All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com, andrew+netdev@lunn.ch,
	pavan.chebbi@broadcom.com, andrew.gospodarek@broadcom.com
Subject: [PATCH net-next v3 1/7] bnxt_en: Clear bp->total_irqs in bnxt_init_int_mode() during error
Date: Mon, 12 Oct 2026 15:08:21 -0700	[thread overview]
Message-ID: <20261012220827.340998-2-michael.chan@broadcom.com> (raw)
In-Reply-To: <20261012220827.340998-1-michael.chan@broadcom.com>

During error, bnxt_init_int_mode() will free bp->irq_tbl but
bp->total_irqs retains the old value.  If a subsequent
reinitialization happens, bnxt_reserve_rings() may see that
bp->total_irqs does not match a new irqs_required.  It will then
try to adjust if dynamic MSI-X is supported and call
bnxt_change_msix().  It will then crash when dereferencing the NULL
bp->irq_tbl.

Fix it by clearing bp->total_irqs when freeing bp->irq_tbl.  Dynamic
MSI-X adjustments should only proceed if bp->irq_tbl is valid which
means that MSI-X has been initialized and can be adjusted.

Add a bp->irq_tbl_size to prevent OOB bp->irq_tbl[] array access in
case MSI-X capabilities change during re-init.  For dynamic MSI-X,
allocate the biggest bp->irq_tbl that is not clamped by CP/NQ rings
to allow dynamic MSI-X to grow to the max.

In the AER path, if MSI-X capabilities change, bnxt_reserve_rings()
will initialize MSI-X if BNXT_NEW_RM() is true.  Add a check in
bnxt_io_resume() to skip doing it again later.

Fixes: e68256c8a73c ("bnxt_en: Support dynamic MSIX")
Fixes: c2d20a3814d1 ("bnxt_en: delay pci_alloc_irq_vectors() in the AER path")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
v3:
Added an additional Fixes tag.

v2:
https://lore.kernel.org/netdev/20260928041712.3467803-2-michael.chan@broadcom.com/
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 18 ++++++++++++++----
 drivers/net/ethernet/broadcom/bnxt/bnxt.h |  1 +
 2 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index c1d3fcc7ae84..2bd2c039ce43 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -11510,6 +11510,12 @@ static int bnxt_change_msix(struct bnxt *bp, int total)
 	struct msi_map map;
 	int i;
 
+	if (!bp->irq_tbl)
+		return 0;
+
+	if (total > bp->irq_tbl_size)
+		return bp->total_irqs;
+
 	/* add MSIX to the end if needed */
 	for (i = bp->total_irqs; i < total; i++) {
 		map = pci_msix_alloc_irq_at(bp->pdev, i, NULL);
@@ -11652,12 +11658,13 @@ static int bnxt_init_int_mode(struct bnxt *bp)
 
 	tbl_size = total_vecs;
 	if (pci_msix_can_alloc_dyn(bp->pdev))
-		tbl_size = max;
+		tbl_size = bp->hw_resc.max_irqs;
 	bp->irq_tbl = kzalloc_objs(*bp->irq_tbl, tbl_size);
 	if (!bp->irq_tbl) {
 		rc = -ENOMEM;
 		goto msix_setup_exit;
 	}
+	bp->irq_tbl_size = tbl_size;
 
 	for (i = 0; i < total_vecs; i++)
 		bp->irq_tbl[i].vector = pci_irq_vector(bp->pdev, i);
@@ -11680,6 +11687,8 @@ static int bnxt_init_int_mode(struct bnxt *bp)
 	netdev_err(bp->dev, "bnxt_init_int_mode err: %x\n", rc);
 	kfree(bp->irq_tbl);
 	bp->irq_tbl = NULL;
+	bp->total_irqs = 0;
+	bp->irq_tbl_size = 0;
 	pci_free_irq_vectors(bp->pdev);
 	return rc;
 }
@@ -11690,6 +11699,7 @@ static void bnxt_clear_int_mode(struct bnxt *bp)
 
 	kfree(bp->irq_tbl);
 	bp->irq_tbl = NULL;
+	bp->irq_tbl_size = 0;
 }
 
 int bnxt_reserve_rings(struct bnxt *bp, bool irq_re_init)
@@ -11716,7 +11726,7 @@ int bnxt_reserve_rings(struct bnxt *bp, bool irq_re_init)
 
 	if (irq_re_init && BNXT_NEW_RM(bp) && irqs_required != bp->total_irqs) {
 		irq_change = true;
-		if (!pci_msix_can_alloc_dyn(bp->pdev)) {
+		if (!pci_msix_can_alloc_dyn(bp->pdev) || !bp->irq_tbl) {
 			bnxt_ulp_irq_stop(bp);
 			bnxt_clear_int_mode(bp);
 			irq_cleared = true;
@@ -15080,7 +15090,7 @@ int bnxt_check_rings(struct bnxt *bp, int tx, int rx, bool sh, int tcs,
 			hwr.cp += bnxt_get_ulp_msix_num(bp);
 			hwr.cp = min_t(int, hwr.cp, bnxt_get_max_func_irqs(bp));
 		}
-		if (hwr.cp > bp->total_irqs) {
+		if (bp->irq_tbl && hwr.cp > bp->total_irqs) {
 			int total_msix = bnxt_change_msix(bp, hwr.cp);
 
 			if (total_msix < hwr.cp) {
@@ -17743,7 +17753,7 @@ static void bnxt_io_resume(struct pci_dev *pdev)
 			err = bnxt_open(netdev);
 		} else {
 			err = bnxt_reserve_rings(bp, true);
-			if (!err)
+			if (!err && !bp->irq_tbl)
 				err = bnxt_init_int_mode(bp);
 		}
 	}
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 41d05efd6307..75428a585577 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -2489,6 +2489,7 @@ struct bnxt {
 	 */
 	unsigned long		*ring_affinity_set;
 	int			max_irqs;
+	int			irq_tbl_size;
 	int			total_irqs;
 	int			ulp_num_msix_want;
 	u8			mac_addr[ETH_ALEN];
-- 
2.51.0


  reply	other threads:[~2026-10-12 22:09 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-12 22:08 [PATCH net-next v3 0/7] bnxt_en: Ring accounting fixes Michael Chan
2026-10-12 22:08 ` Michael Chan [this message]
2026-10-12 22:08 ` [PATCH net-next v3 2/7] bnxt_en: Fix bnxt_reinit_features() when irq_re_init is true Michael Chan
2026-10-12 22:08 ` [PATCH net-next v3 3/7] bnxt_en: Refactor RSS table check logic Michael Chan
2026-10-13  0:23   ` Joe Damato
2026-10-12 22:08 ` [PATCH net-next v3 4/7] bnxt_en: Refactor IRQs required logic Michael Chan
2026-10-13  0:25   ` Joe Damato
2026-10-12 22:08 ` [PATCH net-next v3 5/7] bnxt_en: Reinit IRQ when configuring LRO/GRO/HDS Michael Chan
2026-10-12 22:08 ` [PATCH net-next v3 6/7] bnxt_en: Remove support for the old NITRO A0 chip Michael Chan
2026-10-13  0:35   ` Joe Damato
2026-10-12 22:08 ` [PATCH net-next v3 7/7] bnxt_en: Fix ring accounting and validation when rings are constrained Michael Chan
2026-10-13 21:50   ` Gregory Price
2026-10-13 23:01   ` netdev-bot+sashiko
2026-10-12 22:15 ` [PATCH net-next v3 0/7] bnxt_en: Ring accounting fixes netdev-bot+sinfo
2026-10-12 22:52   ` Michael Chan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261012220827.340998-2-michael.chan@broadcom.com \
    --to=michael.chan@broadcom.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew.gospodarek@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=pavan.chebbi@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.