[PATCH net-next v2 1/2] net: pse-pd: si3474: fix use-after-free in ancillary client error path

[Carlo Szelinsky <github@szelinsky.de>]

If devm_add_action_or_reset() fails, it has already unregistered the
ancillary I2C client, and the error message then reads that client's
device. It can only fail with -ENOMEM, which is already reported, so
drop the message.

Found by code inspection. Not reproduced.

Fixes: a2317231df4b ("net: pse-pd: Add Si3474 PSE controller driver")
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Carlo Szelinsky <github@szelinsky.de>
---
 drivers/net/pse-pd/si3474.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/pse-pd/si3474.c b/drivers/net/pse-pd/si3474.c
index 1845b9c51cf7..2f4f241a48af 100644
--- a/drivers/net/pse-pd/si3474.c
+++ b/drivers/net/pse-pd/si3474.c
@@ -516,10 +516,8 @@ static int si3474_i2c_probe(struct i2c_client *client)
 		return PTR_ERR(priv->client[1]);
 
 	ret = devm_add_action_or_reset(dev, si3474_ancillary_i2c_remove, priv->client[1]);
-	if (ret < 0) {
-		dev_err(&priv->client[1]->dev, "Cannot register remove callback\n");
+	if (ret)
 		return ret;
-	}
 
 	ret = i2c_smbus_read_byte_data(priv->client[1], VENDOR_IC_ID_REG);
 	if (ret < 0) {
-- 
2.43.0