[PATCH v2 01/12] USB: serial: io_edgeport: fix NULL-deref on early status

[Johan Hovold <johan@kernel.org>]

The driver submits the interrupt-in URB during probe or on first port
open, which on completion may submit the bulk-in URB before all ports
have been opened and their waitqueues have been initialised.

If a (malicious) device sends a status message for a port that has not
yet been opened this may lead to a NULL-pointer dereference in the
bulk-in completion handler when attempting to wakeup blocked tasks.

Move waitqueue initialisation from open() to port_probe() to address
this.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+763813d65c7e18c1b6d5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/6a8818d8.ae6ddae5.3da009.0031.GAE@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/io_edgeport.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index eaa8f00716c8..cdf41e86ba44 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -877,11 +877,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 		}
 	}
 
-	/* initialize our wait queues */
-	init_waitqueue_head(&edge_port->wait_open);
-	init_waitqueue_head(&edge_port->wait_chase);
-	init_waitqueue_head(&edge_port->wait_command);
-
 	/* initialize our port settings */
 	edge_port->txCredits = 0;	/* Can't send any data yet */
 	/* Must always set this bit to enable ints! */
@@ -2965,6 +2960,11 @@ static int edge_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 
 	spin_lock_init(&edge_port->ep_lock);
+
+	init_waitqueue_head(&edge_port->wait_open);
+	init_waitqueue_head(&edge_port->wait_chase);
+	init_waitqueue_head(&edge_port->wait_command);
+
 	edge_port->port = port;
 
 	usb_set_serial_port_data(port, edge_port);
-- 
2.55.0