[PATCH] ALSA: hda/realtek: Enable mute LED on HP Pavilion 15-eg2xxx

[Moroz Tymofii <moroztymofii@gmail.com>]

The HP Pavilion 15-eg2xxx (103c:89f6) uses GPIO bit 4
for its speaker mute LED.

Enable the existing ALC287 GPIO LED fixup for this system.

Tested on Linux 7.3-rc7 without an hda_model override.
The F5 LED follows speaker mute/unmute correctly, and
audio playback works normally.

Signed-off-by: Moroz Tymofii <moroztymofii@gmail.com>
---
 sound/hda/codecs/realtek/alc269.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c
index 1623cf926..b3ce4c238 100644
--- a/sound/hda/codecs/realtek/alc269.c
+++ b/sound/hda/codecs/realtek/alc269.c
@@ -7550,6 +7550,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x89d3, "HP EliteBook 645 G9 (MB 89D2)", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
 	SND_PCI_QUIRK(0x103c, 0x89da, "HP Spectre x360 14t-ea100", ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX),
 	SND_PCI_QUIRK(0x103c, 0x89e7, "HP Elite x2 G9", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED),
+	SND_PCI_QUIRK(0x103c, 0x89f6, "HP Pavilion 15-eg2xxx", ALC287_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8a05, "HP Dragonfly Folio G3 2-in-1", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8a06, "HP Dragonfly Folio G3 2-in-1", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8a0e, "HP Pavilion Laptop 15-eh2xxx", ALC287_FIXUP_HP_GPIO_LED),
-- 
2.56.0