[PATCH net v4] net: usb: lan78xx: avoid NULL PHY dereference in WoL setup

[Prashant Sengar <prashantsengar25031@gmail.com>]

LAN7801 supports fixed-link configurations without an attached PHY.
However, lan78xx_set_wol() unconditionally passes netdev->phydev
to phy_ethtool_set_wol(), causing a NULL pointer dereference when
a userspace WoL request reaches this path.

Report no WoL capabilities when no PHY is attached, and return
-EOPNOTSUPP from lan78xx_set_wol() before modifying the wakeup
configuration. Keep the existing phylib WoL handling for devices
with an attached PHY.

The issue was reproduced using USB Raw Gadget and dummy_hcd in QEMU.
An ETHTOOL_SWOL ioctl triggered a kernel Oops with the original
driver. With this change, the PHY-less configuration no longer
advertises unsupported WoL operations, avoiding the crash.

Fixes: e110bc825897 ("net: usb: lan78xx: Convert to PHYLINK for improved PHY and MAC management")
Signed-off-by: Prashant Sengar <prashantsengar25031@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
v4:
  - Remove the unrelated blank-line change noted in review.
  - Preserve the existing spacing in lan78xx_get_wol().

v3:
  - Report WoL as unsupported when no PHY is attached.
  - Keep the existing phylib WoL handling for attached PHYs.

v2:
  - Use the phylink API instead of calling phylib directly.

v1: https://lore.kernel.org/netdev/20261018151830.643511-1-prashantsengar25031@gmail.com/
 drivers/net/usb/lan78xx.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 5655941f1478..4f100bec5b3a 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -1764,6 +1764,12 @@ static void lan78xx_get_wol(struct net_device *netdev,
 	u32 buf;
 	struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
 
+	if (!netdev->phydev) {
+		wol->supported = 0;
+		wol->wolopts = 0;
+		return;
+	}
+
 	if (usb_autopm_get_interface(dev->intf) < 0)
 		return;
 
@@ -1795,6 +1801,9 @@ static int lan78xx_set_wol(struct net_device *netdev,
 	if (wol->wolopts & ~WAKE_ALL)
 		return -EINVAL;
 
+	if (!netdev->phydev)
+		return -EOPNOTSUPP;
+
 	ret = usb_autopm_get_interface(dev->intf);
 	if (ret < 0)
 		return ret;
-- 
2.55.0