All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rosen Penev <rosenp@gmail.com>
To: linux-mips@vger.kernel.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] MIPS: lib: prefetch ahead in csum_partial()
Date: Fri,  9 Oct 2026 23:54:42 -0700	[thread overview]
Message-ID: <20261010065442.23780-1-rosenp@gmail.com> (raw)

csum_partial() reads every byte of the buffer once. Cores like the 74K
have no hardware prefetcher, so every cache line is a demand miss, and
after a non-coherent DMA the received data is never in the cache. With
GRO enabled, validating the checksum of forwarded TCP traffic made
csum_partial() the top entry in the profile on a BCM4716 (74Kc at
480 MHz, no L2, ~80 cycles per DRAM miss): 13-16% of all cycles.

Prefetch the 128 byte block two iterations ahead in the main loop.
Unlike memcpy(), which disables prefetching on DMA_NONCOHERENT
entirely, only prefetch blocks that lie inside the buffer: the 74K does
not need a post-DMA invalidate, so a line prefetched past the end could
belong to a buffer the device is still writing, and the CPU would later
read the stale copy.

On an Asus RT-N16 (BCM4716, bgmac, single TCP stream unless noted,
iperf3 median of 3, A/B in the same boot by toggling the prefetch,
two rounds each):

                       without      with      (Mbit/s)
  local rx / tx        220 / 194    243 / 212
  routed up / down     169 / 140    187 / 154
  routed, 4 streams    65 / 79      69 / 84
  flow offload bidir   253          292

Assisted-by: LLM
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 arch/mips/lib/csum_partial.S | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
index 3d2ff4118d79..f0ec47259ef4 100644
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@@ -190,6 +190,21 @@ EXPORT_SYMBOL(csum_partial)
 	 andi	t2, a1, 0x40
 
 .Lmove_128bytes:
+#ifdef CONFIG_CPU_HAS_PREFETCH
+	/*
+	 * Fetch the block two iterations ahead, but only while it lies
+	 * inside the buffer: on non-coherent systems a line prefetched
+	 * past the end could belong to a buffer the device still owns.
+	 */
+	sltiu	t5, t8, 3
+	bnez	t5, 2f
+	 nop
+	pref	0, 0x100(src)
+	pref	0, 0x120(src)
+	pref	0, 0x140(src)
+	pref	0, 0x160(src)
+2:
+#endif
 	CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4)
 	CSUM_BIGCHUNK(src, 0x20, sum, t0, t1, t3, t4)
 	CSUM_BIGCHUNK(src, 0x40, sum, t0, t1, t3, t4)
-- 
2.56.0


             reply	other threads:[~2026-10-10  6:54 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-10  6:54 Rosen Penev [this message]
2026-10-13  4:28 ` [PATCH] MIPS: lib: prefetch ahead in csum_partial() kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261010065442.23780-1-rosenp@gmail.com \
    --to=rosenp@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=tsbogend@alpha.franken.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.