From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from lists1p.gnu.org (lists1p.gnu.org [209.51.188.17]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id D3359CA9ECF for ; Mon, 12 Oct 2026 02:18:33 +0000 (UTC) Received: from localhost ([::1] helo=lists1p.gnu.org) by lists1p.gnu.org with esmtp (Exim 4.90_1) (envelope-from ) id 1xG5bO-0006cJ-38; Sun, 11 Oct 2026 22:17:22 -0400 Received: from eggs.gnu.org ([2001:470:142:3::10]) by lists1p.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1xG5b1-0006Q0-4L; Sun, 11 Oct 2026 22:16:59 -0400 Received: from mail-japaneastazlp170120005.outbound.protection.outlook.com ([2a01:111:f403:c405::5] helo=TYPPR03CU001.outbound.protection.outlook.com) by eggs.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1xG5aw-0004ly-IL; Sun, 11 Oct 2026 22:16:58 -0400 ARC-Seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=oo4fCrJ7PJJffy4NVBgVmOnV4DqwDQcvGkPw0SsSBXvynAVUBDKnNEJqnUSkdYEfoAQ8O/fzuysMHy/dfLABG/rNclM3PNGwpxgWdKN00lIzjLSUeTHXUjGkhdI6gzSsBchsW3DOIJFQByD7oogyOaXH6ePvnj1UhLnm5rIPz1SJ1RcFAj68lOookIminw7l0Ei5EzicL6aM8wI69wdtD2IJeoxboMcTeFQetqRgIs6h4PNdr5PnRKWuxWXWiAN5QaQq8pTXkR4uDKZh3WJqK8TiVoF9duxSLo1Rp9o/3Ymlk2fzGOMXOGVm7ul3HzKh6+/SVkMUlIjF401eS2XFrg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=XGzIu4F+asHnEfAR/0ifCwy30vHS5+1UyuBX4eF2pg4=; b=S77myAldUkPWqR0oMfzzUiVxFhvrPBGcEaA3hK4lCW2WRhrsKQHUpWDQxgX5wtfNCIVbDx/kRDcwHBA8wTnyveXyGCu+JYEjc0Qs2U6wMUmddw8u3NC8QNKtOmTG/rwlGJd2gxhXbRZSxbKIxpCs9Y1RAkTBQV0M7O9ucxEZCcW4k6eO+j5g7IS4Z9YlWfx8pgVO1LiJlOx3hNyQPBZzEXIpERjwtHwPV2BmvH4FeHy9YH6F5yO5vq+D0HkmQrZKLZnSXLGRbCAI7L/sQYfh7FHm1JIvGTC8+/CJjSXFfOXdvLNPByLd6kCXUU8VNbSoK8ZA4zkT0KFZFcdg72wKnA== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=aspeedtech.com; dmarc=pass action=none header.from=aspeedtech.com; dkim=pass header.d=aspeedtech.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=aspeedtech.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=XGzIu4F+asHnEfAR/0ifCwy30vHS5+1UyuBX4eF2pg4=; b=WMRYzfUxzDjTHtD8xOJ8A6XpXB8pC3UPSMjns3HTdRKYuM4ViqIJn7wYDcckeeZscBjYXHWlIIExUdd5u0N8ccgoRZiyiM1dDPnw4Qy2o5/2V2wsnf3s0grwthdke3kASzhM6lQ19T1aV5aYSq8OocAXtC7eqiVbK7PobGWfsFKoc/RIymegHgG/lPgiZhS3OVRCRGnarINgMaVdRUdXseKoTneV07XF08iARepxhzbuxDzp9HdZYGx+O2nYiezHId+l8s4RfzzWqV6EHPjIGdis8akNiVM8cGUe2AeTVIgjQbJFubknZc8RX77hvzcFOegaARvQNcC9Kjk7Y1pt4A== Received: from SEZPR06MB7362.apcprd06.prod.outlook.com (2603:1096:101:253::10) by SEYPR06MB5398.apcprd06.prod.outlook.com (2603:1096:101:8f::11) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.21.496.19; Mon, 12 Oct 2026 02:16:41 +0000 Received: from SEZPR06MB7362.apcprd06.prod.outlook.com ([fe80::cd2d:35d2:a702:1de6]) by SEZPR06MB7362.apcprd06.prod.outlook.com ([fe80::cd2d:35d2:a702:1de6%4]) with mapi id 15.21.0496.020; Mon, 12 Oct 2026 02:16:41 +0000 From: Jamin Lin To: =?iso-8859-1?Q?C=E9dric_Le_Goater?= , Peter Maydell , Steven Lee , Troy Lee , Kane Chen , Andrew Jeffery , Joel Stanley , "open list:ASPEED BMCs" , "open list:All patches CC here" CC: Jamin Lin , Troy Lee Subject: [PATCH v3 5/8] hw/usb/redirect-server: Implement control transfers Thread-Topic: [PATCH v3 5/8] hw/usb/redirect-server: Implement control transfers Thread-Index: AQHdWe+4E7RfeF/bg06REPE3kuIe3Q== Date: Mon, 12 Oct 2026 02:16:41 +0000 Message-ID: <20261012021634.2006424-6-jamin_lin@aspeedtech.com> References: <20261012021634.2006424-1-jamin_lin@aspeedtech.com> In-Reply-To: <20261012021634.2006424-1-jamin_lin@aspeedtech.com> Accept-Language: zh-TW, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: authentication-results: mx.microsoft.com 1; dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=aspeedtech.com; x-ms-publictraffictype: Email x-ms-traffictypediagnostic: SEZPR06MB7362:EE_|SEYPR06MB5398:EE_ x-ms-office365-filtering-correlation-id: 6d7e4cd1-b12c-4d4c-de14-08df2806dae0 x-ms-exchange-senderadcheck: 1 x-ms-exchange-antispam-relay: 0 x-microsoft-antispam: BCL:0; ARA:13230040|366016|1800799024|376014|23010399003|6133799003|22082099003|18002099003|10067099003|261009223027099003|5023799004|38070700021|56012099006; x-microsoft-antispam-message-info: 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 x-forefront-antispam-report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SEZPR06MB7362.apcprd06.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230040)(366016)(1800799024)(376014)(23010399003)(6133799003)(22082099003)(18002099003)(10067099003)(261009223027099003)(5023799004)(38070700021)(56012099006); DIR:OUT; SFP:1102; x-ms-exchange-antispam-messagedata-chunkcount: 1 x-ms-exchange-antispam-messagedata-0: =?iso-8859-1?Q?P4fNAq5lObLX0H872n8sbymU4Pah/meHUPLyQlovaDzWVkcVmiL9v90rA0?= =?iso-8859-1?Q?gBiWSPMrSCJhpdKgmt7Hz/7DIUuAiZpOLmibBVSk3bmccPaCqmaS+t5fNv?= =?iso-8859-1?Q?RVGNG8xSIYLj20HOuHC2PMTR1UphTzzmEg9CVCIMy/6qSLCgpL7YaHiQ1H?= =?iso-8859-1?Q?8731YGpCM1eBfifqic95DKrejwSOzBYyOjYOjVj5wXalGHMq9Fmol/a7Rj?= =?iso-8859-1?Q?QmXjn5WtzsoS5AFW+KhEF8OOii5WKnmgfSA1F+Iubsi1BqctICiDHbu6nZ?= =?iso-8859-1?Q?MQaWGCratYTLs/tNthDDABde+dfWnhqm3KFhjPG0UCL6mKrVmrxAGRn73/?= =?iso-8859-1?Q?IEjf9Vl2uKgpfs4PLHmjmjA5lafQVcIqwhbU7Ih9YQkyOOMz2pXrPzXltz?= =?iso-8859-1?Q?vVmoAJ0V1uq6fgQOVUhPVNwE3Dnp4bXyL5SKG3zrac6rfSloaZhnMkPJ+L?= =?iso-8859-1?Q?AWVad62BUUz5Q6+02bS3qT/vgwvnDz5+1BaxLTla3ul+5onCnzdLhDjpVN?= =?iso-8859-1?Q?YvnRghG7cg1gzoXSHjlFbvISj32yVf21bJUvA7igLOwV1cq25KCqMwzLez?= =?iso-8859-1?Q?coaFbFAi2oL2m+FrC4mIbGSELY/x2e2i+fw8Um1I0IowEYoMlzxOpGVVFF?= =?iso-8859-1?Q?ek4e4l8Zhr5PqSC8U81/C2cVJXiIjlTaBb/WrkInLK1NsjtfM+OAfVujZe?= =?iso-8859-1?Q?KNVTPITXO3RHufsJ1zVqoytbg+6CujPAIFRj19uMjT1yEsxATisXJAnAUF?= =?iso-8859-1?Q?B220N/2ut7DconyE94J3tApkqX1Ly7CtsCp+Z0UDke844beLkdCA7uU+6R?= =?iso-8859-1?Q?/5sJy0dWeMMT++73r+qPehUMklBS7UWJnxRKBEqgFl6ayWydDeSFR4A3Hu?= =?iso-8859-1?Q?EuLx33mkNyVsbiFe7YPs3ec3eAyBt8P4KAX/SBz1B+eADtNi5KqvLYS3rt?= =?iso-8859-1?Q?ZBAhraMwZABxbM+MFHkaj9vwVNNgqK6dcwFpx5+dxa60CfzEmTAMVn32Sq?= =?iso-8859-1?Q?HLieOXoZghz68MfzDSPKqnOxThftY4fvBWDlcRtzKHAXkSnpCd5d5TxdKI?= =?iso-8859-1?Q?PiU5z/8wcPAEEj5o1842Z6n5YogRg2nDVAVNX4iuTFTfOWyg4XjWgY4RL5?= =?iso-8859-1?Q?rn6UFX9ihwIgqVVh2u0ag0sEIBuzhVYDHkQCQgWuURUzaPKQ4F3qEdnP3G?= =?iso-8859-1?Q?ntkCBXscwRxwfthsE8Nhlarczhsdb2diwe0Qc6IP8buTgS1d4xKrqVKyiU?= =?iso-8859-1?Q?m1+MxcR2F0cX43UT9dkQfXnbHDc2bOI/yHyZ3fAllxh5qf10+7j1CDIvti?= =?iso-8859-1?Q?/xnC6Y+1l1MKNtyCsWOnvQNsY2XG02py3leHuRihaaJ1u109tEZb98XfWh?= =?iso-8859-1?Q?J+NrT8z4yV9yr2bcWocBy4XlHpzDADHBdUBwepT4g3H01b2ccnNd7dV1B+?= =?iso-8859-1?Q?vudGkiidxpEd4ehHTVnTUn11rZ6dhzxPCfPJ3TIXDhYjG3Is2ponfgFk7Z?= =?iso-8859-1?Q?k0w1jh9J9v6yXKoqJ0/+hUZsjG2pRUP3gk7r06l7oeX95rLtqLOehmHRUH?= =?iso-8859-1?Q?/y0BdyyjdeDmXlmeoRJEUfrQjfLghCk80wjd0MsdQgd8XEWjW91javHTRA?= =?iso-8859-1?Q?Ot2r4+lx/8kfgi+1LxZvtf7DiJlCfNVA+QjYzqyPx+G+9uw0LBHEsjUHI4?= =?iso-8859-1?Q?MpNtZlsJz0sTnJ9wxw0Z/nztuwkkfINVuZnQ7B6o83F+z64J6Del0icuGe?= =?iso-8859-1?Q?KWxKvMPJF6o0/+QzohQRNkkXVEwogqeu8PnhX2i5hhJdgnaV2Zok7OdhLu?= =?iso-8859-1?Q?n/wTH3NgLg=3D=3D?= Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 X-Exchange-RoutingPolicyChecked: pW0/kLZWMw1WNlJMd4sPkwrUvPAlEdNZAlybUD0Rgxi5n3c+778nL1I58egPm5j+zE7IDltc7vDRHFMczM6+Btil3A+t5unDmWjYYecYTRWNpppUkhZIoHBcAN+evwDD37NCaFF6u+3BLL8SDr0tMgcGR95WDUL7sNZVUbb2G3H/8fRGEBGHIRfwO8/UlQJhVysyWSVTKmxdAkh3/iosf/9M9enKyacdrCX8r95FnOX/FqufakqHEcQjgfjBRlOoE2SalrPNFvy75vxEemGV9bBFlOwKUyeJ8Jltq5hM7Vwjrh6dRMbFxjk9gyVd7bDCxP7wf/o8pd664wRaWHyaDA== X-OriginatorOrg: aspeedtech.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-AuthSource: SEZPR06MB7362.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-Network-Message-Id: 6d7e4cd1-b12c-4d4c-de14-08df2806dae0 X-MS-Exchange-CrossTenant-originalarrivaltime: 12 Oct 2026 02:16:41.6379 (UTC) X-MS-Exchange-CrossTenant-fromentityheader: Hosted X-MS-Exchange-CrossTenant-id: 43d4aa98-e35b-4575-8939-080e90d5a249 X-MS-Exchange-CrossTenant-mailboxtype: HOSTED X-MS-Exchange-CrossTenant-userprincipalname: OB2ZLokvzrBsLAutlRyjXE47ofxUzk8abKaDB5FWoU7D1tlIw5lFrJ+fZRdnPUxrBFeVZ0xh5XCPIo8YomzhLQHPut5dJlsf5KUxT2XFfkw= X-MS-Exchange-Transport-CrossTenantHeadersStamped: SEYPR06MB5398 Received-SPF: pass client-ip=2a01:111:f403:c405::5; envelope-from=jamin_lin@aspeedtech.com; helo=TYPPR03CU001.outbound.protection.outlook.com X-Spam_score_int: -20 X-Spam_score: -2.1 X-Spam_bar: -- X-Spam_report: (-2.1 / 5.0 requ) BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, DKIM_VALID_EF=-0.1, RCVD_IN_DNSWL_NONE=-0.0001, SPF_HELO_PASS=-0.001, SPF_PASS=-0.001 autolearn=ham autolearn_force=no X-Spam_action: no action X-BeenThere: qemu-arm@nongnu.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: qemu-arm-bounces+qemu-arm=archiver.kernel.org@nongnu.org Sender: qemu-arm-bounces+qemu-arm=archiver.kernel.org@nongnu.org The host sends a control_packet. Turn it into the SETUP, DATA and=0A= STATUS tokens the QEMU USB core wants, run them on the device, and=0A= send the answer back.=0A= =0A= The device may answer later, so we have to remember the packets we=0A= sent. Each one stays on a list until it comes back. We drop the whole=0A= list on a bus reset or a chardev close. When the host asks us to=0A= cancel a packet, we answer it and drop it.=0A= =0A= usbredir has its own messages for set_configuration, get_configuration,=0A= set_alt_setting and get_alt_setting. Each one is a control transfer, so=0A= run it like one and send back the status message.=0A= =0A= usbredir wants an ep_info message. It says what kind each endpoint is:=0A= bulk, interrupt or control. QEMU cannot tell us. It only knows after it=0A= has read the device's descriptors, and it never reads them for a device=0A= that just forwards transfers. So we read them ourselves: the=0A= configuration descriptor passes through us on its way to the host.=0A= =0A= Signed-off-by: Jamin Lin =0A= ---=0A= hw/usb/redirect-server.c | 649 ++++++++++++++++++++++++++++++++++++++-=0A= hw/usb/trace-events | 5 +=0A= 2 files changed, 653 insertions(+), 1 deletion(-)=0A= =0A= diff --git a/hw/usb/redirect-server.c b/hw/usb/redirect-server.c=0A= index 05ee0f3873..22083394ab 100644=0A= --- a/hw/usb/redirect-server.c=0A= +++ b/hw/usb/redirect-server.c=0A= @@ -63,9 +63,11 @@=0A= #include "qom/object.h"=0A= =0A= #include =0A= +#include =0A= =0A= #include "hw/core/qdev-properties.h"=0A= #include "hw/core/qdev-properties-system.h"=0A= +#include "desc.h"=0A= #include "trace.h"=0A= =0A= #define TYPE_USB_REDIR_SERVER "x-usb-redir-server"=0A= @@ -73,6 +75,41 @@ OBJECT_DECLARE_SIMPLE_TYPE(USBRedirServer, USB_REDIR_SER= VER)=0A= =0A= #define USBREDIR_SERVER_VERSION "qemu " TYPE_USB_REDIR_SERVER " " QEMU_VER= SION=0A= =0A= +/*=0A= + * The usbredir ep_info message has one slot per endpoint and direction.= =0A= + * Index 0-15 are the OUT endpoints, 16-31 the IN ones.=0A= + */=0A= +#define USBREDIR_SERVER_MAX_EP 32=0A= +#define USBREDIR_SERVER_EP_IN_BASE 16=0A= +=0A= +#define USBREDIR_SERVER_CTRL_SETUP 0=0A= +#define USBREDIR_SERVER_CTRL_STATUS 1=0A= +=0A= +/* Which message answers the host when a control transfer ends. */=0A= +typedef enum {=0A= + USBREDIR_SERVER_REPLY_CONTROL,=0A= + USBREDIR_SERVER_REPLY_CONFIG,=0A= + USBREDIR_SERVER_REPLY_ALT,=0A= +} USBRedirServerReply;=0A= +=0A= +typedef struct USBRedirServerPkt {=0A= + USBPacket pkt;=0A= +=0A= + /* Saved headers for the usbredir response */=0A= + struct usb_redir_control_packet_header ctrl_hdr;=0A= +=0A= + /*=0A= + * The IOV points here. IN data lands in it, OUT data is copied in.=0A= + * Allocated and freed with the packet; data_size is how big it is.=0A= + */=0A= + uint8_t *data;=0A= + int data_size;=0A= + QTAILQ_ENTRY(USBRedirServerPkt) next;=0A= + USBRedirServerReply reply;=0A= + uint64_t redir_id;=0A= + int type;=0A= +} USBRedirServerPkt;=0A= +=0A= struct USBRedirServer {=0A= SysBusDevice parent_obj;=0A= =0A= @@ -92,8 +129,23 @@ struct USBRedirServer {=0A= guint watch;=0A= bool host_connected;=0A= bool device_announced;=0A= +=0A= + /* In-flight packet tracking */=0A= + QTAILQ_HEAD(, USBRedirServerPkt) inflight;=0A= + uint64_t next_id;=0A= +=0A= + /* Endpoint tables for the usbredir ep_info message. */=0A= + uint8_t ep_type[USBREDIR_SERVER_MAX_EP];=0A= + uint16_t ep_max_packet[USBREDIR_SERVER_MAX_EP];=0A= + uint8_t ep_interval[USBREDIR_SERVER_MAX_EP];=0A= + uint8_t ep_iface[USBREDIR_SERVER_MAX_EP];=0A= };=0A= =0A= +static void usbredir_server_pkt_free(USBRedirServerPkt *rp);=0A= +static void usbredir_server_stop_transfers(USBRedirServer *s);=0A= +static void usbredir_server_send_cancelled(USBRedirServer *s,=0A= + USBRedirServerPkt *rp);=0A= +=0A= /*=0A= * The device is whatever USBDevice the user plugged into our port with=0A= * "-device ,bus=3D.0". NULL until then.=0A= @@ -104,9 +156,98 @@ static USBDevice *usbredir_server_device(USBRedirServe= r *s)=0A= }=0A= =0A= /*=0A= - * Device announcement=0A= + * Descriptor snooping and device announcement=0A= */=0A= =0A= +static void usbredir_server_record_endpoint(USBRedirServer *s,=0A= + const USBDescriptor *desc,=0A= + uint8_t iface)=0A= +{=0A= + uint8_t addr;=0A= + int ep_nr;=0A= + int idx;=0A= +=0A= + if (desc->bLength < 7) {=0A= + return;=0A= + }=0A= +=0A= + addr =3D desc->u.endpoint.bEndpointAddress;=0A= + ep_nr =3D addr & 0x0f;=0A= + idx =3D (addr & USB_DIR_IN) ? ep_nr + USBREDIR_SERVER_EP_IN_BASE : ep_= nr;=0A= + if (ep_nr < 1 || idx >=3D USBREDIR_SERVER_MAX_EP) {=0A= + return;=0A= + }=0A= +=0A= + s->ep_type[idx] =3D desc->u.endpoint.bmAttributes & 0x03;=0A= + s->ep_max_packet[idx] =3D (desc->u.endpoint.wMaxPacketSize_hi << 8) |= =0A= + desc->u.endpoint.wMaxPacketSize_lo;=0A= + s->ep_interval[idx] =3D desc->u.endpoint.bInterval;=0A= + s->ep_iface[idx] =3D iface;=0A= +}=0A= +=0A= +/*=0A= + * A device that only passes transfers through never gets its endpoint=0A= + * types filled in: they stay INVALID and there is nothing to put in=0A= + * ep_info. Take them from the configuration descriptor as it goes past.= =0A= + * Without them the host sees type 255 and refuses to move data.=0A= + */=0A= +static void usbredir_server_snoop_config_desc(USBRedirServer *s,=0A= + const uint8_t *data, int len= )=0A= +{=0A= + const USBDescriptor *desc;=0A= + uint8_t iface =3D 0;=0A= + int i =3D 0;=0A= +=0A= + while (i + 2 <=3D len) {=0A= + desc =3D (const USBDescriptor *)(data + i);=0A= +=0A= + if (desc->bLength < 2 || i + desc->bLength > len) {=0A= + break;=0A= + }=0A= +=0A= + if (desc->bDescriptorType =3D=3D USB_DT_INTERFACE && desc->bLength= >=3D 3) {=0A= + iface =3D desc->u.interface.bInterfaceNumber;=0A= + } else if (desc->bDescriptorType =3D=3D USB_DT_ENDPOINT) {=0A= + usbredir_server_record_endpoint(s, desc, iface);=0A= + }=0A= +=0A= + i +=3D desc->bLength;=0A= + }=0A= +}=0A= +=0A= +static void usbredir_server_send_ep_info(USBRedirServer *s)=0A= +{=0A= + struct usb_redir_ep_info_header ep_info =3D {};=0A= + int i;=0A= +=0A= + for (i =3D 0; i < USBREDIR_SERVER_MAX_EP; i++) {=0A= + ep_info.type[i] =3D s->ep_type[i];=0A= + ep_info.max_packet_size[i] =3D s->ep_max_packet[i];=0A= + ep_info.interface[i] =3D s->ep_iface[i];=0A= + /*=0A= + * bInterval says how often to poll this endpoint. Pass on what=0A= + * the descriptor said, but never 0 for an interrupt or isochronou= s=0A= + * endpoint: redirect.c throws the whole device away when it sees= =0A= + * 0, so send 1 instead.=0A= + */=0A= + ep_info.interval[i] =3D s->ep_interval[i];=0A= + if (ep_info.interval[i] =3D=3D 0 &&=0A= + (s->ep_type[i] =3D=3D USB_ENDPOINT_XFER_INT ||=0A= + s->ep_type[i] =3D=3D USB_ENDPOINT_XFER_ISOC)) {=0A= + ep_info.interval[i] =3D 1;=0A= + }=0A= + if (s->ep_type[i] !=3D USB_ENDPOINT_XFER_INVALID) {=0A= + trace_usbredir_server_ep_info(i, ep_info.type[i],=0A= + ep_info.max_packet_size[i],=0A= + ep_info.interval[i],=0A= + ep_info.interface[i]);=0A= + }=0A= + }=0A= +=0A= + usbredirparser_send_ep_info(s->parser, &ep_info);=0A= + usbredirparser_do_write(s->parser);=0A= +}=0A= +=0A= static uint8_t usbredir_server_speed(USBDevice *device)=0A= {=0A= switch (device->speed) {=0A= @@ -145,6 +286,146 @@ static void usbredir_server_announce_device(USBRedirS= erver *s)=0A= trace_usbredir_server_announce(conn.speed);=0A= usbredirparser_send_device_connect(s->parser, &conn);=0A= usbredirparser_do_write(s->parser);=0A= +=0A= + usbredir_server_send_ep_info(s);=0A= +}=0A= +=0A= +/*=0A= + * Packet completion=0A= + */=0A= +=0A= +static uint8_t usbredir_server_status(int status)=0A= +{=0A= + switch (status) {=0A= + case USB_RET_SUCCESS:=0A= + return usb_redir_success;=0A= + case USB_RET_STALL:=0A= + return usb_redir_stall;=0A= + case USB_RET_BABBLE:=0A= + return usb_redir_babble;=0A= + default:=0A= + return usb_redir_ioerror;=0A= + }=0A= +}=0A= +=0A= +/*=0A= + * The device answered the setup token of an IN control request. What it= =0A= + * wants to send is now in device->data_buf, so run the data and status=0A= + * stages and pass the answer to the host.=0A= + *=0A= + * Each stage reuses rp->pkt, and usb_packet_setup() asserts iov->iov is= =0A= + * not NULL, so call qemu_iovec_init() before every stage.=0A= + */=0A= +static void usbredir_server_ctrl_setup_complete(USBRedirServer *s,=0A= + USBRedirServerPkt *rp)=0A= +{=0A= + struct usb_redir_control_packet_header resp =3D rp->ctrl_hdr;=0A= + struct usb_redir_configuration_status_header cfg =3D {};=0A= + struct usb_redir_alt_setting_status_header alt =3D {=0A= + .interface =3D rp->ctrl_hdr.index,=0A= + };=0A= + USBDevice *device =3D usbredir_server_device(s);=0A= + USBEndpoint *ep_out =3D usb_ep_get(device, USB_TOKEN_OUT, 0);=0A= + USBEndpoint *ep_in =3D usb_ep_get(device, USB_TOKEN_IN, 0);=0A= + uint8_t status =3D usbredir_server_status(rp->pkt.status);=0A= + int actual =3D 0;=0A= +=0A= + if (rp->pkt.status =3D=3D USB_RET_SUCCESS) {=0A= + /* Data stage: the core copies device->data_buf into our buffer. *= /=0A= + qemu_iovec_init(&rp->pkt.iov, 1);=0A= + usb_packet_setup(&rp->pkt, USB_TOKEN_IN, ep_in,=0A= + 0, s->next_id++, false, false);=0A= + usb_packet_addbuf(&rp->pkt, rp->data, rp->data_size);=0A= + usb_handle_packet(device, &rp->pkt);=0A= + actual =3D rp->pkt.actual_length;=0A= + usb_packet_cleanup(&rp->pkt);=0A= +=0A= + /* Status stage: tell the device we got it. Its EP0 goes idle. */= =0A= + qemu_iovec_init(&rp->pkt.iov, 1);=0A= + usb_packet_setup(&rp->pkt, USB_TOKEN_OUT, ep_out,=0A= + 0, s->next_id++, false, false);=0A= + usb_handle_packet(device, &rp->pkt);=0A= + usb_packet_cleanup(&rp->pkt);=0A= +=0A= + if (rp->ctrl_hdr.request =3D=3D USB_REQ_GET_DESCRIPTOR &&=0A= + (rp->ctrl_hdr.value >> 8) =3D=3D USB_DT_CONFIG && actual > 0) = {=0A= + usbredir_server_snoop_config_desc(s, rp->data, actual);=0A= + }=0A= + }=0A= +=0A= + trace_usbredir_server_ctrl_setup_complete(rp->redir_id, status,=0A= + actual);=0A= +=0A= + switch (rp->reply) {=0A= + case USBREDIR_SERVER_REPLY_CONTROL:=0A= + resp.status =3D status;=0A= + resp.length =3D actual;=0A= + usbredirparser_send_control_packet(s->parser, rp->redir_id, &resp,= =0A= + actual > 0 ? rp->data : NULL,= =0A= + actual);=0A= + break;=0A= + case USBREDIR_SERVER_REPLY_CONFIG:=0A= + cfg.status =3D status;=0A= + cfg.configuration =3D actual > 0 ? rp->data[0] : 0;=0A= + usbredirparser_send_configuration_status(s->parser, rp->redir_id,= =0A= + &cfg);=0A= + break;=0A= + case USBREDIR_SERVER_REPLY_ALT:=0A= + alt.status =3D status;=0A= + alt.alt =3D actual > 0 ? rp->data[0] : 0;=0A= + usbredirparser_send_alt_setting_status(s->parser, rp->redir_id,=0A= + &alt);=0A= + break;=0A= + }=0A= + usbredirparser_do_write(s->parser);=0A= +}=0A= +=0A= +/*=0A= + * The status stage of an OUT control request finished, so the device is= =0A= + * done. Tell the host how it went, with whichever message it is waiting= =0A= + * for.=0A= + */=0A= +static void usbredir_server_ctrl_status_complete(USBRedirServer *s,=0A= + USBRedirServerPkt *rp)=0A= +{=0A= + struct usb_redir_control_packet_header resp =3D rp->ctrl_hdr;=0A= + uint8_t status =3D usbredir_server_status(rp->pkt.status);=0A= + struct usb_redir_configuration_status_header cfg =3D {=0A= + .configuration =3D rp->ctrl_hdr.value,=0A= + };=0A= + struct usb_redir_alt_setting_status_header alt =3D {=0A= + .interface =3D rp->ctrl_hdr.index,=0A= + .alt =3D rp->ctrl_hdr.value,=0A= + };=0A= +=0A= + trace_usbredir_server_ctrl_status_complete(rp->redir_id, status);=0A= +=0A= + switch (rp->reply) {=0A= + case USBREDIR_SERVER_REPLY_CONTROL:=0A= + resp.status =3D status;=0A= + resp.length =3D 0;=0A= + usbredirparser_send_control_packet(s->parser, rp->redir_id,=0A= + &resp, NULL, 0);=0A= + break;=0A= + case USBREDIR_SERVER_REPLY_CONFIG:=0A= + cfg.status =3D status;=0A= + usbredirparser_send_configuration_status(s->parser, rp->redir_id,= =0A= + &cfg);=0A= + break;=0A= + case USBREDIR_SERVER_REPLY_ALT:=0A= + alt.status =3D status;=0A= + usbredirparser_send_alt_setting_status(s->parser, rp->redir_id,=0A= + &alt);=0A= + break;=0A= + }=0A= + usbredirparser_do_write(s->parser);=0A= +=0A= + /* The endpoint list changed. Send the new one. */=0A= + if (status =3D=3D usb_redir_success &&=0A= + (rp->ctrl_hdr.request =3D=3D USB_REQ_SET_CONFIGURATION ||=0A= + rp->ctrl_hdr.request =3D=3D USB_REQ_SET_INTERFACE)) {=0A= + usbredir_server_send_ep_info(s);=0A= + }=0A= }=0A= =0A= /*=0A= @@ -165,12 +446,20 @@ static void usbredir_server_port_detach(USBPort *port= )=0A= =0A= trace_usbredir_server_detach(s->device_announced);=0A= =0A= + usbredir_server_stop_transfers(s);=0A= +=0A= if (s->host_connected && s->parser && s->device_announced) {=0A= trace_usbredir_server_disconnect();=0A= usbredirparser_send_device_disconnect(s->parser);=0A= usbredirparser_do_write(s->parser);=0A= }=0A= s->device_announced =3D false;=0A= +=0A= + /* Clear the endpoint tables: they belong to the device that is leavin= g. */=0A= + memset(s->ep_type, USB_ENDPOINT_XFER_INVALID, sizeof(s->ep_type));=0A= + memset(s->ep_max_packet, 0, sizeof(s->ep_max_packet));=0A= + memset(s->ep_interval, 0, sizeof(s->ep_interval));=0A= + memset(s->ep_iface, 0, sizeof(s->ep_iface));=0A= }=0A= =0A= static void usbredir_server_port_child_detach(USBPort *port, USBDevice *ch= ild)=0A= @@ -183,11 +472,42 @@ static void usbredir_server_port_wakeup(USBPort *port= )=0A= /* We do not pass remote wakeup to the host. Nothing to do. */=0A= }=0A= =0A= +/*=0A= + * The core calls this for a packet the device answered with=0A= + * USB_RET_ASYNC. usbredir_server_submit_to_device() calls it for the rest= .=0A= + */=0A= +static void usbredir_server_packet_complete(USBPort *port, USBPacket *p)= =0A= +{=0A= + USBRedirServer *s =3D port->opaque;=0A= + USBRedirServerPkt *rp =3D container_of(p, USBRedirServerPkt, pkt);=0A= + USBDevice *device =3D usbredir_server_device(s);=0A= +=0A= + QTAILQ_REMOVE(&s->inflight, rp, next);=0A= + usb_packet_cleanup(&rp->pkt);=0A= +=0A= + if (!s->parser || !device) {=0A= + usbredir_server_pkt_free(rp);=0A= + return;=0A= + }=0A= +=0A= + switch (rp->type) {=0A= + case USBREDIR_SERVER_CTRL_SETUP:=0A= + usbredir_server_ctrl_setup_complete(s, rp);=0A= + break;=0A= + case USBREDIR_SERVER_CTRL_STATUS:=0A= + usbredir_server_ctrl_status_complete(s, rp);=0A= + break;=0A= + }=0A= +=0A= + usbredir_server_pkt_free(rp);=0A= +}=0A= +=0A= static USBPortOps usbredir_server_port_ops =3D {=0A= .attach =3D usbredir_server_port_attach,=0A= .detach =3D usbredir_server_port_detach,=0A= .child_detach =3D usbredir_server_port_child_detach,=0A= .wakeup =3D usbredir_server_port_wakeup,=0A= + .complete =3D usbredir_server_packet_complete,=0A= };=0A= =0A= /*=0A= @@ -197,6 +517,54 @@ static USBPortOps usbredir_server_port_ops =3D {=0A= static USBBusOps usbredir_server_bus_ops =3D {=0A= };=0A= =0A= +/*=0A= + * Submit a packet to the device. The core only calls our completion=0A= + * callback when the device answers USB_RET_ASYNC, so call it here for=0A= + * the rest.=0A= + */=0A= +static void usbredir_server_submit_to_device(USBRedirServer *s,=0A= + USBRedirServerPkt *rp)=0A= +{=0A= + QTAILQ_INSERT_TAIL(&s->inflight, rp, next);=0A= + usb_handle_packet(usbredir_server_device(s), &rp->pkt);=0A= + if (rp->pkt.status !=3D USB_RET_ASYNC) {=0A= + usbredir_server_packet_complete(&s->port, &rp->pkt);=0A= + }=0A= +}=0A= +=0A= +static USBRedirServerPkt *usbredir_server_pkt_alloc(int size)=0A= +{=0A= + USBRedirServerPkt *rp =3D g_new0(USBRedirServerPkt, 1);=0A= +=0A= + qemu_iovec_init(&rp->pkt.iov, 1);=0A= + rp->data =3D g_malloc0(size);=0A= + rp->data_size =3D size;=0A= + return rp;=0A= +}=0A= +=0A= +static void usbredir_server_pkt_free(USBRedirServerPkt *rp)=0A= +{=0A= + g_free(rp->data);=0A= + g_free(rp);=0A= +}=0A= +=0A= +/*=0A= + * Take @rp off the list and free it. Do not use usb_packet_complete():=0A= + * it calls back into usbredir_server_packet_complete(), which would=0A= + * remove the entry a second time and free it. usb_cancel_packet() only=0A= + * tells the device to let go.=0A= + */=0A= +static void usbredir_server_drop_pkt(USBRedirServer *s,=0A= + USBRedirServerPkt *rp)=0A= +{=0A= + QTAILQ_REMOVE(&s->inflight, rp, next);=0A= + if (usb_packet_is_inflight(&rp->pkt)) {=0A= + usb_cancel_packet(&rp->pkt);=0A= + }=0A= + usb_packet_cleanup(&rp->pkt);=0A= + usbredir_server_pkt_free(rp);=0A= +}=0A= +=0A= /*=0A= * usbredirparser I/O and logging callbacks=0A= */=0A= @@ -312,9 +680,199 @@ static void usbredir_server_reset(void *priv)=0A= USBDevice *device =3D usbredir_server_device(s);=0A= =0A= trace_usbredir_server_bus_reset(device && device->attached);=0A= + if (!device || !device->attached) {=0A= + return;=0A= + }=0A= +=0A= + usbredir_server_stop_transfers(s);=0A= usb_device_reset(device);=0A= }=0A= =0A= +/*=0A= + * Run one control transfer on the device. @reply says which message=0A= + * answers the host when the transfer finishes.=0A= + */=0A= +static void usbredir_server_do_control(USBRedirServer *s, uint64_t id,=0A= + struct usb_redir_control_packet_header *hdr,=0A= + uint8_t *data, int data_len, USBRedirServerReply reply)=0A= +{=0A= + USBDevice *device =3D usbredir_server_device(s);=0A= + USBRedirServerPkt *rp;=0A= + USBEndpoint *ep_out;=0A= + USBEndpoint *ep_in;=0A= + USBEndpoint *ep0;=0A= + bool is_in;=0A= + int size;=0A= +=0A= + if (!s->host_connected || !device || !device->attached) {=0A= + return;=0A= + }=0A= +=0A= + trace_usbredir_server_control(id, hdr->requesttype, hdr->request,=0A= + hdr->value, hdr->index, hdr->length);=0A= +=0A= + is_in =3D !!(hdr->requesttype & USB_DIR_IN);=0A= +=0A= + ep0 =3D usb_ep_get(device, USB_TOKEN_SETUP, 0);=0A= +=0A= + /* Room for the setup bytes and for the data of either direction. */= =0A= + size =3D MAX(hdr->length, data_len);=0A= + size =3D MAX(size, (int)sizeof(device->setup_buf));=0A= +=0A= + rp =3D usbredir_server_pkt_alloc(size);=0A= + rp->redir_id =3D id;=0A= + rp->reply =3D reply;=0A= + rp->ctrl_hdr =3D *hdr;=0A= +=0A= + /*=0A= + * Build the raw 8-byte SETUP packet in rp->data. The IN path=0A= + * overwrites it later with the answer from the device.=0A= + */=0A= + rp->data[0] =3D hdr->requesttype;=0A= + rp->data[1] =3D hdr->request;=0A= + rp->data[2] =3D hdr->value & 0xff;=0A= + rp->data[3] =3D (hdr->value >> 8) & 0xff;=0A= + rp->data[4] =3D hdr->index & 0xff;=0A= + rp->data[5] =3D (hdr->index >> 8) & 0xff;=0A= + rp->data[6] =3D hdr->length & 0xff;=0A= + rp->data[7] =3D (hdr->length >> 8) & 0xff;=0A= +=0A= + if (is_in) {=0A= + /*=0A= + * An IN request. The device starts the work on the setup token=0A= + * and may take its time, so send the token and pick the rest up= =0A= + * in usbredir_server_ctrl_setup_complete().=0A= + */=0A= + rp->type =3D USBREDIR_SERVER_CTRL_SETUP;=0A= + usb_packet_setup(&rp->pkt, USB_TOKEN_SETUP, ep0,=0A= + 0, s->next_id++, false, false);=0A= + usb_packet_addbuf(&rp->pkt, rp->data, sizeof(device->setup_buf));= =0A= + usbredir_server_submit_to_device(s, rp);=0A= + } else {=0A= + /*=0A= + * An OUT request. The device only stores the setup bytes now and= =0A= + * does the work on the status stage, so run the first two stages= =0A= + * here and wait on the last one.=0A= + */=0A= + ep_in =3D usb_ep_get(device, USB_TOKEN_IN, 0);=0A= + ep_out =3D usb_ep_get(device, USB_TOKEN_OUT, 0);=0A= +=0A= + /* Setup stage: hand the device the 8 setup bytes. */=0A= + usb_packet_setup(&rp->pkt, USB_TOKEN_SETUP, ep0,=0A= + 0, s->next_id++, false, false);=0A= + usb_packet_addbuf(&rp->pkt, rp->data, sizeof(device->setup_buf));= =0A= + usb_handle_packet(device, &rp->pkt);=0A= + usb_packet_cleanup(&rp->pkt);=0A= +=0A= + /* Data stage: send the bytes that came with the request. */=0A= + if (data_len > 0) {=0A= + memcpy(rp->data, data, data_len);=0A= + qemu_iovec_init(&rp->pkt.iov, 1);=0A= + usb_packet_setup(&rp->pkt, USB_TOKEN_OUT, ep_out,=0A= + 0, s->next_id++, false, false);=0A= + usb_packet_addbuf(&rp->pkt, rp->data, data_len);=0A= + /* The core copies our bytes into device->data_buf. */=0A= + usb_handle_packet(device, &rp->pkt);=0A= + usb_packet_cleanup(&rp->pkt);=0A= + }=0A= +=0A= + /* Status stage: the device does the work here, so wait for it. */= =0A= + rp->type =3D USBREDIR_SERVER_CTRL_STATUS;=0A= + qemu_iovec_init(&rp->pkt.iov, 1);=0A= + usb_packet_setup(&rp->pkt, USB_TOKEN_IN, ep_in,=0A= + 0, s->next_id++, false, false);=0A= + /* async; the answer comes in usbredir_server_ctrl_status_complete= () */=0A= + usbredir_server_submit_to_device(s, rp);=0A= + }=0A= +}=0A= +=0A= +static void usbredir_server_control_packet(void *priv, uint64_t id,=0A= + struct usb_redir_control_packet_header *hdr,=0A= + uint8_t *data, int data_len)=0A= +{=0A= + usbredir_server_do_control(priv, id, hdr, data, data_len,=0A= + USBREDIR_SERVER_REPLY_CONTROL);=0A= +}=0A= +=0A= +static void usbredir_server_set_configuration(void *priv, uint64_t id,=0A= + struct usb_redir_set_configuration_header *hdr)=0A= +{=0A= + struct usb_redir_control_packet_header ctrl =3D {=0A= + .endpoint =3D 0,=0A= + .request =3D USB_REQ_SET_CONFIGURATION,=0A= + /* Host->Device, Standard, Device */=0A= + .requesttype =3D 0x00,=0A= + .status =3D 0,=0A= + .value =3D hdr->configuration,=0A= + .index =3D 0,=0A= + .length =3D 0,=0A= + };=0A= + USBRedirServer *s =3D priv;=0A= +=0A= + /* The host gets a configuration_status when the device answers. */=0A= + usbredir_server_do_control(s, id, &ctrl, NULL, 0,=0A= + USBREDIR_SERVER_REPLY_CONFIG);=0A= +}=0A= +=0A= +static void usbredir_server_get_configuration(void *priv, uint64_t id)=0A= +{=0A= + struct usb_redir_control_packet_header ctrl =3D {=0A= + .endpoint =3D 0,=0A= + .request =3D USB_REQ_GET_CONFIGURATION,=0A= + /* Device->Host, Standard, Device */=0A= + .requesttype =3D 0x80,=0A= + .status =3D 0,=0A= + .value =3D 0,=0A= + .index =3D 0,=0A= + .length =3D 1,=0A= + };=0A= + USBRedirServer *s =3D priv;=0A= +=0A= + /* The host gets a configuration_status when the device answers. */=0A= + usbredir_server_do_control(s, id, &ctrl, NULL, 0,=0A= + USBREDIR_SERVER_REPLY_CONFIG);=0A= +}=0A= +=0A= +static void usbredir_server_set_alt_setting(void *priv, uint64_t id,=0A= + struct usb_redir_set_alt_setting_header *hdr)=0A= +{=0A= + struct usb_redir_control_packet_header ctrl =3D {=0A= + .endpoint =3D 0,=0A= + .request =3D USB_REQ_SET_INTERFACE,=0A= + /* Host->Device, Standard, Interface */=0A= + .requesttype =3D 0x01,=0A= + .status =3D 0,=0A= + .value =3D hdr->alt,=0A= + .index =3D hdr->interface,=0A= + .length =3D 0,=0A= + };=0A= + USBRedirServer *s =3D priv;=0A= +=0A= + /* The host gets an alt_setting_status when the device answers. */=0A= + usbredir_server_do_control(s, id, &ctrl, NULL, 0,=0A= + USBREDIR_SERVER_REPLY_ALT);=0A= +}=0A= +=0A= +static void usbredir_server_get_alt_setting(void *priv, uint64_t id,=0A= + struct usb_redir_get_alt_setting_header *hdr)=0A= +{=0A= + struct usb_redir_control_packet_header ctrl =3D {=0A= + .endpoint =3D 0,=0A= + .request =3D USB_REQ_GET_INTERFACE,=0A= + /* Device->Host, Standard, Interface */=0A= + .requesttype =3D 0x81,=0A= + .status =3D 0,=0A= + .value =3D 0,=0A= + .index =3D hdr->interface,=0A= + .length =3D 1,=0A= + };=0A= + USBRedirServer *s =3D priv;=0A= +=0A= + /* The host gets an alt_setting_status when the device answers. */=0A= + usbredir_server_do_control(s, id, &ctrl, NULL, 0,=0A= + USBREDIR_SERVER_REPLY_ALT);=0A= +}=0A= +=0A= static void usbredir_server_filter_reject(void *priv)=0A= {=0A= trace_usbredir_server_filter_reject();=0A= @@ -338,6 +896,84 @@ static void usbredir_server_interface_info(void *priv,= =0A= /* The host should not send this to a device. Nothing to do. */=0A= }=0A= =0A= +static void usbredir_server_cancel_data_packet(void *priv, uint64_t id)=0A= +{=0A= + struct usb_redir_control_packet_header resp =3D {=0A= + .endpoint =3D 0,=0A= + .status =3D usb_redir_cancelled,=0A= + .length =3D 0,=0A= + };=0A= + USBRedirServer *s =3D priv;=0A= + USBRedirServerPkt *rp;=0A= +=0A= + /*=0A= + * The host has put this id in its cancelled queue and waits for one= =0A= + * answer carrying it. The device may have answered already, so the=0A= + * request may no longer be on our list. Answer in both cases: the=0A= + * host reuses ids, and a leftover entry would eat a later answer.=0A= + */=0A= + QTAILQ_FOREACH(rp, &s->inflight, next) {=0A= + if (rp->redir_id =3D=3D id) {=0A= + trace_usbredir_server_cancel(id, true);=0A= + usbredir_server_send_cancelled(s, rp);=0A= + usbredir_server_drop_pkt(s, rp);=0A= + return;=0A= + }=0A= + }=0A= +=0A= + /*=0A= + * Already finished, so we no longer know what kind of transfer it=0A= + * was. The host retires the entry on the id alone, and its control=0A= + * handler ignores the endpoint field, so a control packet always=0A= + * works.=0A= + */=0A= + trace_usbredir_server_cancel(id, false);=0A= + usbredirparser_send_control_packet(s->parser, id, &resp, NULL, 0);=0A= + usbredirparser_do_write(s->parser);=0A= +}=0A= +=0A= +/*=0A= + * Cancelled and in-flight packets=0A= + */=0A= +=0A= +/*=0A= + * Every request must get one answer carrying its id, even an aborted one.= =0A= + * A dropped id stays in the host's cancelled queue. The host reuses ids,= =0A= + * so a later answer would be thrown away as a stale one.=0A= + */=0A= +static void usbredir_server_send_cancelled(USBRedirServer *s,=0A= + USBRedirServerPkt *rp)=0A= +{=0A= + struct usb_redir_control_packet_header ctrl;=0A= +=0A= + switch (rp->type) {=0A= + case USBREDIR_SERVER_CTRL_SETUP:=0A= + case USBREDIR_SERVER_CTRL_STATUS:=0A= + ctrl =3D rp->ctrl_hdr;=0A= + ctrl.status =3D usb_redir_cancelled;=0A= + ctrl.length =3D 0;=0A= + usbredirparser_send_control_packet(s->parser, rp->redir_id,=0A= + &ctrl, NULL, 0);=0A= + break;=0A= + default:=0A= + return;=0A= + }=0A= + usbredirparser_do_write(s->parser);=0A= +}=0A= +=0A= +static void usbredir_server_stop_transfers(USBRedirServer *s)=0A= +{=0A= + USBRedirServerPkt *rp;=0A= +=0A= + /*=0A= + * No "cancelled" response here. This runs on a bus reset, a detach or= =0A= + * a closed chardev, and the host has dropped its own queues already.= =0A= + */=0A= + while ((rp =3D QTAILQ_FIRST(&s->inflight)) !=3D NULL) {=0A= + usbredir_server_drop_pkt(s, rp);=0A= + }=0A= +}=0A= +=0A= /*=0A= * Parser setup and teardown=0A= */=0A= @@ -360,13 +996,19 @@ static void usbredir_server_create_parser(USBRedirSer= ver *s)=0A= /* Callbacks for messages the remote host sends to us */=0A= s->parser->hello_func =3D usbredir_server_hello;=0A= s->parser->reset_func =3D usbredir_server_reset;=0A= + s->parser->control_packet_func =3D usbredir_server_control_packet;=0A= + s->parser->set_configuration_func =3D usbredir_server_set_configuratio= n;=0A= =0A= /* The parser calls these directly, so they must not be NULL. */=0A= + s->parser->get_configuration_func =3D usbredir_server_get_configuratio= n;=0A= + s->parser->set_alt_setting_func =3D usbredir_server_set_alt_setting;= =0A= + s->parser->get_alt_setting_func =3D usbredir_server_get_alt_setting;= =0A= s->parser->filter_reject_func =3D usbredir_server_filter_reject;=0A= s->parser->filter_filter_func =3D usbredir_server_filter_filter;=0A= s->parser->device_disconnect_ack_func =3D=0A= usbredir_server_device_disconnect_ack;=0A= s->parser->interface_info_func =3D usbredir_server_interface_info;=0A= + s->parser->cancel_data_packet_func =3D usbredir_server_cancel_data_pac= ket;=0A= =0A= /* Capabilities: 64-bit IDs, connect_device_version, ep_info sizes */= =0A= usbredirparser_caps_set_cap(caps, usb_redir_cap_connect_device_version= );=0A= @@ -398,6 +1040,8 @@ static void usbredir_server_destroy_parser(USBRedirSer= ver *s)=0A= =0A= g_clear_handle_id(&s->watch, g_source_remove);=0A= =0A= + usbredir_server_stop_transfers(s);=0A= +=0A= if (s->parser) {=0A= usbredirparser_destroy(s->parser);=0A= s->parser =3D NULL;=0A= @@ -486,6 +1130,9 @@ static void usbredir_server_realize(DeviceState *dev, = Error **errp)=0A= return;=0A= }=0A= =0A= + QTAILQ_INIT(&s->inflight);=0A= + memset(s->ep_type, USB_ENDPOINT_XFER_INVALID, sizeof(s->ep_type));=0A= +=0A= /* One port: usbredir carries a single device. */=0A= usb_bus_new(&s->bus, sizeof(s->bus), &usbredir_server_bus_ops, dev);= =0A= s->bus.no_auto_hub =3D true;=0A= diff --git a/hw/usb/trace-events b/hw/usb/trace-events=0A= index 2cc6a244b9..25219a018a 100644=0A= --- a/hw/usb/trace-events=0A= +++ b/hw/usb/trace-events=0A= @@ -406,3 +406,8 @@ usbredir_server_announce(uint8_t speed) "device_connect= speed %u"=0A= usbredir_server_disconnect(void) "device_disconnect sent"=0A= usbredir_server_bus_reset(bool attached) "bus reset, attached %d"=0A= usbredir_server_filter_reject(void) "host rejected our device"=0A= +usbredir_server_cancel(uint64_t id, bool found) "id %" PRIu64 " still in f= light %d"=0A= +usbredir_server_ep_info(unsigned idx, uint8_t type, uint16_t mps, uint8_t = interval, uint8_t iface) "ep_info[%u] type %u mps %u interval %u iface %u"= =0A= +usbredir_server_control(uint64_t id, uint8_t requesttype, uint8_t request,= uint16_t value, uint16_t index, uint16_t length) "id %" PRIu64 " type 0x%0= 2x request 0x%02x value 0x%04x index 0x%04x length %u"=0A= +usbredir_server_ctrl_setup_complete(uint64_t id, int status, int actual) "= id %" PRIu64 " status %d actual %d"=0A= +usbredir_server_ctrl_status_complete(uint64_t id, int status) "id %" PRIu6= 4 " status %d"=0A= -- =0A= 2.53.0=0A=