From: Val Packett <val@packett.cool>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Luca Weiss <luca.weiss@fairphone.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Val Packett <val@packett.cool>
Subject: [PATCH v3 2/2] usb: typec: fsa4480: Report switch & mux events to codec
Date: Tue, 20 Oct 2026 13:20:31 -0300 [thread overview]
Message-ID: <20261020162101.1527014-3-val@packett.cool> (raw)
In-Reply-To: <20261020162101.1527014-1-val@packett.cool>
From: Luca Weiss <luca.weiss@fairphone.com>
In the Type-C graph, the FSA4480 switch is in between the USB-C connector
and the audio codec, but the audio codec also needs to receive the
switch and mux events from the FSA4480.
Update the driver to get an Type-C mux on the next endpoint and
broadcast the recevied mux & switch state to it.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
[val: enable the SENSE/MIC bits; put the refs in fsa4480_remove]
Signed-off-by: Val Packett <val@packett.cool>
---
drivers/usb/typec/mux/fsa4480.c | 57 +++++++++++++++++++++++++++++----
1 file changed, 50 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c
index bea0c1deec94..3c12d17a25a2 100644
--- a/drivers/usb/typec/mux/fsa4480.c
+++ b/drivers/usb/typec/mux/fsa4480.c
@@ -60,6 +60,9 @@ struct fsa4480 {
struct regmap *regmap;
+ struct typec_mux *codec;
+ struct typec_switch *codec_switch;
+
enum typec_orientation orientation;
unsigned long mode;
unsigned int svid;
@@ -115,7 +118,8 @@ static int fsa4480_set(struct fsa4480 *fsa)
}
} else if (fsa->mode == TYPEC_MODE_AUDIO) {
/* Audio Accessory Mode, setup to auto Jack Detection */
- enable |= FSA4480_ENABLE_USB | FSA4480_ENABLE_AGND;
+ enable |= FSA4480_ENABLE_USB | FSA4480_ENABLE_AGND |
+ FSA4480_ENABLE_SENSE | FSA4480_ENABLE_MIC;
} else
return -EOPNOTSUPP;
@@ -162,7 +166,11 @@ static int fsa4480_switch_set(struct typec_switch_dev *sw,
mutex_unlock(&fsa->lock);
- return ret;
+ if (ret)
+ return ret;
+
+ /* Report orientation to codec after switch has been done */
+ return typec_switch_set(fsa->codec_switch, orientation);
}
static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
@@ -185,7 +193,11 @@ static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *st
mutex_unlock(&fsa->lock);
- return ret;
+ if (ret)
+ return ret;
+
+ /* Report event to codec after switch has been done */
+ return typec_mux_set(fsa->codec, state);
}
enum {
@@ -287,6 +299,19 @@ static int fsa4480_probe(struct i2c_client *client)
FIELD_GET(FSA4480_DEVICE_ID_REV_ID, val),
FIELD_GET(FSA4480_DEVICE_ID_VENDOR_ID, val));
+ /* Get Codec's MUX & Switch devices */
+ fsa->codec = fwnode_typec_mux_get(dev->fwnode);
+ if (IS_ERR(fsa->codec))
+ return dev_err_probe(dev, PTR_ERR(fsa->codec),
+ "failed to acquire codec mode-switch\n");
+
+ fsa->codec_switch = fwnode_typec_switch_get(dev->fwnode);
+ if (IS_ERR(fsa->codec_switch)) {
+ ret = dev_err_probe(dev, PTR_ERR(fsa->codec_switch),
+ "failed to acquire codec orientation-switch\n");
+ goto err_put_mux;
+ }
+
/* Safe mode */
fsa->cur_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
fsa->mode = TYPEC_STATE_SAFE;
@@ -310,8 +335,11 @@ static int fsa4480_probe(struct i2c_client *client)
sw_desc.set = fsa4480_switch_set;
fsa->sw = typec_switch_register(dev, &sw_desc);
- if (IS_ERR(fsa->sw))
- return dev_err_probe(dev, PTR_ERR(fsa->sw), "failed to register typec switch\n");
+ if (IS_ERR(fsa->sw)) {
+ ret = dev_err_probe(dev, PTR_ERR(fsa->sw),
+ "failed to register typec switch\n");
+ goto err_put_switch;
+ }
mux_desc.drvdata = fsa;
mux_desc.fwnode = dev_fwnode(dev);
@@ -319,12 +347,24 @@ static int fsa4480_probe(struct i2c_client *client)
fsa->mux = typec_mux_register(dev, &mux_desc);
if (IS_ERR(fsa->mux)) {
- typec_switch_unregister(fsa->sw);
- return dev_err_probe(dev, PTR_ERR(fsa->mux), "failed to register typec mux\n");
+ ret = dev_err_probe(dev, PTR_ERR(fsa->mux),
+ "failed to register typec mux\n");
+ goto err_unregister_switch;
}
i2c_set_clientdata(client, fsa);
return 0;
+
+err_unregister_switch:
+ typec_switch_unregister(fsa->sw);
+
+err_put_switch:
+ typec_switch_put(fsa->codec_switch);
+
+err_put_mux:
+ typec_mux_put(fsa->codec);
+
+ return ret;
}
static void fsa4480_remove(struct i2c_client *client)
@@ -333,6 +373,9 @@ static void fsa4480_remove(struct i2c_client *client)
typec_mux_unregister(fsa->mux);
typec_switch_unregister(fsa->sw);
+
+ typec_mux_put(fsa->codec);
+ typec_switch_put(fsa->codec_switch);
}
static const struct i2c_device_id fsa4480_table[] = {
--
2.55.0
next prev parent reply other threads:[~2026-10-20 16:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-20 16:20 [PATCH v3 0/2] usb: typec: fsa4480: Support reporting hotplug events to a codec Val Packett
2026-10-20 16:20 ` [PATCH v3 1/2] dt-bindings: usb: fsa4480: Add an optional audio port/endpoint Val Packett
2026-10-20 16:26 ` sashiko-bot
2026-10-20 16:20 ` Val Packett [this message]
2026-10-20 16:33 ` [PATCH v3 2/2] usb: typec: fsa4480: Report switch & mux events to codec sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261020162101.1527014-3-val@packett.cool \
--to=val@packett.cool \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=luca.weiss@fairphone.com \
--cc=neil.armstrong@linaro.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.