From: Song Liu <song@kernel.org>
To: live-patching@vger.kernel.org, linux-kselftest@vger.kernel.org
Cc: jpoimboe@kernel.org, jikos@kernel.org, mbenes@suse.cz,
pmladek@suse.com, joe.lawrence@redhat.com, shuah@kernel.org,
linux-kernel@vger.kernel.org, Song Liu <song@kernel.org>
Subject: [PATCH 06/11] selftests/livepatch: Test klp-build with patches which cancel out
Date: Fri, 16 Oct 2026 17:24:36 -0700 [thread overview]
Message-ID: <20261017002441.716615-7-song@kernel.org> (raw)
In-Reply-To: <20261017002441.716615-1-song@kernel.org>
Add a test where a patch is followed by its revert. On their own the
two leave nothing to build, so klp-build fails with "no changes
detected" before building anything. With another patch after them,
only that patch's change is left in the combined patch.
Add expect_error() to functions.sh to check for a failure with a given
error message.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Song Liu <song@kernel.org>
---
.../livepatch/test_klp_build/Makefile | 3 +-
.../livepatch/test_klp_build/functions.sh | 12 +++
.../test_klp_build/test-cancelling-patches.sh | 102 ++++++++++++++++++
3 files changed, 116 insertions(+), 1 deletion(-)
create mode 100755 tools/testing/selftests/livepatch/test_klp_build/test-cancelling-patches.sh
diff --git a/tools/testing/selftests/livepatch/test_klp_build/Makefile b/tools/testing/selftests/livepatch/test_klp_build/Makefile
index 536b27767435..b3191b5c1925 100644
--- a/tools/testing/selftests/livepatch/test_klp_build/Makefile
+++ b/tools/testing/selftests/livepatch/test_klp_build/Makefile
@@ -3,7 +3,8 @@
TEST_PROGS := \
test-basic.sh \
test-dependent-patches.sh \
- test-independent-patches.sh
+ test-independent-patches.sh \
+ test-cancelling-patches.sh
TEST_PROGS_EXTENDED := functions.sh
diff --git a/tools/testing/selftests/livepatch/test_klp_build/functions.sh b/tools/testing/selftests/livepatch/test_klp_build/functions.sh
index 4e9d4ccfe300..04538efbee5d 100644
--- a/tools/testing/selftests/livepatch/test_klp_build/functions.sh
+++ b/tools/testing/selftests/livepatch/test_klp_build/functions.sh
@@ -136,3 +136,15 @@ function expect_patch() {
echo "ok"
}
+
+# expect_error(msg) - check that klp-build failed with an error message
+# msg - the message, without the "error: klp-build: " prefix
+function expect_error() {
+ [[ $STATUS -ne 0 ]] || not_ok "klp-build succeeded unexpectedly:" "$WORK_DIR/stdout"
+ [[ -s "$WORK_DIR/stdout" ]] && not_ok "klp-build printed a patch:" "$WORK_DIR/stdout"
+
+ grep -qxF "error: klp-build: $1" "$WORK_DIR/stderr" ||
+ not_ok "klp-build didn't fail with \"$1\":" "$WORK_DIR/stderr"
+
+ echo "ok"
+}
diff --git a/tools/testing/selftests/livepatch/test_klp_build/test-cancelling-patches.sh b/tools/testing/selftests/livepatch/test_klp_build/test-cancelling-patches.sh
new file mode 100755
index 000000000000..270ec8dd892f
--- /dev/null
+++ b/tools/testing/selftests/livepatch/test_klp_build/test-cancelling-patches.sh
@@ -0,0 +1,102 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(dirname "$0")/functions.sh"
+
+setup_tree
+
+add_file drivers/foo/foo.c <<'EOT'
+int foo(int x)
+{
+ if (x < 0)
+ return -1;
+ return x;
+}
+
+int bar(void)
+{
+ return __LINE__;
+}
+
+int baz(int x)
+{
+ if (x > 100)
+ return 100;
+ return x;
+}
+EOT
+
+add_patch 0001-foo.patch <<'EOT'
+--- a/drivers/foo/foo.c
++++ b/drivers/foo/foo.c
+@@ -1,6 +1,8 @@
+ int foo(int x)
+ {
++ if (!x)
++ return 0;
+ if (x < 0)
+ return -1;
+ return x;
+ }
+EOT
+
+add_patch 0002-revert-foo.patch <<'EOT'
+--- a/drivers/foo/foo.c
++++ b/drivers/foo/foo.c
+@@ -1,8 +1,6 @@
+ int foo(int x)
+ {
+- if (!x)
+- return 0;
+ if (x < 0)
+ return -1;
+ return x;
+ }
+EOT
+
+add_patch 0003-baz.patch <<'EOT'
+--- a/drivers/foo/foo.c
++++ b/drivers/foo/foo.c
+@@ -12,7 +12,7 @@ int bar(void)
+
+ int baz(int x)
+ {
+- if (x > 100)
+- return 100;
++ if (x > 1000)
++ return 1000;
+ return x;
+ }
+EOT
+
+# - a patch and its revert leave nothing to build
+
+start_test "patch and its revert"
+
+run_klp_build 0001-foo.patch 0002-revert-foo.patch
+
+expect_error "no changes detected"
+
+# - with another patch after them, only that patch's change is left
+
+start_test "patch and its revert, then another patch"
+
+run_klp_build 0001-foo.patch 0002-revert-foo.patch 0003-baz.patch
+
+expect_patch <<'EOT'
+--- a/drivers/foo/foo.c
++++ b/drivers/foo/foo.c
+@@ -12,7 +12,8 @@ int bar(void)
+
+ int baz(int x)
+ {
+- if (x > 100)
+- return 100;
++ if (x > 1000)
++ return 1000;
++#line 17
+ return x;
+ }
+EOT
+
+exit 0
--
2.53.0-Meta
next prev parent reply other threads:[~2026-10-17 0:25 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-17 0:24 [PATCH 00/11] klp-build: Fix dependent patches, add selftests Song Liu
2026-10-17 0:24 ` [PATCH 01/11] klp-build: Fix dependent patches in a series Song Liu
2026-10-17 0:24 ` [PATCH 02/11] klp-build: Add --patch-only option Song Liu
2026-10-17 0:24 ` [PATCH 03/11] selftests/livepatch: Add tests for klp-build's patch handling Song Liu
2026-10-17 0:24 ` [PATCH 04/11] selftests/livepatch: Test klp-build with dependent patches Song Liu
2026-10-17 0:30 ` sashiko-bot
2026-10-17 0:24 ` [PATCH 05/11] selftests/livepatch: Test klp-build with patches to different functions Song Liu
2026-10-17 0:24 ` Song Liu [this message]
2026-10-17 0:24 ` [PATCH 07/11] selftests/livepatch: Test klp-build with created and deleted files Song Liu
2026-10-17 0:24 ` [PATCH 08/11] selftests/livepatch: Test where klp-build adds #line directives Song Liu
2026-10-17 0:24 ` [PATCH 09/11] selftests/livepatch: Test klp-build's rejection of unsupported files Song Liu
2026-10-17 0:24 ` [PATCH 10/11] selftests/livepatch: Test klp-build with patches which don't apply Song Liu
2026-10-17 0:24 ` [PATCH 11/11] selftests/livepatch: Test klp-build with patches which need offset or fuzz Song Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261017002441.716615-7-song@kernel.org \
--to=song@kernel.org \
--cc=jikos@kernel.org \
--cc=joe.lawrence@redhat.com \
--cc=jpoimboe@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=live-patching@vger.kernel.org \
--cc=mbenes@suse.cz \
--cc=pmladek@suse.com \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.