From: Jinmo Yang <jinmo44.yang@gmail.com>
To: ping.cheng@wacom.com, jason.gerecke@wacom.com, jikos@kernel.org,
bentiss@kernel.org
Cc: dmitry.torokhov@gmail.com, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org,
jinmo44.yang@gmail.com
Subject: [PATCH v2 2/5] HID: wacom: check the input devices in the legacy irq handlers
Date: Sun, 18 Oct 2026 19:46:14 +0900 [thread overview]
Message-ID: <20261018104617.743771-3-jinmo44.yang@gmail.com> (raw)
In-Reply-To: <20261018104617.743771-1-jinmo44.yang@gmail.com>
wacom_penpartner_irq(), wacom_pl_irq(), wacom_ptu_irq(),
wacom_dtu_irq(), wacom_dtus_irq() and wacom_graphire_irq() dereference
pen_input and, for the latter two, pad_input without checking them.
As described in "HID: wacom: check the input device in the shared
report helpers", a partial interface leaves one or two of the three
input devices NULL on a fully successful probe, and wacom_wac_irq()
still dispatches to these handlers. Seven locations fault, each
reproduced on linux-next 20260925 (x86_64, KASAN) from one /dev/uhid
device plus a single UHID_INPUT2 write.
For wacom_dtus_irq() and wacom_graphire_irq(), all hardware served by
these handlers is expected to have both pen and pad on a single
interface (the one exception is GRAPHIRE, which is pen-only). Rather
than scattering checks per branch, validate the expected input devices
at function entry and bail out early if any are missing.
wacom_dtu_irq() gets a check too. Its only dereference is in a
dev_dbg(), so it does not fault with CONFIG_DYNAMIC_DEBUG=n, but it is
unconditional in the source.
Fixes: 2a6cdbdd4cc0 ("HID: wacom: Introduce new 'touch_input' device")
Fixes: 862cf5535c0c ("HID: wacom: Introduce a new WACOM_DEVICETYPE_PAD device_type")
Cc: stable@vger.kernel.org
Signed-off-by: Jinmo Yang <jinmo44.yang@gmail.com>
---
drivers/hid/wacom_wac.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 567b01882eb1..aa08afb3c5ef 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -128,6 +128,12 @@ static int wacom_penpartner_irq(struct wacom_wac *wacom)
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
+ if (!input) {
+ dev_warn_once(&container_of(wacom, struct wacom, wacom_wac)->hdev->dev,
+ "%s: pen_input is NULL\n", __func__);
+ return 0;
+ }
+
switch (data[0]) {
case 1:
if (data[5] & 0x80) {
@@ -174,6 +180,12 @@ static int wacom_pl_irq(struct wacom_wac *wacom)
struct input_dev *input = wacom->pen_input;
int prox, pressure;
+ if (!input) {
+ dev_warn_once(&container_of(wacom, struct wacom, wacom_wac)->hdev->dev,
+ "%s: pen_input is NULL\n", __func__);
+ return 0;
+ }
+
if (data[0] != WACOM_REPORT_PENABLED) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
@@ -233,6 +245,12 @@ static int wacom_ptu_irq(struct wacom_wac *wacom)
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
+ if (!input) {
+ dev_warn_once(&container_of(wacom, struct wacom, wacom_wac)->hdev->dev,
+ "%s: pen_input is NULL\n", __func__);
+ return 0;
+ }
+
if (data[0] != WACOM_REPORT_PENABLED) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
@@ -263,6 +281,12 @@ static int wacom_dtu_irq(struct wacom_wac *wacom)
struct input_dev *input = wacom->pen_input;
int prox = data[1] & 0x20;
+ if (!input) {
+ dev_warn_once(&container_of(wacom, struct wacom, wacom_wac)->hdev->dev,
+ "%s: pen_input is NULL\n", __func__);
+ return 0;
+ }
+
dev_dbg(input->dev.parent,
"%s: received report #%d", __func__, data[0]);
@@ -293,6 +317,13 @@ static int wacom_dtus_irq(struct wacom_wac *wacom)
struct input_dev *input = wacom->pen_input;
unsigned short prox, pressure = 0;
+ if (!input || !wacom->pad_input) {
+ dev_warn_once(&container_of(wacom, struct wacom, wacom_wac)->hdev->dev,
+ "%s: expected pen and pad input devices\n",
+ __func__);
+ return 0;
+ }
+
if (data[0] != WACOM_REPORT_DTUS && data[0] != WACOM_REPORT_DTUSPAD) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d", __func__, data[0]);
@@ -349,6 +380,12 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
int rw = 0;
int retval = 0;
+ if (!input || (!pad_input && features->type != GRAPHIRE)) {
+ dev_warn_once(&container_of(wacom, struct wacom, wacom_wac)->hdev->dev,
+ "%s: missing input device(s)\n", __func__);
+ return 0;
+ }
+
if (features->type == GRAPHIRE_BT) {
if (data[0] != WACOM_REPORT_PENABLED_BT) {
dev_dbg(input->dev.parent,
--
2.53.0
next prev parent reply other threads:[~2026-10-18 10:46 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-23 15:01 [PATCH] HID: wacom: fix NULL pointer dereference in wacom_intuos_pad() Jinmo Yang
2026-05-23 15:06 ` [PATCH v2] " Jinmo Yang
2026-05-23 15:50 ` sashiko-bot
2026-05-29 21:44 ` Dmitry Torokhov
2026-06-10 15:48 ` Jiri Kosina
2026-09-26 18:37 ` Jinmo Yang
2026-09-27 4:11 ` [PATCH 0/5] HID: wacom: check input devices in the report handlers Jinmo Yang
2026-09-27 4:11 ` [PATCH 1/5] HID: wacom: check the input device in the shared report helpers Jinmo Yang
2026-10-17 0:05 ` Jason Gerecke
2026-09-27 4:11 ` [PATCH 2/5] HID: wacom: check the input devices in the legacy irq handlers Jinmo Yang
2026-10-17 0:05 ` Jason Gerecke
2026-09-27 4:11 ` [PATCH 3/5] HID: wacom: check the input device in wacom_intuos_pad() Jinmo Yang
2026-09-27 4:24 ` sashiko-bot
2026-10-17 0:05 ` Jason Gerecke
2026-09-27 4:11 ` [PATCH 4/5] HID: wacom: check the input device in wacom_intuos_bt_irq() Jinmo Yang
2026-10-17 0:05 ` Jason Gerecke
2026-09-27 4:11 ` [PATCH 5/5] HID: wacom: check the input devices in the Bamboo handlers Jinmo Yang
2026-10-17 0:05 ` Jason Gerecke
2026-10-16 9:27 ` [PATCH 0/5] HID: wacom: check input devices in the report handlers Jiri Kosina
2026-10-17 0:05 ` Jason Gerecke
2026-10-18 10:46 ` [PATCH v2 0/5] HID: wacom: guard against NULL input devices on successful probe Jinmo Yang
2026-10-18 10:46 ` [PATCH v2 1/5] HID: wacom: check the input device in the shared report helpers Jinmo Yang
2026-10-18 11:00 ` sashiko-bot
2026-10-18 10:46 ` Jinmo Yang [this message]
2026-10-18 10:53 ` [PATCH v2 2/5] HID: wacom: check the input devices in the legacy irq handlers sashiko-bot
2026-10-18 10:46 ` [PATCH v2 3/5] HID: wacom: add NULL pad_input guard to wacom_intuos_pad() Jinmo Yang
2026-10-18 10:46 ` [PATCH v2 4/5] HID: wacom: add NULL input guards to wacom_intuos_bt_irq() Jinmo Yang
2026-10-18 10:46 ` [PATCH v2 5/5] HID: wacom: add NULL input guards to Bamboo touch/button handlers Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 0/6] HID: wacom: guard against NULL input devices on successful probe Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 1/6] HID: wacom: check the input device in the shared report helpers Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 2/6] HID: wacom: check the input devices in the legacy irq handlers Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 3/6] HID: wacom: add NULL pad_input guard to wacom_intuos_pad() Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 4/6] HID: wacom: add NULL input guards to wacom_intuos_bt_irq() Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 5/6] HID: wacom: add NULL input guards to Bamboo touch/button handlers Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 6/6] HID: wacom: add NULL touch_input guards to remaining touch handlers Jinmo Yang
2026-05-23 15:45 ` [PATCH] HID: wacom: fix NULL pointer dereference in wacom_intuos_pad() sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261018104617.743771-3-jinmo44.yang@gmail.com \
--to=jinmo44.yang@gmail.com \
--cc=bentiss@kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jason.gerecke@wacom.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ping.cheng@wacom.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.