All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alex Elder <elder@riscstar.com>
To: sboyd@kernel.org, bmasney+clk@redhat.com,
	jbrunet+clk@baylibre.com, robh@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org, andersson@kernel.org,
	konradybcio@kernel.org
Cc: abelvesa@kernel.org, kees@kernel.org, gustavoars@kernel.org,
	mohd.anwar@oss.qualcomm.com, lorenzo.bianconi@oss.qualcomm.com,
	danielt@kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-hardening@vger.kernel.org, linux-kernel@vger.kernel.org,
	Daniel Thompson <daniel@riscstar.com>
Subject: [PATCH v3 4/4] arm64: dts: qcom: qcs6490-rb3gen2: add the clock controller
Date: Mon, 12 Oct 2026 10:24:07 -0500	[thread overview]
Message-ID: <20261012152408.3729237-5-elder@riscstar.com> (raw)
In-Reply-To: <20261012152408.3729237-1-elder@riscstar.com>

The clock controller within the TC9564 SoC is accessed via a PCI
endpoint bus through BAR 4 of the first embedded PCIe function.
A syscon node is created to provide access to a range of memory
that is used by the clock controller and shared with other devices.

Co-developed-by: Daniel Thompson <daniel@riscstar.com>
Signed-off-by: Daniel Thompson <daniel@riscstar.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
---
v3: 
- What was formerly described as a "clock" node is now "clock-controller"
- Label for the 25 MHz input clock is added (new in this version)
- The clock-controller node is now a sub-device of the config syscon
- The config syscon is now (also) compatible with "simple-mfd"
- The clock-controller DTS node no longer defines a toshiba,config-syscon
  property, and the config syscon no longer requires a label
- The clock-controller now requires a (parent) clock property, which
  refers to the new 25 MHz clock

 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index b8d290eed2f38..e7601daf1bc5a 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -9,6 +9,7 @@
 #define PM7250B_SID 8
 #define PM7250B_SID1 9
 
+#include <dt-bindings/clock/toshiba,tc9564.h>
 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
 #include <dt-bindings/leds/common.h>
@@ -891,7 +892,7 @@ pcie@0,0 {
 		pinctrl-0 = <&tc9563_resx_n>;
 		pinctrl-names = "default";
 
-		clock-25000000 {
+		tc9564_xo_board: clock-25000000 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
@@ -967,7 +968,7 @@ dev@0,0 {
 				#size-cells = <2>;
 				ranges;	/* This will be updated dynamically */
 
-				pci-ep-bus@4 {
+				pcie_s1b5d0f0_bar4_bus: pci-ep-bus@4 {
 					compatible = "simple-bus";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -995,6 +996,19 @@ pci-ep-bus@4 {
 	};
 };
 
+&pcie_s1b5d0f0_bar4_bus {
+	syscon@0 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x2000>;
+
+		tc9564_clock0: clock-controller {
+			compatible = "toshiba,tc9564-clock";
+			clocks = <&tc9564_xo_board>;
+			#clock-cells = <1>;
+		};
+	};
+};
+
 &pm7325_gpios {
 	kypd_vol_up_n: kypd-vol-up-n-state {
 		pins = "gpio6";
-- 
2.53.0


  parent reply	other threads:[~2026-10-12 15:24 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-12 15:24 [PATCH v3 0/4] clk: introduce TC9564 clock support Alex Elder
2026-10-12 15:24 ` [PATCH v3 1/4] dt-bindings: clock: introduce toshiba,tc9564-clock.yaml Alex Elder
2026-10-12 20:58   ` Conor Dooley
2026-10-12 15:24 ` [PATCH v3 2/4] clk: toshiba: introduce a TC9564 SoC clock driver Alex Elder
2026-10-12 19:02   ` Alex Elder
2026-10-12 19:10   ` Jerome Brunet
2026-10-12 19:59     ` Alex Elder
2026-10-13  7:03       ` Jerome Brunet
2026-10-13 13:37         ` Alex Elder
2026-10-13 14:16           ` Jerome Brunet
2026-10-12 15:24 ` [PATCH v3 3/4] arm64: dts: qcom: define a fixed 25 MHz clock Alex Elder
2026-10-12 16:02   ` Konrad Dybcio
2026-10-12 16:04     ` Alex Elder
2026-10-12 15:24 ` Alex Elder [this message]
2026-10-12 16:02   ` [PATCH v3 4/4] arm64: dts: qcom: qcs6490-rb3gen2: add the clock controller Konrad Dybcio
2026-10-12 16:04     ` Alex Elder
2026-10-12 19:10 ` [PATCH v3 0/4] clk: introduce TC9564 clock support Jerome Brunet
2026-10-12 19:59   ` Alex Elder

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261012152408.3729237-5-elder@riscstar.com \
    --to=elder@riscstar.com \
    --cc=abelvesa@kernel.org \
    --cc=andersson@kernel.org \
    --cc=bmasney+clk@redhat.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel@riscstar.com \
    --cc=danielt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gustavoars@kernel.org \
    --cc=jbrunet+clk@baylibre.com \
    --cc=kees@kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-hardening@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.bianconi@oss.qualcomm.com \
    --cc=mohd.anwar@oss.qualcomm.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.