW source to make all - * signals enabled. - */ - porsr1 = in_be32(&gur->porsr1); - pinctl = ((porsr1 & ~(FSL_CORENET_CCSR_PORSR1_RCW_MASK)) - | 0x24800000); - out_be32((unsigned int *)(CFG_SYS_DCSRBAR + 0x20000), - pinctl); - } -#endif - - /* Memcpy existing GD at CONFIG_SPL_GD_ADDR */ - memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t)); - - /* Update GD pointer */ - gd = (gd_t *)(CONFIG_SPL_GD_ADDR); - -#ifdef CONFIG_DEEP_SLEEP - /* disable the console if boot from deep sleep */ - if (is_warm_boot()) - fsl_dp_disable_console(); -#endif - /* compiler optimization barrier needed for GCC >= 3.4 */ - __asm__ __volatile__("" : : : "memory"); - - console_init_f(); - - /* initialize selected port with appropriate baud rate */ - sys_clk = get_board_sys_clk(); - plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; - uart_clk = sys_clk * plat_ratio / 2; - - ns16550_init((struct ns16550 *)CFG_SYS_NS16550_COM1, - uart_clk / 16 / CONFIG_BAUDRATE); - - relocate_code(CONFIG_SPL_RELOC_STACK, (gd_t *)CONFIG_SPL_GD_ADDR, 0x0); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - struct bd_info *bd; - - bd = (struct bd_info *)(gd + sizeof(gd_t)); - memset(bd, 0, sizeof(struct bd_info)); - gd->bd = bd; - - arch_cpu_init(); - get_clocks(); - mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, - CONFIG_SPL_RELOC_MALLOC_SIZE); - gd->flags |= GD_FLG_FULL_MALLOC_INIT; - -#ifdef CONFIG_SPL_MMC_BOOT - mmc_initialize(bd); -#endif - - /* relocate environment function pointers etc. */ -#if defined(CONFIG_ENV_IS_IN_NAND) || defined(CONFIG_ENV_IS_IN_MMC) || \ - defined(CONFIG_ENV_IS_IN_SPI_FLASH) -#ifdef CONFIG_SPL_NAND_BOOT - nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)SPL_ENV_ADDR); -#endif -#ifdef CONFIG_SPL_MMC_BOOT - mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)SPL_ENV_ADDR); -#endif -#ifdef CONFIG_SPL_SPI_BOOT - fsl_spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)SPL_ENV_ADDR); -#endif - gd->env_addr = (ulong)(SPL_ENV_ADDR); - gd->env_valid = ENV_VALID; -#endif - - i2c_init_all(); - - puts("\n\n"); - - dram_init(); - -#ifdef CONFIG_SPL_MMC_BOOT - mmc_boot(); -#elif defined(CONFIG_SPL_SPI_BOOT) - fsl_spi_boot(); -#elif defined(CONFIG_SPL_NAND_BOOT) - nand_boot(); -#endif -} diff --git a/board/nxp/t104xrdb/t1040_nand_rcw.cfg b/board/nxp/t104xrdb/t1040_nand_rcw.cfg deleted file mode 100644 index 3300c184a1a..00000000000 --- a/board/nxp/t104xrdb/t1040_nand_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x66 -0c18000e 0e000000 00000000 00000000 -66000002 80000002 e8106000 01000000 -00000000 00000000 00000000 00032810 -00000000 0342500f 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1040_sd_rcw.cfg b/board/nxp/t104xrdb/t1040_sd_rcw.cfg deleted file mode 100644 index fd3e8c5bbf5..00000000000 --- a/board/nxp/t104xrdb/t1040_sd_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x66 -0c18000e 0e000000 00000000 00000000 -66000002 80000002 68106000 01000000 -00000000 00000000 00000000 00032810 -00000000 0342500f 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1040_spi_rcw.cfg b/board/nxp/t104xrdb/t1040_spi_rcw.cfg deleted file mode 100644 index fccde5e01fe..00000000000 --- a/board/nxp/t104xrdb/t1040_spi_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x66 -0c18000e 0e000000 00000000 00000000 -66000002 80000002 58106000 01000000 -00000000 00000000 00000000 00032810 -00000000 0342500f 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1040d4_nand_rcw.cfg b/board/nxp/t104xrdb/t1040d4_nand_rcw.cfg deleted file mode 100644 index c1034b3dfa3..00000000000 --- a/board/nxp/t104xrdb/t1040d4_nand_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x66 -0c18000e 0e000000 00000000 00000000 -66000002 40000002 ec027000 01000000 -00000000 00000000 00000000 00030810 -00000000 0342580f 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1040d4_sd_rcw.cfg b/board/nxp/t104xrdb/t1040d4_sd_rcw.cfg deleted file mode 100644 index e6f7585bb02..00000000000 --- a/board/nxp/t104xrdb/t1040d4_sd_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x66 -0c18000e 0e000000 00000000 00000000 -66000002 40000002 6c027000 01000000 -00000000 00000000 00000000 00030810 -00000000 0342580f 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1040d4_spi_rcw.cfg b/board/nxp/t104xrdb/t1040d4_spi_rcw.cfg deleted file mode 100644 index cde862dff5c..00000000000 --- a/board/nxp/t104xrdb/t1040d4_spi_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x66 -0c18000e 0e000000 00000000 00000000 -66000002 40000002 5c027000 01000000 -00000000 00000000 00000000 00030810 -00000000 0342580f 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1042_nand_rcw.cfg b/board/nxp/t104xrdb/t1042_nand_rcw.cfg deleted file mode 100644 index db4d52f397d..00000000000 --- a/board/nxp/t104xrdb/t1042_nand_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x86 -0c18000e 0e000000 00000000 00000000 -86000002 80000002 ec027000 01000000 -00000000 00000000 00000000 00032810 -00000000 0342500f 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1042_pi_nand_rcw.cfg b/board/nxp/t104xrdb/t1042_pi_nand_rcw.cfg deleted file mode 100644 index 57de89ad0e7..00000000000 --- a/board/nxp/t104xrdb/t1042_pi_nand_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x06 -0c18000e 0e000000 00000000 00000000 -06000002 00400002 e8106000 01000000 -00000000 00000000 00000000 00030810 -00000000 01fe0a06 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1042_pi_sd_rcw.cfg b/board/nxp/t104xrdb/t1042_pi_sd_rcw.cfg deleted file mode 100644 index bbce9a36930..00000000000 --- a/board/nxp/t104xrdb/t1042_pi_sd_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x06 -0c18000e 0e000000 00000000 00000000 -06000002 00400002 68106000 01000000 -00000000 00000000 00000000 00030810 -00000000 01fe0a06 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1042_pi_spi_rcw.cfg b/board/nxp/t104xrdb/t1042_pi_spi_rcw.cfg deleted file mode 100644 index b1d8b4c65af..00000000000 --- a/board/nxp/t104xrdb/t1042_pi_spi_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x06 -0c18000e 0e000000 00000000 00000000 -06000002 00400002 58106000 01000000 -00000000 00000000 00000000 00030810 -00000000 01fe0a06 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1042_sd_rcw.cfg b/board/nxp/t104xrdb/t1042_sd_rcw.cfg deleted file mode 100644 index d77bf189b22..00000000000 --- a/board/nxp/t104xrdb/t1042_sd_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x86 -0c18000e 0e000000 00000000 00000000 -86000002 80000002 6c027000 01000000 -00000000 00000000 00000000 00032810 -00000000 0342500f 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1042_spi_rcw.cfg b/board/nxp/t104xrdb/t1042_spi_rcw.cfg deleted file mode 100644 index e8a3ad12804..00000000000 --- a/board/nxp/t104xrdb/t1042_spi_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x86 -0c18000e 0e000000 00000000 00000000 -86000002 80000002 5c027000 01000000 -00000000 00000000 00000000 00032810 -00000000 0342500f 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1042d4_nand_rcw.cfg b/board/nxp/t104xrdb/t1042d4_nand_rcw.cfg deleted file mode 100644 index 9e0ee2795f8..00000000000 --- a/board/nxp/t104xrdb/t1042d4_nand_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x86 -0c18000e 0e000000 00000000 00000000 -86000002 40000002 ec027000 01000000 -00000000 00000000 00000000 00030810 -00000000 0342500f 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1042d4_sd_rcw.cfg b/board/nxp/t104xrdb/t1042d4_sd_rcw.cfg deleted file mode 100644 index 9d9046d6549..00000000000 --- a/board/nxp/t104xrdb/t1042d4_sd_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x86 -0c18000e 0e000000 00000000 00000000 -86000002 40000002 6c027000 01000000 -00000000 00000000 00000000 00030810 -00000000 0342500f 00000000 00000000 diff --git a/board/nxp/t104xrdb/t1042d4_spi_rcw.cfg b/board/nxp/t104xrdb/t1042d4_spi_rcw.cfg deleted file mode 100644 index f1ec98932f8..00000000000 --- a/board/nxp/t104xrdb/t1042d4_spi_rcw.cfg +++ /dev/null @@ -1,7 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 010e0100 -# serdes protocol 0x86 -0c18000e 0e000000 00000000 00000000 -86000002 40000002 5c027000 01000000 -00000000 00000000 00000000 00030810 -00000000 0342500f 00000000 00000000 diff --git a/board/nxp/t104xrdb/t104x_pbi.cfg b/board/nxp/t104xrdb/t104x_pbi.cfg deleted file mode 100644 index 51945b47489..00000000000 --- a/board/nxp/t104xrdb/t104x_pbi.cfg +++ /dev/null @@ -1,36 +0,0 @@ -#PBI commands -#Software Workaround for errata A-007662 to train PCIe2 controller in Gen2 speed -09250100 00000400 -09250108 00002000 -#Software Workaround for errata A-008007 to reset PVR register -09000010 0000000b -09000014 c0000000 -09000018 81d00017 -89020400 a1000000 -091380c0 000f0000 -89020400 00000000 -#Initialize CPC1 -09010000 00200400 -09138000 00000000 -091380c0 00000100 -#Configure CPC1 as 256KB SRAM -09010100 00000000 -09010104 fffc0007 -09010f00 081e000d -09010000 80000000 -#Configure LAW for CPC1 -09000cd0 00000000 -09000cd4 fffc0000 -09000cd8 81000011 -#Configure alternate space -09000010 00000000 -09000014 ff000000 -09000018 81000000 -#Configure SPI controller -09110000 80000403 -09110020 2d170008 -09110024 00100008 -09110028 00100008 -0911002c 00100008 -#Flush PBL data -091380c0 000FFFFF diff --git a/board/nxp/t104xrdb/t104x_pbi_sb.cfg b/board/nxp/t104xrdb/t104x_pbi_sb.cfg deleted file mode 100644 index 98dc8e4c240..00000000000 --- a/board/nxp/t104xrdb/t104x_pbi_sb.cfg +++ /dev/null @@ -1,38 +0,0 @@ -#PBI commands -#Software Workaround for errata A-007662 to train PCIe2 controller in Gen2 speed -09250100 00000400 -09250108 00002000 -#Software Workaround for errata A-008007 to reset PVR register -09000010 0000000b -09000014 c0000000 -09000018 81d00017 -89020400 a1000000 -091380c0 000f0000 -89020400 00000000 -#Initialize CPC1 -09010000 00200400 -09138000 00000000 -091380c0 00000100 -#Configure CPC1 as 256KB SRAM -09010100 00000000 -09010104 bffc0007 -09010f00 081e000d -09010000 80000000 -#Configure LAW for CPC1 -09000cd0 00000000 -09000cd4 bffc0000 -09000cd8 81000011 -#Configure alternate space -09000010 00000000 -09000014 bf000000 -09000018 81000000 -#Configure SPI controller -09110000 80000403 -09110020 2d170008 -09110024 00100008 -09110028 00100008 -0911002c 00100008 -#Flush PBL data -091380c0 000FFFFF -090e0200 bffd0000 -091380c0 000FFFFF diff --git a/board/nxp/t104xrdb/t104xrdb.c b/board/nxp/t104xrdb/t104xrdb.c deleted file mode 100644 index ef4dfef4965..00000000000 --- a/board/nxp/t104xrdb/t104xrdb.c +++ /dev/null @@ -1,159 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * Copyright 2023 NXP - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "../common/sleep.h" -#include "t104xrdb.h" -#include "cpld.h" - -DECLARE_GLOBAL_DATA_PTR; - -#if CONFIG_IS_ENABLED(DM_SERIAL) -int get_serial_clock(void) -{ - return get_bus_freq(0) / 2; -} -#endif - -int checkboard(void) -{ - struct cpu_type *cpu = gd->arch.cpu; - u8 sw; - -#if defined(CONFIG_TARGET_T1042D4RDB) - printf("Board: %sD4RDB\n", cpu->name); -#else - printf("Board: %sRDB\n", cpu->name); -#endif - printf("Board rev: 0x%02x CPLD ver: 0x%02x, ", - CPLD_READ(hw_ver), CPLD_READ(sw_ver)); - - sw = CPLD_READ(flash_ctl_status); - sw = ((sw & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT); - - printf("vBank: %d\n", sw); - - return 0; -} - -int board_early_init_f(void) -{ -#if defined(CONFIG_DEEP_SLEEP) - if (is_warm_boot()) - fsl_dp_disable_console(); -#endif - - return 0; -} - -int board_early_init_r(void) -{ -#ifdef CFG_SYS_FLASH_BASE - const unsigned int flashbase = CFG_SYS_FLASH_BASE; - int flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap Boot flash region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - if (flash_esel == -1) { - /* very unlikely unless something is messed up */ - puts("Error: Could not find TLB for FLASH BASE\n"); - flash_esel = 2; /* give our best effort to continue */ - } else { - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); - } - - set_tlb(1, flashbase, CFG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); -#endif - - pci_init(); - - return 0; -} - -int misc_init_r(void) -{ - ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR); - u32 srds_s1; - - srds_s1 = in_be32(&gur->rcwsr[4]) >> 24; - - printf("SERDES Reference : 0x%X\n", srds_s1); - - /* select SGMII*/ - if (srds_s1 == 0x86) - CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) | - MISC_CTL_SG_SEL); - - /* select SGMII and Aurora*/ - if (srds_s1 == 0x8E) - CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) | - MISC_CTL_SG_SEL | MISC_CTL_AURORA_SEL); - - return 0; -} - -int ft_board_setup(void *blob, struct bd_info *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = env_get_bootm_low(); - size = env_get_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#ifdef CONFIG_PCI - pci_of_setup(blob, bd); -#endif - - fdt_fixup_liodn(blob); - -#ifdef CONFIG_HAS_FSL_DR_USB - fsl_fdt_fixup_dr_usb(blob, bd); -#endif - -#ifdef CONFIG_SYS_DPAA_FMAN -#ifndef CONFIG_DM_ETH - fdt_fixup_fman_ethernet(blob); -#endif -#endif - - if (hwconfig("qe-tdm")) - fdt_del_diu(blob); - return 0; -} diff --git a/board/nxp/t104xrdb/t104xrdb.h b/board/nxp/t104xrdb/t104xrdb.h deleted file mode 100644 index 5825e69cdb4..00000000000 --- a/board/nxp/t104xrdb/t104xrdb.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#ifndef __T104x_RDB_H__ -#define __T104x_RDB_H__ - -void pci_of_setup(void *blob, struct bd_info *bd); - -#endif diff --git a/board/nxp/t104xrdb/tlb.c b/board/nxp/t104xrdb/tlb.c deleted file mode 100644 index 7b2183da8b0..00000000000 --- a/board/nxp/t104xrdb/tlb.c +++ /dev/null @@ -1,132 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include -#include -#include - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR, - CFG_SYS_INIT_RAM_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 4 * 1024, - CFG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 8 * 1024, - CFG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 12 * 1024, - CFG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Covers boot page */ -#if defined(CONFIG_SYS_RAMBOOT) && defined(CFG_SYS_INIT_L3_ADDR) && \ - !defined(CONFIG_NXP_ESBC) - /* - * *I*G - L3SRAM. When L3 is used as 256K SRAM, the address of the - * SRAM is at 0xfffc0000, it covered the 0xfffff000. - */ - SET_TLB_ENTRY(1, CFG_SYS_INIT_L3_ADDR, CFG_SYS_INIT_L3_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_256K, 1), - -#elif defined(CONFIG_NXP_ESBC) && defined(CONFIG_XPL_BUILD) - /* - * *I*G - L3SRAM. When L3 is used as 256K SRAM, in case of Secure Boot - * the physical address of the SRAM is at 0xbffc0000, - * and virtual address is 0xfffc0000 - */ - - SET_TLB_ENTRY(1, CFG_SYS_INIT_L3_VADDR, - CFG_SYS_INIT_L3_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_256K, 1), -#else - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_4K, 1), -#endif - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CFG_SYS_CCSRBAR, CFG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_16M, 1), - - /* *I*G* - Flash, localbus */ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - -#ifndef CONFIG_XPL_BUILD - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CFG_SYS_PCIE1_MEM_VIRT, CFG_SYS_PCIE1_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1G, 1), - - /* *I*G* - PCI I/O */ - SET_TLB_ENTRY(1, CFG_SYS_PCIE1_IO_VIRT, CFG_SYS_PCIE1_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256K, 1), - - /* Bman/Qman */ -#ifdef CFG_SYS_BMAN_MEM_PHYS - SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE, CFG_SYS_BMAN_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 5, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE + 0x01000000, - CFG_SYS_BMAN_MEM_PHYS + 0x01000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_16M, 1), -#endif -#ifdef CFG_SYS_QMAN_MEM_PHYS - SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE, CFG_SYS_QMAN_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 7, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE + 0x01000000, - CFG_SYS_QMAN_MEM_PHYS + 0x01000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_16M, 1), -#endif -#endif -#ifdef CFG_SYS_DCSRBAR_PHYS - SET_TLB_ENTRY(1, CFG_SYS_DCSRBAR, CFG_SYS_DCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 9, BOOKE_PAGESZ_4M, 1), -#endif -#ifdef CFG_SYS_NAND_BASE - /* - * *I*G - NAND - * entry 14 and 15 has been used hard coded, they will be disabled - * in cpu_init_f, so we use entry 16 for nand. - */ - SET_TLB_ENTRY(1, CFG_SYS_NAND_BASE, CFG_SYS_NAND_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 10, BOOKE_PAGESZ_64K, 1), -#endif -#ifdef CFG_SYS_CPLD_BASE - SET_TLB_ENTRY(1, CFG_SYS_CPLD_BASE, CFG_SYS_CPLD_BASE_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 11, BOOKE_PAGESZ_256K, 1), -#endif - -#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_XPL_BUILD) - SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 12, BOOKE_PAGESZ_1G, 1), - SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE + 0x40000000, - CFG_SYS_DDR_SDRAM_BASE + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 13, BOOKE_PAGESZ_1G, 1) -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/T1042D4RDB_NAND_defconfig b/configs/T1042D4RDB_NAND_defconfig deleted file mode 100644 index 7ec5bfd2ad0..00000000000 --- a/configs/T1042D4RDB_NAND_defconfig +++ /dev/null @@ -1,144 +0,0 @@ -CONFIG_PPC=y -CONFIG_TEXT_BASE=0x30000000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x180000 -CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb" -CONFIG_SYS_MONITOR_LEN=786432 -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_TEXT_BASE=0xFFFD8000 -CONFIG_SPL=y -CONFIG_MPC85xx=y -CONFIG_SYS_INIT_RAM_LOCK=y -CONFIG_TARGET_T1042D4RDB=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y -CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y -CONFIG_USE_UBOOTPATH=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_PCIE4=y -CONFIG_SYS_FSL_NUM_CC_PLLS=2 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="$(SRCTREE)/board/nxp/t104xrdb/t104x_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="$(SRCTREE)/board/nxp/t104xrdb/t1042d4_nand_rcw.cfg" -CONFIG_BOOTDELAY=10 -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" -CONFIG_SYS_PBSIZE=276 -CONFIG_SILENT_CONSOLE=y -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_MAX_SIZE=0x28000 -CONFIG_SPL_PAD_TO=0x40000 -CONFIG_SPL_NAND_BOOT=y -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y -CONFIG_SPL_FLUSH_IMAGE=y -CONFIG_SPL_SKIP_RELOCATE=y -CONFIG_SPL_GD_ADDR=0xfffc8000 -CONFIG_SPL_RELOC_STACK=0xfffd8000 -CONFIG_SPL_RELOC_MALLOC=y -CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 -CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_DM=y -CONFIG_CMD_I2C=y -CONFIG_LOADS_ECHO=y -CONFIG_SYS_LOADS_BAUD_CHANGE=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC4" -CONFIG_USE_ROOTPATH=y -CONFIG_FSL_CAAM=y -CONFIG_DDR_CLK_FREQ=66666666 -CONFIG_CHIP_SELECTS_PER_CTRL=2 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_FSL_I2C_OFFSET=0x118000 -CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y -CONFIG_SYS_FSL_I2C2_OFFSET=0x118100 -CONFIG_SYS_FSL_HAS_I2C3_OFFSET=y -CONFIG_SYS_FSL_I2C3_OFFSET=0x119000 -CONFIG_SYS_FSL_HAS_I2C4_OFFSET=y -CONFIG_SYS_FSL_I2C4_OFFSET=0x119100 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y -CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000 -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_DM_MDIO=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x280000 -CONFIG_MII=y -CONFIG_PHYLIB=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_PCIE_FSL=y -CONFIG_U_QE=y -CONFIG_SYS_QE_FW_ADDR=0x380000 -CONFIG_SYS_QE_FMAN_FW_IN_NAND=y -CONFIG_DM_RTC=y -CONFIG_RTC_DS1337=y -CONFIG_DM_SERIAL=y -CONFIG_SPL_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T1042D4RDB_SDCARD_defconfig b/configs/T1042D4RDB_SDCARD_defconfig deleted file mode 100644 index c418c3064d4..00000000000 --- a/configs/T1042D4RDB_SDCARD_defconfig +++ /dev/null @@ -1,138 +0,0 @@ -CONFIG_PPC=y -CONFIG_TEXT_BASE=0x30000000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb" -CONFIG_SYS_MONITOR_LEN=786432 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_TEXT_BASE=0xFFFD8000 -CONFIG_SPL=y -CONFIG_MPC85xx=y -CONFIG_SYS_INIT_RAM_LOCK=y -CONFIG_TARGET_T1042D4RDB=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y -CONFIG_USE_UBOOTPATH=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_PCIE4=y -CONFIG_SYS_FSL_NUM_CC_PLLS=2 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="$(SRCTREE)/board/nxp/t104xrdb/t104x_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="$(SRCTREE)/board/nxp/t104xrdb/t1042d4_sd_rcw.cfg" -CONFIG_BOOTDELAY=10 -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" -CONFIG_SYS_PBSIZE=276 -CONFIG_SILENT_CONSOLE=y -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_MAX_SIZE=0x28000 -CONFIG_SPL_PAD_TO=0x40000 -CONFIG_SPL_MMC_BOOT=y -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y -CONFIG_SPL_FLUSH_IMAGE=y -CONFIG_SPL_SKIP_RELOCATE=y -CONFIG_SPL_GD_ADDR=0xfffc8000 -CONFIG_SPL_RELOC_STACK=0xfffd8000 -CONFIG_SPL_RELOC_MALLOC=y -CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 -CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_DM=y -CONFIG_CMD_I2C=y -CONFIG_LOADS_ECHO=y -CONFIG_SYS_LOADS_BAUD_CHANGE=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC4" -CONFIG_USE_ROOTPATH=y -CONFIG_FSL_CAAM=y -CONFIG_DDR_CLK_FREQ=66666666 -CONFIG_CHIP_SELECTS_PER_CTRL=2 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_FSL_I2C_OFFSET=0x118000 -CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y -CONFIG_SYS_FSL_I2C2_OFFSET=0x118100 -CONFIG_SYS_FSL_HAS_I2C3_OFFSET=y -CONFIG_SYS_FSL_I2C3_OFFSET=0x119000 -CONFIG_SYS_FSL_HAS_I2C4_OFFSET=y -CONFIG_SYS_FSL_I2C4_OFFSET=0x119100 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_DM_MDIO=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x10400 -CONFIG_MII=y -CONFIG_PHYLIB=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_PCIE_FSL=y -CONFIG_U_QE=y -CONFIG_SYS_QE_FW_ADDR=0x124000 -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y -CONFIG_DM_RTC=y -CONFIG_RTC_DS1337=y -CONFIG_DM_SERIAL=y -CONFIG_SPL_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T1042D4RDB_SPIFLASH_defconfig b/configs/T1042D4RDB_SPIFLASH_defconfig deleted file mode 100644 index f758cd9aaa5..00000000000 --- a/configs/T1042D4RDB_SPIFLASH_defconfig +++ /dev/null @@ -1,141 +0,0 @@ -CONFIG_PPC=y -CONFIG_TEXT_BASE=0x30000000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb" -CONFIG_SYS_MONITOR_LEN=786432 -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_TEXT_BASE=0xFFFD8000 -CONFIG_SPL=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI=y -CONFIG_MPC85xx=y -CONFIG_SYS_INIT_RAM_LOCK=y -CONFIG_TARGET_T1042D4RDB=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y -CONFIG_USE_UBOOTPATH=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_PCIE4=y -CONFIG_SYS_FSL_NUM_CC_PLLS=2 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SPIFLASH=y -CONFIG_SYS_FSL_PBL_PBI="$(SRCTREE)/board/nxp/t104xrdb/t104x_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="$(SRCTREE)/board/nxp/t104xrdb/t1042d4_spi_rcw.cfg" -CONFIG_BOOTDELAY=10 -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" -CONFIG_SYS_PBSIZE=276 -CONFIG_SILENT_CONSOLE=y -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_MAX_SIZE=0x28000 -CONFIG_SPL_PAD_TO=0x40000 -CONFIG_SPL_SPI_BOOT=y -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y -CONFIG_SPL_FLUSH_IMAGE=y -CONFIG_SPL_SKIP_RELOCATE=y -CONFIG_SPL_GD_ADDR=0xfffc8000 -CONFIG_SPL_RELOC_STACK=0xfffd8000 -CONFIG_SPL_RELOC_MALLOC=y -CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 -CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_DM=y -CONFIG_CMD_I2C=y -CONFIG_LOADS_ECHO=y -CONFIG_SYS_LOADS_BAUD_CHANGE=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC4" -CONFIG_USE_ROOTPATH=y -CONFIG_FSL_CAAM=y -CONFIG_DDR_CLK_FREQ=66666666 -CONFIG_CHIP_SELECTS_PER_CTRL=2 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_FSL_I2C_OFFSET=0x118000 -CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y -CONFIG_SYS_FSL_I2C2_OFFSET=0x118100 -CONFIG_SYS_FSL_HAS_I2C3_OFFSET=y -CONFIG_SYS_FSL_I2C3_OFFSET=0x119000 -CONFIG_SYS_FSL_HAS_I2C4_OFFSET=y -CONFIG_SYS_FSL_I2C4_OFFSET=0x119100 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_DM_MDIO=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x110000 -CONFIG_MII=y -CONFIG_PHYLIB=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_PCIE_FSL=y -CONFIG_U_QE=y -CONFIG_SYS_QE_FW_ADDR=0x130000 -CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y -CONFIG_DM_RTC=y -CONFIG_RTC_DS1337=y -CONFIG_DM_SERIAL=y -CONFIG_SPL_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T1042D4RDB_defconfig b/configs/T1042D4RDB_defconfig deleted file mode 100644 index 6e53e581c81..00000000000 --- a/configs/T1042D4RDB_defconfig +++ /dev/null @@ -1,114 +0,0 @@ -CONFIG_PPC=y -CONFIG_TEXT_BASE=0xEFF40000 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb" -CONFIG_SYS_MONITOR_LEN=786432 -CONFIG_ENV_ADDR=0xEFF20000 -CONFIG_MPC85xx=y -CONFIG_SYS_INIT_RAM_LOCK=y -CONFIG_TARGET_T1042D4RDB=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_USE_UBOOTPATH=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_PCIE4=y -CONFIG_SYS_FSL_NUM_CC_PLLS=2 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_BOOTDELAY=10 -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" -CONFIG_SYS_PBSIZE=276 -CONFIG_SILENT_CONSOLE=y -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_DM=y -CONFIG_CMD_I2C=y -CONFIG_LOADS_ECHO=y -CONFIG_SYS_LOADS_BAUD_CHANGE=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC4" -CONFIG_USE_ROOTPATH=y -CONFIG_FSL_CAAM=y -CONFIG_DDR_CLK_FREQ=66666666 -CONFIG_CHIP_SELECTS_PER_CTRL=2 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_FSL_I2C_OFFSET=0x118000 -CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y -CONFIG_SYS_FSL_I2C2_OFFSET=0x118100 -CONFIG_SYS_FSL_HAS_I2C3_OFFSET=y -CONFIG_SYS_FSL_I2C3_OFFSET=0x119000 -CONFIG_SYS_FSL_HAS_I2C4_OFFSET=y -CONFIG_SYS_FSL_I2C4_OFFSET=0x119100 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_DM_MDIO=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0xEFF00000 -CONFIG_MII=y -CONFIG_PHYLIB=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_PCIE_FSL=y -CONFIG_U_QE=y -CONFIG_SYS_QE_FW_ADDR=0xEFF10000 -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_DM_RTC=y -CONFIG_RTC_DS1337=y -CONFIG_SPECIFY_CONSOLE_INDEX=y -CONFIG_DM_SERIAL=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h deleted file mode 100644 index 01db298f38e..00000000000 --- a/include/configs/T104xRDB.h +++ /dev/null @@ -1,397 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - * Copyright 2020-2023 NXP - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -/* - * T104x RDB board configuration file - */ -#include - -#ifdef CONFIG_RAMBOOT_PBL -#define RESET_VECTOR_OFFSET 0x27FFC -#define BOOT_PAGE_OFFSET 0x27000 - -#ifdef CONFIG_MTD_RAW_NAND -#ifdef CONFIG_NXP_ESBC -#define CFG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + (16 << 10)) -#else -#define CFG_SYS_NAND_U_BOOT_SIZE (768 << 10) -#endif -#define CFG_SYS_NAND_U_BOOT_DST 0x30000000 -#define CFG_SYS_NAND_U_BOOT_START 0x30000000 -#endif - -#ifdef CONFIG_SPIFLASH -#define CFG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) -#define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) -#define CFG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) -#define CFG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) -#endif - -#ifdef CONFIG_SDCARD -#define CFG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CFG_SYS_MMC_U_BOOT_DST (0x30000000) -#define CFG_SYS_MMC_U_BOOT_START (0x30000000) -#define CFG_SYS_MMC_U_BOOT_OFFS (260 << 10) -#endif - -#endif - -/* High Level Configuration Options */ - -#ifndef CFG_RESET_VECTOR_ADDRESS -#define CFG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -#define CFG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CFG_SYS_INIT_L2CSR0 L2CSR0_L2E - -/* - * Config the L3 Cache as L3 SRAM - */ -#define CFG_SYS_INIT_L3_ADDR 0xFFFC0000 -/* - * For Secure Boot CFG_SYS_INIT_L3_ADDR will be redefined and hence - * Physical address (CFG_SYS_INIT_L3_ADDR) and virtual address - * (CFG_SYS_INIT_L3_VADDR) will be different. - */ -#define CFG_SYS_INIT_L3_VADDR 0xFFFC0000 -#define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) - -#define CFG_SYS_DCSRBAR 0xf0000000 -#define CFG_SYS_DCSRBAR_PHYS 0xf00000000ull - -/* - * DDR Setup - */ -#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE - -#define SPD_EEPROM_ADDRESS 0x51 - -#define CFG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ - -/* - * IFC Definitions - */ -#define CFG_SYS_FLASH_BASE 0xe8000000 -#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE) - -#define CFG_SYS_NOR_CSPR_EXT (0xf) -#define CFG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE) | \ - CSPR_PORT_SIZE_16 | \ - CSPR_MSEL_NOR | \ - CSPR_V) -#define CFG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) - -/* - * TDM Definition - */ -#define T1040_TDM_QUIRK_CCSR_BASE 0xfe000000 - -/* NOR Flash Timing Params */ -#define CFG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 -#define CFG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ - FTIM0_NOR_TEADC(0x5) | \ - FTIM0_NOR_TEAHC(0x5)) -#define CFG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ - FTIM1_NOR_TRAD_NOR(0x1A) |\ - FTIM1_NOR_TSEQRAD_NOR(0x13)) -#define CFG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ - FTIM2_NOR_TCH(0x4) | \ - FTIM2_NOR_TWPH(0x0E) | \ - FTIM2_NOR_TWP(0x1c)) -#define CFG_SYS_NOR_FTIM3 0x0 - -#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} - -/* CPLD on IFC */ -#define CPLD_LBMAP_MASK 0x3F -#define CPLD_BANK_SEL_MASK 0x07 -#define CPLD_BANK_OVERRIDE 0x40 -#define CPLD_LBMAP_ALTBANK 0x44 /* BANK OR | BANK 4 */ -#define CPLD_LBMAP_DFLTBANK 0x40 /* BANK OR | BANK0 */ -#define CPLD_LBMAP_RESET 0xFF -#define CPLD_LBMAP_SHIFT 0x03 - -#if defined(CONFIG_TARGET_T1042D4RDB) -#define CPLD_DIU_SEL_DFP 0xc0 -#endif - -#define CFG_SYS_CPLD_BASE 0xffdf0000 -#define CFG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CFG_SYS_CPLD_BASE) -#define CFG_SYS_CSPR2_EXT (0xf) -#define CFG_SYS_CSPR2 (CSPR_PHYS_ADDR(CFG_SYS_CPLD_BASE_PHYS) \ - | CSPR_PORT_SIZE_8 \ - | CSPR_MSEL_GPCM \ - | CSPR_V) -#define CFG_SYS_AMASK2 IFC_AMASK(64*1024) -#define CFG_SYS_CSOR2 0x0 -/* CPLD Timing parameters for IFC CS2 */ -#define CFG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ - FTIM0_GPCM_TEADC(0x0e) | \ - FTIM0_GPCM_TEAHC(0x0e)) -#define CFG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ - FTIM1_GPCM_TRAD(0x1f)) -#define CFG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x8) | \ - FTIM2_GPCM_TWP(0x1f)) -#define CFG_SYS_CS2_FTIM3 0x0 - -/* NAND Flash on IFC */ -#define CFG_SYS_NAND_BASE 0xff800000 -#define CFG_SYS_NAND_BASE_PHYS (0xf00000000ull | CFG_SYS_NAND_BASE) - -#define CFG_SYS_NAND_CSPR_EXT (0xf) -#define CFG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CFG_SYS_NAND_BASE_PHYS) \ - | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ - | CSPR_MSEL_NAND /* MSEL = NAND */ \ - | CSPR_V) -#define CFG_SYS_NAND_AMASK IFC_AMASK(64*1024) - -#define CFG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ - | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ - | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ - | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ - | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ - | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \ - | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ - -/* ONFI NAND Flash mode0 Timing Params */ -#define CFG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ - FTIM0_NAND_TWP(0x18) | \ - FTIM0_NAND_TWCHT(0x07) | \ - FTIM0_NAND_TWH(0x0a)) -#define CFG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ - FTIM1_NAND_TWBE(0x39) | \ - FTIM1_NAND_TRR(0x0e) | \ - FTIM1_NAND_TRP(0x18)) -#define CFG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ - FTIM2_NAND_TREH(0x0a) | \ - FTIM2_NAND_TWHRE(0x1e)) -#define CFG_SYS_NAND_FTIM3 0x0 - -#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } - -#if defined(CONFIG_MTD_RAW_NAND) -#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 -#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR_CSPR_EXT -#define CFG_SYS_CSPR1 CFG_SYS_NOR_CSPR -#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#else -#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR_CSPR_EXT -#define CFG_SYS_CSPR0 CFG_SYS_NOR_CSPR -#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CFG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT -#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR -#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK -#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR -#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 -#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 -#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 -#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 -#endif - -/* define to use L1 as initial stack */ -#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ -#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 -/* The assembler doesn't like typecast */ -#define CFG_SYS_INIT_RAM_ADDR_PHYS \ - ((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CFG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#define CFG_SYS_INIT_RAM_SIZE 0x00004000 - -#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* Serial Port - controlled on board with jumper J8 - * open - index 2 - * shorted - index 1 - */ -#if !CONFIG_IS_ENABLED(DM_SERIAL) -#define CFG_SYS_NS16550_CLK (get_bus_freq(0)/2) -#endif - -#define CFG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x11C500) -#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x11C600) -#define CFG_SYS_NS16550_COM3 (CFG_SYS_CCSRBAR+0x11D500) -#define CFG_SYS_NS16550_COM4 (CFG_SYS_CCSRBAR+0x11D600) - -/* I2C bus multiplexer */ -#define I2C_MUX_PCA_ADDR 0x70 -#define I2C_MUX_CH_DEFAULT 0x8 - -#if defined(CONFIG_TARGET_T1042D4RDB) -/* - * RTC configuration - */ -#define CFG_SYS_I2C_RTC_ADDR 0x68 - -#endif - -/* - * eSPI - Enhanced SPI - */ - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ - -#ifdef CONFIG_PCI -/* controller 1, direct to uli, tgtid 3, Base address 20000 */ -#ifdef CONFIG_PCIE1 -#define CFG_SYS_PCIE1_MEM_VIRT 0x80000000 -#define CFG_SYS_PCIE1_MEM_PHYS 0xc00000000ull -#define CFG_SYS_PCIE1_IO_VIRT 0xf8000000 -#define CFG_SYS_PCIE1_IO_PHYS 0xff8000000ull -#endif - -/* controller 2, Slot 2, tgtid 2, Base address 201000 */ -#ifdef CONFIG_PCIE2 -#define CFG_SYS_PCIE2_MEM_VIRT 0x90000000 -#define CFG_SYS_PCIE2_MEM_PHYS 0xc10000000ull -#define CFG_SYS_PCIE2_IO_VIRT 0xf8010000 -#define CFG_SYS_PCIE2_IO_PHYS 0xff8010000ull -#endif - -/* controller 3, Slot 1, tgtid 1, Base address 202000 */ -#ifdef CONFIG_PCIE3 -#define CFG_SYS_PCIE3_MEM_VIRT 0xa0000000 -#define CFG_SYS_PCIE3_MEM_PHYS 0xc20000000ull -#endif - -/* controller 4, Base address 203000 */ -#ifdef CONFIG_PCIE4 -#define CFG_SYS_PCIE4_MEM_VIRT 0xb0000000 -#define CFG_SYS_PCIE4_MEM_PHYS 0xc30000000ull -#endif -#endif /* CONFIG_PCI */ - -/* -* USB -*/ - -#ifdef CONFIG_MMC -#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR -#endif - -/* Qman/Bman */ -#ifndef CONFIG_NOBQFMAN -#define CFG_SYS_BMAN_NUM_PORTALS 10 -#define CFG_SYS_BMAN_MEM_BASE 0xf4000000 -#define CFG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#define CFG_SYS_BMAN_MEM_SIZE 0x02000000 -#define CFG_SYS_BMAN_SP_CENA_SIZE 0x4000 -#define CFG_SYS_BMAN_SP_CINH_SIZE 0x1000 -#define CFG_SYS_BMAN_CENA_BASE CFG_SYS_BMAN_MEM_BASE -#define CFG_SYS_BMAN_CENA_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) -#define CFG_SYS_BMAN_CINH_BASE (CFG_SYS_BMAN_MEM_BASE + \ - CFG_SYS_BMAN_CENA_SIZE) -#define CFG_SYS_BMAN_CINH_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) -#define CFG_SYS_BMAN_SWP_ISDR_REG 0xE08 -#define CFG_SYS_QMAN_NUM_PORTALS 10 -#define CFG_SYS_QMAN_MEM_BASE 0xf6000000 -#define CFG_SYS_QMAN_MEM_PHYS 0xff6000000ull -#define CFG_SYS_QMAN_MEM_SIZE 0x02000000 -#define CFG_SYS_QMAN_SP_CINH_SIZE 0x1000 -#define CFG_SYS_QMAN_CENA_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) -#define CFG_SYS_QMAN_CINH_BASE (CFG_SYS_QMAN_MEM_BASE + \ - CFG_SYS_QMAN_CENA_SIZE) -#define CFG_SYS_QMAN_CINH_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) -#define CFG_SYS_QMAN_SWP_ISDR_REG 0xE08 -#endif /* CONFIG_NOBQFMAN */ - -#ifdef CONFIG_FMAN_ENET -#if defined(CONFIG_TARGET_T1042D4RDB) -#define CFG_SYS_SGMII1_PHY_ADDR 0x02 -#define CFG_SYS_SGMII2_PHY_ADDR 0x03 -#define CFG_SYS_SGMII3_PHY_ADDR 0x01 -#endif - -#define CFG_SYS_RGMII1_PHY_ADDR 0x01 -#define CFG_SYS_RGMII2_PHY_ADDR 0x02 -#endif - -/* - * Miscellaneous configurable options - */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ - -/* - * Dynamic MTD Partition support with mtdparts - */ - -/* - * Environment Configuration - */ - -#define __USB_PHY_TYPE utmi -#define RAMDISKFILE "t104xrdb/ramdisk.uboot" - -#if defined(CONFIG_TARGET_T1042D4RDB) -#define FDTFILE "t1042rdb/t1042d4rdb.dtb" -#endif - -#define CFG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ - "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ - "netdev=eth0\0" \ - "uboot=" CONFIG_UBOOTPATH "\0" \ - "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \ - "tftpflash=tftpboot $loadaddr $uboot && " \ - "protect off $ubootaddr +$filesize && " \ - "erase $ubootaddr +$filesize && " \ - "cp.b $loadaddr $ubootaddr $filesize && " \ - "protect on $ubootaddr +$filesize && " \ - "cmp.b $loadaddr $ubootaddr $filesize\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=" __stringify(RAMDISKFILE) "\0" \ - "fdtaddr=1e00000\0" \ - "fdtfile=" __stringify(FDTFILE) "\0" \ - "bdev=sda3\0" - -#include - -#endif /* __CONFIG_H */ -- 2.47.3