All of lore.kernel.org
 help / color / mirror / Atom feed
From: Prashant Gupta <prashant.gupta_3@nxp.com>
To: stephen@networkplumber.org, dev@dpdk.org
Cc: Jun Yang <jun.yang@nxp.com>
Subject: [PATCH v4-S3 33/65] event/dpaa2: rework self test for dynamic link and balance check
Date: Fri, 23 Oct 2026 19:13:13 +0530	[thread overview]
Message-ID: <20261023134346.37727-34-prashant.gupta_3@nxp.com> (raw)
In-Reply-To: <20261023134346.37727-1-prashant.gupta_3@nxp.com>

From: Jun Yang <jun.yang@nxp.com>

The eventdev self test linked every queue to every port during device
setup, which prevented individual test cases from exercising their own
queue-to-port topologies and made enqueue/dequeue accounting unreliable.

Rework the self test as follows:

- Move queue-to-port linking out of _eventdev_setup() into each test
  case, so every test establishes the link topology it needs.
- Convert the test mode selector to a bitmask and add an atomic port
  setup path (RTE_DPAA2_EVENT_PORT_CFG_ATOMIC), used by the
  multi-queue/multi-port dequeue test.
- Return the number of dequeued events from consume_events() and assert
  that the dequeued count matches the injected count, verifying balance
  between ingress and egress.
- Retry enqueue until the event is accepted so injection no longer
  silently drops events.
- Propagate meaningful error codes (-ENOMEM, -EINVAL, -ETIMEDOUT,
  -ENODEV, and the underlying ret) instead of a bare -1.

Signed-off-by: Jun Yang <jun.yang@nxp.com>
---
 drivers/event/dpaa2/dpaa2_eventdev_selftest.c | 336 ++++++++++--------
 1 file changed, 197 insertions(+), 139 deletions(-)

diff --git a/drivers/event/dpaa2/dpaa2_eventdev_selftest.c b/drivers/event/dpaa2/dpaa2_eventdev_selftest.c
index 2c688bd194..569621dc39 100644
--- a/drivers/event/dpaa2/dpaa2_eventdev_selftest.c
+++ b/drivers/event/dpaa2/dpaa2_eventdev_selftest.c
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: BSD-3-Clause
- * Copyright 2018-2019 NXP
+ * Copyright 2018-2019, 2026 NXP
  */
 
 #include <rte_stdatomic.h>
@@ -20,6 +20,7 @@
 #include <bus_vdev_driver.h>
 #include <rte_test.h>
 #include <bus_fslmc_driver.h>
+#include <rte_pmd_dpaa2.h>
 
 #include "dpaa2_eventdev.h"
 #include "dpaa2_eventdev_logs.h"
@@ -105,63 +106,64 @@ devconf_set_default_sane_values(struct rte_event_dev_config *dev_conf,
 }
 
 enum {
-	TEST_EVENTDEV_SETUP_DEFAULT,
-	TEST_EVENTDEV_SETUP_PRIORITY,
-	TEST_EVENTDEV_SETUP_DEQUEUE_TIMEOUT,
+	TEST_EVENTDEV_SETUP_DEFAULT = (1 << 0),
+	TEST_EVENTDEV_SETUP_PRIORITY = (1 << 1),
+	TEST_EVENTDEV_SETUP_DEQUEUE_TIMEOUT = (1 << 2),
+	TEST_EVENTDEV_SETUP_ATOMIC = (1 << 3)
 };
 
 static int
 _eventdev_setup(int mode)
 {
-	int i, ret;
+	int ret;
 	struct rte_event_dev_config dev_conf;
 	struct rte_event_dev_info info;
 	const char *pool_name = "evdev_dpaa2_test_pool";
+	uint32_t queue_count, port_count, i;
+	uint8_t step;
+	struct rte_event_port_conf port_conf, *pport_conf;
 
 	/* Create and destroy pool for each test case to make it standalone */
 	eventdev_test_mempool = rte_pktmbuf_pool_create(pool_name,
-					MAX_EVENTS,
+					1024 /*TOTAL_EVENTS*/,
 					0 /*MBUF_CACHE_SIZE*/,
 					0,
-					512, /* Use very small mbufs */
+					2048 + 256 /*512*/, /* Use very small mbufs */
 					rte_socket_id());
 	if (!eventdev_test_mempool) {
 		dpaa2_evdev_err("ERROR creating mempool");
-		return -1;
+		return -ENOMEM;
 	}
 
 	ret = rte_event_dev_info_get(evdev, &info);
 	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
 	RTE_TEST_ASSERT(info.max_num_events >= (int32_t)MAX_EVENTS,
 			"ERROR max_num_events=%d < max_events=%d",
-				info.max_num_events, MAX_EVENTS);
+			info.max_num_events, MAX_EVENTS);
 
 	devconf_set_default_sane_values(&dev_conf, &info);
-	if (mode == TEST_EVENTDEV_SETUP_DEQUEUE_TIMEOUT)
+	if (mode & TEST_EVENTDEV_SETUP_DEQUEUE_TIMEOUT)
 		dev_conf.event_dev_cfg |= RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT;
 
 	ret = rte_event_dev_configure(evdev, &dev_conf);
 	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to configure eventdev");
 
-	uint32_t queue_count;
 	RTE_TEST_ASSERT_SUCCESS(rte_event_dev_attr_get(evdev,
-			    RTE_EVENT_DEV_ATTR_QUEUE_COUNT,
-			    &queue_count), "Queue count get failed");
-
-	if (mode == TEST_EVENTDEV_SETUP_PRIORITY) {
-		if (queue_count > 8) {
-			dpaa2_evdev_err(
-				"test expects the unique priority per queue");
-			return -ENOTSUP;
+		RTE_EVENT_DEV_ATTR_QUEUE_COUNT, &queue_count),
+		"Queue count get failed");
+
+	if (mode & TEST_EVENTDEV_SETUP_PRIORITY) {
+		if (!queue_count) {
+			dpaa2_evdev_err("No queue available");
+			return -EINVAL;
 		}
 
 		/* Configure event queues(0 to n) with
 		 * RTE_EVENT_DEV_PRIORITY_HIGHEST to
 		 * RTE_EVENT_DEV_PRIORITY_LOWEST
 		 */
-		uint8_t step = (RTE_EVENT_DEV_PRIORITY_LOWEST + 1) /
-				queue_count;
-		for (i = 0; i < (int)queue_count; i++) {
+		step = (RTE_EVENT_DEV_PRIORITY_LOWEST + 1) / queue_count;
+		for (i = 0; i < queue_count; i++) {
 			struct rte_event_queue_conf queue_conf;
 
 			ret = rte_event_queue_default_conf_get(evdev, i,
@@ -170,29 +172,33 @@ _eventdev_setup(int mode)
 					i);
 			queue_conf.priority = i * step;
 			ret = rte_event_queue_setup(evdev, i, &queue_conf);
-			RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup queue=%d",
-					i);
+			RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup queue=%d", i);
 		}
-
 	} else {
 		/* Configure event queues with default priority */
-		for (i = 0; i < (int)queue_count; i++) {
+		for (i = 0; i < queue_count; i++) {
 			ret = rte_event_queue_setup(evdev, i, NULL);
-			RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup queue=%d",
-					i);
+			RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup queue=%d", i);
 		}
 	}
+
 	/* Configure event ports */
-	uint32_t port_count;
 	RTE_TEST_ASSERT_SUCCESS(rte_event_dev_attr_get(evdev,
-				RTE_EVENT_DEV_ATTR_PORT_COUNT,
-				&port_count), "Port count get failed");
-	for (i = 0; i < (int)port_count; i++) {
-		ret = rte_event_port_setup(evdev, i, NULL);
+		RTE_EVENT_DEV_ATTR_PORT_COUNT, &port_count),
+		"Port count get failed");
+	for (i = 0; i < port_count; i++) {
+		if (mode & TEST_EVENTDEV_SETUP_ATOMIC) {
+			pport_conf = &port_conf;
+			memset(pport_conf, 0, sizeof(struct rte_event_port_conf));
+			ret = rte_event_port_default_conf_get(evdev, i, pport_conf);
+			RTE_TEST_ASSERT_SUCCESS(ret,
+				"Failed to get default conf of port=%d", i);
+			pport_conf->event_port_cfg = RTE_DPAA2_EVENT_PORT_CFG_ATOMIC;
+		} else {
+			pport_conf = NULL;
+		}
+		ret = rte_event_port_setup(evdev, i, pport_conf);
 		RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup port=%d", i);
-		ret = rte_event_port_link(evdev, i, NULL, NULL, 0);
-		RTE_TEST_ASSERT(ret >= 0, "Failed to link all queues port=%d",
-				i);
 	}
 
 	ret = rte_event_dev_start(evdev);
@@ -207,6 +213,13 @@ eventdev_setup(void)
 	return _eventdev_setup(TEST_EVENTDEV_SETUP_DEFAULT);
 }
 
+static int
+eventdev_atomic_port_setup(void)
+{
+	return _eventdev_setup(TEST_EVENTDEV_SETUP_DEFAULT |
+		TEST_EVENTDEV_SETUP_ATOMIC);
+}
+
 static void
 eventdev_teardown(void)
 {
@@ -216,9 +229,9 @@ eventdev_teardown(void)
 
 static void
 update_event_and_validation_attr(struct rte_mbuf *m, struct rte_event *ev,
-			uint32_t flow_id, uint8_t event_type,
-			uint8_t sub_event_type, uint8_t sched_type,
-			uint8_t queue, uint8_t port, uint8_t seq)
+	uint32_t flow_id, uint8_t event_type,
+	uint8_t sub_event_type, uint8_t sched_type,
+	uint8_t queue, uint8_t port, uint8_t seq)
 {
 	struct event_attr *attr;
 
@@ -249,6 +262,7 @@ inject_events(uint32_t flow_id, uint8_t event_type, uint8_t sub_event_type,
 {
 	struct rte_mbuf *m;
 	unsigned int i;
+	uint16_t eq, err_count;
 
 	for (i = 0; i < events; i++) {
 		struct rte_event ev = {.event = 0, .u64 = 0};
@@ -258,7 +272,16 @@ inject_events(uint32_t flow_id, uint8_t event_type, uint8_t sub_event_type,
 
 		update_event_and_validation_attr(m, &ev, flow_id, event_type,
 			sub_event_type, sched_type, queue, port, i);
-		rte_event_enqueue_burst(evdev, port, &ev, 1);
+		err_count = 0;
+eq_again:
+		eq = rte_event_enqueue_burst(evdev, port, &ev, 1);
+		if (eq != 1) {
+			dpaa2_evdev_err("Failed, eq(%d) != 1", eq);
+			if (err_count > 10)
+				return -EBUSY;
+			err_count++;
+			goto eq_again;
+		}
 	}
 	return 0;
 }
@@ -271,7 +294,7 @@ check_excess_events(uint8_t port)
 	struct rte_event ev;
 
 	/* Check for excess events, try for a few times and exit */
-	for (i = 0; i < 32; i++) {
+	for (i = 0; i < 4; i++) {
 		valid_event = rte_event_dequeue_burst(evdev, port, &ev, 1, 0);
 
 		RTE_TEST_ASSERT_SUCCESS(valid_event,
@@ -285,27 +308,35 @@ static int
 generate_random_events(const unsigned int total_events)
 {
 	struct rte_event_dev_info info;
-	unsigned int i;
+	uint32_t queue_count, i;
+	uint8_t queues[RTE_EVENT_MAX_QUEUES_PER_DEV];
 	int ret;
 
-	uint32_t queue_count;
 	RTE_TEST_ASSERT_SUCCESS(rte_event_dev_attr_get(evdev,
-			    RTE_EVENT_DEV_ATTR_QUEUE_COUNT,
-			    &queue_count), "Queue count get failed");
+		RTE_EVENT_DEV_ATTR_QUEUE_COUNT, &queue_count),
+		"Queue count get failed");
+	if (queue_count > RTE_EVENT_MAX_QUEUES_PER_DEV)
+		queue_count = RTE_EVENT_MAX_QUEUES_PER_DEV;
+	for (i = 0; i < queue_count; i++)
+		queues[i] = i;
+
+	ret = rte_event_port_link(evdev, 0, queues, NULL,
+			queue_count);
+	RTE_TEST_ASSERT(ret >= 0, "Failed to link %d queues port0",
+		queue_count);
 
 	ret = rte_event_dev_info_get(evdev, &info);
 	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
 	for (i = 0; i < total_events; i++) {
-		ret = inject_events(
-			rte_rand() % info.max_event_queue_flows /*flow_id */,
+		ret = inject_events(rte_rand() % info.max_event_queue_flows /*flow_id */,
 			RTE_EVENT_TYPE_CPU /* event_type */,
 			rte_rand() % 256 /* sub_event_type */,
 			rte_rand() % (RTE_SCHED_TYPE_PARALLEL + 1),
-			rte_rand() % queue_count /* queue */,
+			rte_rand() % queue_count,
 			0 /* port */,
 			1 /* events */);
 		if (ret)
-			return -1;
+			return ret;
 	}
 	return ret;
 }
@@ -339,7 +370,8 @@ typedef int (*validate_event_cb)(uint32_t index, uint8_t port,
 				 struct rte_event *ev);
 
 static int
-consume_events(uint8_t port, const uint32_t total_events, validate_event_cb fn)
+consume_events(uint8_t port, const uint32_t total_events,
+	uint32_t *dq_events, validate_event_cb fn)
 {
 	int ret;
 	uint16_t valid_event;
@@ -349,7 +381,7 @@ consume_events(uint8_t port, const uint32_t total_events, validate_event_cb fn)
 	while (1) {
 		if (++forward_progress_cnt > UINT16_MAX) {
 			dpaa2_evdev_err("Detected deadlock");
-			return -1;
+			return -ETIMEDOUT;
 		}
 
 		valid_event = rte_event_dequeue_burst(evdev, port, &ev, 1, 0);
@@ -359,9 +391,9 @@ consume_events(uint8_t port, const uint32_t total_events, validate_event_cb fn)
 		forward_progress_cnt = 0;
 		ret = validate_event(&ev);
 		if (ret)
-			return -1;
+			return ret;
 
-		if (fn != NULL) {
+		if (fn) {
 			ret = fn(index, port, &ev);
 			RTE_TEST_ASSERT_SUCCESS(ret,
 				"Failed to validate test specific event");
@@ -374,6 +406,9 @@ consume_events(uint8_t port, const uint32_t total_events, validate_event_cb fn)
 			break;
 	}
 
+	if (dq_events)
+		*dq_events = events;
+
 	return check_excess_events(port);
 }
 
@@ -394,18 +429,28 @@ static int
 test_simple_enqdeq(uint8_t sched_type)
 {
 	int ret;
+	uint8_t queue = 0;
+	uint32_t total_dq = 0;
+
+	ret = rte_event_port_link(evdev, 0, &queue, NULL, 1);
+	RTE_TEST_ASSERT(ret >= 0, "Failed to link 1 queues port0");
 
 	ret = inject_events(0 /*flow_id */,
-				RTE_EVENT_TYPE_CPU /* event_type */,
-				0 /* sub_event_type */,
-				sched_type,
-				0 /* queue */,
-				0 /* port */,
-				MAX_EVENTS);
+			RTE_EVENT_TYPE_CPU /* event_type */,
+			0 /* sub_event_type */,
+			sched_type,
+			0 /* queue */,
+			0 /* port */,
+			MAX_EVENTS);
 	if (ret)
-		return -1;
+		return ret;
 
-	return consume_events(0 /* port */, MAX_EVENTS,	validate_simple_enqdeq);
+	ret = consume_events(0/* port */, MAX_EVENTS,	&total_dq, validate_simple_enqdeq);
+	RTE_TEST_ASSERT(!ret, "Failed to consume event from port0");
+	RTE_TEST_ASSERT(total_dq == MAX_EVENTS,
+		"total_dq(%d) != MAX_EVENTS(8)", total_dq);
+
+	return ret;
 }
 
 static int
@@ -429,12 +474,18 @@ static int
 test_multi_queue_enq_single_port_deq(void)
 {
 	int ret;
+	uint32_t dq_events;
 
 	ret = generate_random_events(MAX_EVENTS);
 	if (ret)
-		return -1;
+		return ret;
+
+	ret = consume_events(0/* port */, MAX_EVENTS, &dq_events, NULL);
+	RTE_TEST_ASSERT(!ret, "Failed to consume event from port0");
+	RTE_TEST_ASSERT(dq_events == MAX_EVENTS,
+		"dq_events(%d) != MAX_EVENTS(8)", dq_events);
 
-	return consume_events(0 /* port */, MAX_EVENTS, NULL);
+	return ret;
 }
 
 static int
@@ -479,8 +530,7 @@ wait_workers_to_join(int lcore, const __rte_atomic uint32_t *count)
 			print_cycles = new_cycles;
 		}
 		if (new_cycles - cycles > rte_get_timer_hz() * 10) {
-			dpaa2_evdev_info(
-				"%s: No schedules for seconds, deadlock (%u)",
+			dpaa2_evdev_info("%s: No schedules for seconds, deadlock (%d)",
 				__func__,
 				rte_atomic_load_explicit(count, rte_memory_order_relaxed));
 			rte_event_dev_dump(evdev, stdout);
@@ -495,8 +545,8 @@ wait_workers_to_join(int lcore, const __rte_atomic uint32_t *count)
 
 static int
 launch_workers_and_wait(int (*main_worker)(void *),
-			int (*workers)(void *), uint32_t total_events,
-			uint8_t nb_workers, uint8_t sched_type)
+	int (*workers)(void *), uint32_t total_events,
+	uint8_t nb_workers, uint8_t sched_type)
 {
 	uint8_t port = 0;
 	int w_lcore;
@@ -513,13 +563,13 @@ launch_workers_and_wait(int (*main_worker)(void *),
 
 	param = malloc(sizeof(struct test_core_param) * nb_workers);
 	if (!param)
-		return -1;
+		return -ENOMEM;
 
 	ret = rte_event_dequeue_timeout_ticks(evdev,
 		rte_rand() % 10000000/* 10ms */, &dequeue_tmo_ticks);
 	if (ret) {
 		free(param);
-		return -1;
+		return ret;
 	}
 
 	param[0].total_events = &atomic_total_events;
@@ -563,22 +613,22 @@ test_multi_queue_enq_multi_port_deq(void)
 
 	ret = generate_random_events(total_events);
 	if (ret)
-		return -1;
+		return ret;
 
 	RTE_TEST_ASSERT_SUCCESS(rte_event_dev_attr_get(evdev,
-				RTE_EVENT_DEV_ATTR_PORT_COUNT,
-				&nr_ports), "Port count get failed");
+		RTE_EVENT_DEV_ATTR_PORT_COUNT, &nr_ports),
+		"Port count get failed");
 	nr_ports = RTE_MIN(nr_ports, rte_lcore_count() - 1);
 
 	if (!nr_ports) {
 		dpaa2_evdev_err("%s: Not enough ports=%d or workers=%d",
-				__func__, nr_ports, rte_lcore_count() - 1);
-		return 0;
+			__func__, nr_ports, rte_lcore_count() - 1);
+		return -EINVAL;
 	}
 
 	return launch_workers_and_wait(worker_multi_port_fn,
-					worker_multi_port_fn, total_events,
-					nr_ports, 0xff /* invalid */);
+				worker_multi_port_fn, total_events,
+				nr_ports, 0xff /* invalid */);
 }
 
 static
@@ -589,7 +639,6 @@ void flush(uint8_t dev_id, struct rte_event event, void *arg)
 	RTE_SET_USED(dev_id);
 	if (event.event_type == RTE_EVENT_TYPE_CPU)
 		*count = *count + 1;
-
 }
 
 static int
@@ -610,8 +659,8 @@ test_dev_stop_flush(void)
 	if (ret)
 		return -3;
 	RTE_TEST_ASSERT_EQUAL(total_events, count,
-				"count mismatch total_events=%d count=%d",
-				total_events, count);
+		"count mismatch total_events=%d count=%d",
+		total_events, count);
 	return 0;
 }
 
@@ -621,8 +670,8 @@ validate_queue_to_port_single_link(uint32_t index, uint8_t port,
 {
 	RTE_SET_USED(index);
 	RTE_TEST_ASSERT_EQUAL(port, ev->queue_id,
-				"queue mismatch enq=%d deq =%d",
-				port, ev->queue_id);
+		"queue mismatch enq=%d deq =%d",
+		port, ev->queue_id);
 	return 0;
 }
 
@@ -633,39 +682,32 @@ validate_queue_to_port_single_link(uint32_t index, uint8_t port,
 static int
 test_queue_to_port_single_link(void)
 {
-	int i, nr_links, ret;
-
-	uint32_t port_count;
+	int ret;
+	uint8_t queue;
+	uint32_t port_count, queue_count, nr_links, total_events, i;
+	uint32_t dq_events = 0, total_dqs = 0;
 
 	RTE_TEST_ASSERT_SUCCESS(rte_event_dev_attr_get(evdev,
-				RTE_EVENT_DEV_ATTR_PORT_COUNT,
-				&port_count), "Port count get failed");
-
-	/* Unlink all connections that created in eventdev_setup */
-	for (i = 0; i < (int)port_count; i++) {
-		ret = rte_event_port_unlink(evdev, i, NULL, 0);
-		RTE_TEST_ASSERT(ret >= 0,
-				"Failed to unlink all queues port=%d", i);
-	}
-
-	uint32_t queue_count;
+		RTE_EVENT_DEV_ATTR_PORT_COUNT, &port_count),
+		"Port count get failed");
 
 	RTE_TEST_ASSERT_SUCCESS(rte_event_dev_attr_get(evdev,
-			    RTE_EVENT_DEV_ATTR_QUEUE_COUNT,
-			    &queue_count), "Queue count get failed");
+		RTE_EVENT_DEV_ATTR_QUEUE_COUNT, &queue_count),
+		"Queue count get failed");
 
 	nr_links = RTE_MIN(port_count, queue_count);
-	const unsigned int total_events = MAX_EVENTS / nr_links;
+	total_events = MAX_EVENTS / nr_links;
 
-	/* Link queue x to port x and inject events to queue x through port x */
 	for (i = 0; i < nr_links; i++) {
-		uint8_t queue = (uint8_t)i;
-
+		queue = i;
 		ret = rte_event_port_link(evdev, i, &queue, NULL, 1);
 		RTE_TEST_ASSERT(ret == 1, "Failed to link queue to port %d", i);
+	}
 
-		ret = inject_events(
-			0x100 /*flow_id */,
+	/* Link queue x to port x and inject events to queue x through port x */
+	for (i = 0; i < nr_links; i++) {
+		queue = i;
+		ret = inject_events(0x100 /*flow_id */,
 			RTE_EVENT_TYPE_CPU /* event_type */,
 			rte_rand() % 256 /* sub_event_type */,
 			rte_rand() % (RTE_SCHED_TYPE_PARALLEL + 1),
@@ -673,16 +715,21 @@ test_queue_to_port_single_link(void)
 			i /* port */,
 			total_events /* events */);
 		if (ret)
-			return -1;
+			return ret;
 	}
 
 	/* Verify the events generated from correct queue */
 	for (i = 0; i < nr_links; i++) {
 		ret = consume_events(i /* port */, total_events,
+				&dq_events,
 				validate_queue_to_port_single_link);
 		if (ret)
-			return -1;
+			return ret;
+		total_dqs += dq_events;
 	}
+	RTE_TEST_ASSERT(total_dqs == total_events * nr_links,
+		"total_dqs(%d) != total_events(%d) * nr_links(%d)",
+		total_dqs, total_events, nr_links);
 
 	return 0;
 }
@@ -693,8 +740,8 @@ validate_queue_to_port_multi_link(uint32_t index, uint8_t port,
 {
 	RTE_SET_USED(index);
 	RTE_TEST_ASSERT_EQUAL(port, (ev->queue_id & 0x1),
-				"queue mismatch enq=%d deq =%d",
-				port, ev->queue_id);
+		"queue mismatch enq=%d deq =%d",
+		port, ev->queue_id);
 	return 0;
 }
 
@@ -705,46 +752,48 @@ validate_queue_to_port_multi_link(uint32_t index, uint8_t port,
 static int
 test_queue_to_port_multi_link(void)
 {
-	int ret, port0_events = 0, port1_events = 0;
+	int ret;
 	uint8_t queue, port;
-	uint32_t nr_queues = 0;
-	uint32_t nr_ports = 0;
+	uint32_t nr_queues = 0, total_events, even_idx = 0, odd_idx = 0;
+	uint32_t nr_ports = 0, dq_events, port0_events = 0, port1_events = 0;
+	uint8_t even_queues[RTE_EVENT_MAX_QUEUES_PER_DEV];
+	uint8_t odd_queues[RTE_EVENT_MAX_QUEUES_PER_DEV];
 
 	RTE_TEST_ASSERT_SUCCESS(rte_event_dev_attr_get(evdev,
-			    RTE_EVENT_DEV_ATTR_QUEUE_COUNT,
-			    &nr_queues), "Queue count get failed");
-
+		RTE_EVENT_DEV_ATTR_QUEUE_COUNT, &nr_queues),
+		"Queue count get failed");
 	RTE_TEST_ASSERT_SUCCESS(rte_event_dev_attr_get(evdev,
-				RTE_EVENT_DEV_ATTR_QUEUE_COUNT,
-				&nr_queues), "Queue count get failed");
-	RTE_TEST_ASSERT_SUCCESS(rte_event_dev_attr_get(evdev,
-				RTE_EVENT_DEV_ATTR_PORT_COUNT,
-				&nr_ports), "Port count get failed");
+		RTE_EVENT_DEV_ATTR_PORT_COUNT, &nr_ports),
+		"Port count get failed");
 
 	if (nr_ports < 2) {
 		dpaa2_evdev_err("%s: Not enough ports to test ports=%d",
-				__func__, nr_ports);
-		return 0;
+			__func__, nr_ports);
+		return -ENODEV;
 	}
 
-	/* Unlink all connections that created in eventdev_setup */
-	for (port = 0; port < nr_ports; port++) {
-		ret = rte_event_port_unlink(evdev, port, NULL, 0);
-		RTE_TEST_ASSERT(ret >= 0, "Failed to unlink all queues port=%d",
-					port);
+	for (queue = 0; queue < nr_queues; queue++) {
+		if (queue & 0x1) {
+			odd_queues[odd_idx] = queue;
+			odd_idx++;
+		} else {
+			even_queues[even_idx] = queue;
+			even_idx++;
+		}
 	}
 
-	const unsigned int total_events = MAX_EVENTS / nr_queues;
+	ret = rte_event_port_link(evdev, 0, even_queues, NULL, even_idx);
+	RTE_TEST_ASSERT(ret >= 0, "Failed to link queues port0");
+	ret = rte_event_port_link(evdev, 1, odd_queues, NULL, odd_idx);
+	RTE_TEST_ASSERT(ret >= 0, "Failed to link queues port1");
+
+	total_events = MAX_EVENTS / nr_queues;
 
 	/* Link all even number of queues to port0 and odd numbers to port 1*/
 	for (queue = 0; queue < nr_queues; queue++) {
 		port = queue & 0x1;
-		ret = rte_event_port_link(evdev, port, &queue, NULL, 1);
-		RTE_TEST_ASSERT(ret == 1, "Failed to link queue=%d to port=%d",
-					queue, port);
 
-		ret = inject_events(
-			0x100 /*flow_id */,
+		ret = inject_events(0x100 /*flow_id */,
 			RTE_EVENT_TYPE_CPU /* event_type */,
 			rte_rand() % 256 /* sub_event_type */,
 			rte_rand() % (RTE_SCHED_TYPE_PARALLEL + 1),
@@ -752,7 +801,7 @@ test_queue_to_port_multi_link(void)
 			port /* port */,
 			total_events /* events */);
 		if (ret)
-			return -1;
+			return ret;
 
 		if (port == 0)
 			port0_events += total_events;
@@ -760,14 +809,23 @@ test_queue_to_port_multi_link(void)
 			port1_events += total_events;
 	}
 
-	ret = consume_events(0 /* port */, port0_events,
-				validate_queue_to_port_multi_link);
+	dq_events = 0;
+	ret = consume_events(0/* port */, port0_events, &dq_events,
+			validate_queue_to_port_multi_link);
 	if (ret)
-		return -1;
-	ret = consume_events(1 /* port */, port1_events,
-				validate_queue_to_port_multi_link);
+		return ret;
+	RTE_TEST_ASSERT(dq_events == port0_events,
+		"dq_events(%d) != port0_events(%d)",
+		dq_events, port0_events);
+
+	dq_events = 0;
+	ret = consume_events(1/* port */, port1_events, &dq_events,
+			validate_queue_to_port_multi_link);
 	if (ret)
-		return -1;
+		return ret;
+	RTE_TEST_ASSERT(dq_events == port1_events,
+		"dq_events(%d) != port1_events(%d)",
+		dq_events, port0_events);
 
 	return 0;
 }
@@ -805,7 +863,7 @@ test_eventdev_dpaa2(void)
 			test_multi_queue_enq_single_port_deq);
 	DPAA2_TEST_RUN(eventdev_setup, eventdev_teardown,
 			test_dev_stop_flush);
-	DPAA2_TEST_RUN(eventdev_setup, eventdev_teardown,
+	DPAA2_TEST_RUN(eventdev_atomic_port_setup, eventdev_teardown,
 			test_multi_queue_enq_multi_port_deq);
 	DPAA2_TEST_RUN(eventdev_setup, eventdev_teardown,
 			test_queue_to_port_single_link);
-- 
2.43.0


  parent reply	other threads:[~2026-10-23 13:47 UTC|newest]

Thread overview: 356+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-03 13:53 [PATCH 00/45] net/dpaa2: features and fixes for NXP DPAA2 drivers Prashant Gupta
2026-09-03 13:53 ` [PATCH 01/45] crypto/dpaa2_sec: fix buffer overflow in GCM decrypt Prashant Gupta
2026-09-03 13:53 ` [PATCH 02/45] crypto/dpaa2_sec: fix FLE pool leak on sec FD build failure Prashant Gupta
2026-09-03 13:53 ` [PATCH 03/45] crypto/dpaa2_sec: support AES-GMAC Prashant Gupta
2026-09-03 13:53 ` [PATCH 04/45] crypto/dpaa2_sec: increase ivsize range for AES-CTR Prashant Gupta
2026-09-03 13:53 ` [PATCH 05/45] crypto/dpaa2_sec: add missing ECN capability Prashant Gupta
2026-09-03 13:53 ` [PATCH 06/45] crypto/dpaa2_sec: add support for env variables Prashant Gupta
2026-09-03 13:53 ` [PATCH 07/45] drivers: fix double free of dpaa2 device on uninit Prashant Gupta
2026-09-03 14:05   ` David Marchand
2026-09-03 13:53 ` [PATCH 08/45] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-09-03 13:53 ` [PATCH 09/45] dma/dpaa2: fix array-bounds warning in dequeue path Prashant Gupta
2026-09-03 13:53 ` [PATCH 10/45] bus/fslmc: defer bus initialization to probe Prashant Gupta
2026-09-03 13:53 ` [PATCH 11/45] dma/dpaa2: validate IOVA in pre-populate helpers Prashant Gupta
2026-09-03 13:53 ` [PATCH 12/45] dma/dpaa2: optimize context index ring enqueue Prashant Gupta
2026-09-03 13:53 ` [PATCH 13/45] drivers: add dpaa2 DMA bypass memory translation option Prashant Gupta
2026-09-03 13:53 ` [PATCH 14/45] mempool/dpaa2: support ops index from primary in secondary Prashant Gupta
2026-09-03 13:53 ` [PATCH 15/45] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-09-03 13:53 ` [PATCH 16/45] drivers: optimize dpaa2 Tx queue and channel mapping Prashant Gupta
2026-09-03 13:53 ` [PATCH 17/45] net/dpaa2: support larger burst size Prashant Gupta
2026-09-03 13:53 ` [PATCH 18/45] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-09-03 13:53 ` [PATCH 19/45] net/dpaa2: support meter and policing Prashant Gupta
2026-09-03 13:53 ` [PATCH 20/45] net/dpaa2: support flow drop action Prashant Gupta
2026-09-03 13:53 ` [PATCH 21/45] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-09-03 13:53 ` [PATCH 22/45] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-09-03 13:53 ` [PATCH 23/45] net/dpaa2: add minimum key size support Prashant Gupta
2026-09-03 13:53 ` [PATCH 24/45] net/dpaa2: restructure dpaa2 parser processing Prashant Gupta
2026-09-03 13:53 ` [PATCH 25/45] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-09-03 13:53 ` [PATCH 26/45] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-09-03 13:53 ` [PATCH 27/45] drivers: refresh dpaa2 MC and SoC version info Prashant Gupta
2026-09-03 13:53 ` [PATCH 28/45] drivers: identify dpaa2 soft parser protocol Prashant Gupta
2026-09-03 13:53 ` [PATCH 29/45] drivers: assign dpaa2 Rx CGID per traffic class Prashant Gupta
2026-09-03 13:53 ` [PATCH 30/45] drivers: inherit dpaa2 rxq config for event queue Prashant Gupta
2026-09-03 13:53 ` [PATCH 31/45] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-09-03 13:53 ` [PATCH 32/45] drivers: rework dpaa2 Tx confirmation Prashant Gupta
2026-09-03 13:53 ` [PATCH 33/45] net/dpaa2: ptp enhancements Prashant Gupta
2026-09-03 13:53 ` [PATCH 34/45] net/dpaa2: remove unused soft parser Tx code Prashant Gupta
2026-09-03 13:53 ` [PATCH 35/45] net/dpaa2: update MC dpni QoS and flow steering API Prashant Gupta
2026-09-03 13:53 ` [PATCH 36/45] net/dpaa2: enhance xstat implementation Prashant Gupta
2026-09-03 13:53 ` [PATCH 37/45] net/dpaa2: rework flow engine Prashant Gupta
2026-09-03 13:53 ` [PATCH 38/45] net/dpaa2: support Rx mempool per traffic class Prashant Gupta
2026-09-03 13:53 ` [PATCH 39/45] drivers: consume dpaa2 DQRR entries in batches Prashant Gupta
2026-09-03 13:53 ` [PATCH 40/45] drivers: resolve dpaa2 endpoint in the net driver Prashant Gupta
2026-09-03 13:53 ` [PATCH 41/45] drivers: align dpaa2 event port depths with hardware rings Prashant Gupta
2026-09-03 13:53 ` [PATCH 42/45] net/dpaa2: read MC version from device private data Prashant Gupta
2026-09-03 13:53 ` [PATCH 43/45] net/dpaa2: do not overwrite mbuf hash with drop priority Prashant Gupta
2026-09-03 13:53 ` [PATCH 44/45] bus/fslmc: reduce probe-time logging and MC traffic Prashant Gupta
2026-09-03 13:53 ` [PATCH 45/45] net/dpaa2: reject Rx queue deferred start Prashant Gupta
2026-09-07 20:35 ` [PATCH 00/45] net/dpaa2: features and fixes for NXP DPAA2 drivers Stephen Hemminger
2026-09-07 20:47 ` Stephen Hemminger
2026-09-07 21:03 ` Stephen Hemminger
2026-09-07 21:10 ` Stephen Hemminger
2026-09-07 21:22 ` Stephen Hemminger
2026-09-10 13:51 ` [PATCH v2 00/47] NXP DPAA2 driver updates and fixes Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 01/47] crypto/dpaa2_sec: fix buffer overflow in GCM decrypt Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 02/47] crypto/dpaa2_sec: fix FLE pool leak on sec FD build failure Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 03/47] crypto/dpaa2_sec: support AES-GMAC Prashant Gupta
2026-09-24 10:32     ` [EXTERNAL] " Akhil Goyal
2026-09-10 13:51   ` [PATCH v2 04/47] crypto/dpaa2_sec: increase ivsize range for AES-CTR Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 05/47] crypto/dpaa2_sec: add missing ECN capability Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 06/47] crypto/dpaa2_sec: add support for env variables Prashant Gupta
2026-09-24 10:33     ` [EXTERNAL] " Akhil Goyal
2026-09-10 13:51   ` [PATCH v2 07/47] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 08/47] dma/dpaa2: fix array-bounds warning in dequeue path Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 09/47] bus/fslmc: defer bus initialization to probe Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 10/47] dma/dpaa2: validate IOVA in pre-populate helpers Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 11/47] dma/dpaa2: optimize context index ring enqueue Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 12/47] drivers: add dpaa2 DMA bypass memory translation option Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 13/47] mempool/dpaa2: support ops index from primary in secondary Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 14/47] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 15/47] drivers: optimize dpaa2 Tx queue and channel mapping Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 16/47] net/dpaa2: support larger burst size Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 17/47] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 18/47] net/dpaa2: support meter and policing Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 19/47] net/dpaa2: support flow drop action Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 20/47] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 21/47] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 22/47] net/dpaa2: add minimum key size support Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 23/47] net/dpaa2: restructure dpaa2 parser processing Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 24/47] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 25/47] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 26/47] drivers: refresh dpaa2 MC and SoC version info Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 27/47] drivers: identify dpaa2 soft parser protocol Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 28/47] drivers: assign dpaa2 Rx CGID per traffic class Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 29/47] drivers: inherit dpaa2 rxq config for event queue Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 30/47] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 31/47] drivers: rework dpaa2 Tx confirmation Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 32/47] net/dpaa2: ptp enhancements Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 33/47] net/dpaa2: remove unused soft parser Tx code Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 34/47] net/dpaa2: update MC dpni QoS and flow steering API Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 35/47] net/dpaa2: enhance xstat implementation Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 36/47] net/dpaa2: rework flow engine Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 37/47] net/dpaa2: support GENEVE flow item Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 38/47] net/dpaa2: support flow meter and policer actions Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 39/47] net/dpaa2: support flow table miss actions Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 40/47] net/dpaa2: support Rx mempool per traffic class Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 41/47] drivers: consume dpaa2 DQRR entries in batches Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 42/47] drivers: resolve dpaa2 endpoint in the net driver Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 43/47] drivers: align dpaa2 event port depths with hardware rings Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 44/47] net/dpaa2: read MC version from device private data Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 45/47] net/dpaa2: do not overwrite mbuf hash with drop priority Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 46/47] bus/fslmc: reduce probe-time logging and MC traffic Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 47/47] net/dpaa2: reject Rx queue deferred start Prashant Gupta
2026-09-15 11:34     ` [PATCH v3-S2 00/13] net/dpaa2: flow, meter and parser features Prashant Gupta
2026-09-15 11:34       ` [PATCH v3-S2 01/13] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-09-15 11:34       ` [PATCH v3-S2 02/13] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-09-15 11:34       ` [PATCH v3-S2 03/13] net/dpaa2: support larger burst size Prashant Gupta
2026-09-15 11:34       ` [PATCH v3-S2 04/13] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-09-15 11:34       ` [PATCH v3-S2 05/13] net/dpaa2: support meter and policing Prashant Gupta
2026-09-15 11:34       ` [PATCH v3-S2 06/13] net/dpaa2: support flow drop action Prashant Gupta
2026-09-15 11:34       ` [PATCH v3-S2 07/13] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-09-15 11:34       ` [PATCH v3-S2 08/13] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-09-15 11:34       ` [PATCH v3-S2 09/13] net/dpaa2: add minimum key size support Prashant Gupta
2026-09-15 11:34       ` [PATCH v3-S2 10/13] net/dpaa2: restructure dpaa2 parser processing Prashant Gupta
2026-09-15 11:34       ` [PATCH v3-S2 11/13] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-09-15 11:34       ` [PATCH v3-S2 12/13] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-09-15 11:34       ` [PATCH v3-S2 13/13] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-09-15 12:01       ` [PATCH v3-S3 00/10] net/dpaa2: bus, DMA, eventdev and datapath rework Prashant Gupta
2026-09-15 12:01         ` [PATCH v3-S3 01/10] drivers: add dpaa2 DMA bypass memory translation option Prashant Gupta
2026-09-15 12:02         ` [PATCH v3-S3 02/10] drivers: optimize dpaa2 Tx queue and channel mapping Prashant Gupta
2026-09-15 12:02         ` [PATCH v3-S3 03/10] drivers: refresh dpaa2 MC and SoC version info Prashant Gupta
2026-09-17  6:51           ` David Marchand
2026-09-15 12:02         ` [PATCH v3-S3 04/10] drivers: identify dpaa2 soft parser protocol Prashant Gupta
2026-09-15 12:02         ` [PATCH v3-S3 05/10] drivers: assign dpaa2 Rx CGID per traffic class Prashant Gupta
2026-09-15 12:02         ` [PATCH v3-S3 06/10] drivers: inherit dpaa2 rxq config for event queue Prashant Gupta
2026-09-17  6:52           ` David Marchand
2026-09-15 12:02         ` [PATCH v3-S3 07/10] drivers: rework dpaa2 Tx confirmation Prashant Gupta
2026-09-15 12:02         ` [PATCH v3-S3 08/10] drivers: consume dpaa2 DQRR entries in batches Prashant Gupta
2026-09-15 12:02         ` [PATCH v3-S3 09/10] drivers: resolve dpaa2 endpoint in the net driver Prashant Gupta
2026-09-15 12:02         ` [PATCH v3-S3 10/10] drivers: align dpaa2 event port depths with hardware rings Prashant Gupta
2026-10-23 13:42         ` [PATCH v4-S3 00/65] net/dpaa2, event/dpaa2 and fslmc rework Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 01/65] net/dpaa2: refactor and optimize Rx parser result decode Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 02/65] net/dpaa2: generate devargs table and string from one list Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 03/65] crypto/dpaa2_sec: use table-driven devargs parsing Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 04/65] dma/dpaa2: " Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 05/65] net/dpaa2: unify debug dump via log based helpers Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 06/65] net/dpaa2: expose Rx L3/L4/L5 offsets via mbuf dynfield Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 07/65] net/dpaa2: optimize dpaa2 Tx queue and channel mapping Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 08/65] bus/fslmc: split bus-level device walk from VFIO primitives Prashant Gupta
2026-10-23 15:00             ` David Marchand
2026-10-23 13:42           ` [PATCH v4-S3 09/65] bus/fslmc: centralize MC version and SoC detection in the bus layer Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 10/65] net/dpaa2: remove unused soft parser loader Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 11/65] net/dpaa2: cache per-rxq DPNI queue cfg and share CGID per TC Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 12/65] The dpaa2 PMD so far supported only two Tx buffer release schemes: direct release by hardware, and an absolute Tx confirmation mode (drv_tx_conf=1) where every transmitted buffer is returned on a Tx confirmation queue that software must poll to free the buffers. Absolute confirmation adds a confirmation descriptor and a poll cost for all packets, even those the hardware could free on its own Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 13/65] net/dpaa2: support runtime IEEE1588 timestamping Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 14/65] bus/fslmc: consume dpaa2 DQRR entries in batches Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 15/65] bus/fslmc: align dpaa2 event port depths with hardware rings Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 16/65] net/dpaa2: support multi-DPNI FS redirect and QoS table v3 Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 17/65] net/dpaa2: rework xstats with page table and MAC support Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 18/65] net/dpaa2: unify xstats layout and add DPMAC counter struct Prashant Gupta
2026-10-23 13:42           ` [PATCH v4-S3 19/65] net/dpaa2: reimplement xstats_get() on top of xstats_get_by_id() Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 20/65] net/dpaa2: fetch only requested MAC xstats in one MC call Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 21/65] net/dpaa2: rework flow with per-table profile and group types Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 22/65] net/dpaa2: reimplement RSS distribution via rte_flow Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 23/65] net/dpaa2: expand IP address extracts for RSS hashing Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 24/65] net/dpaa2: add policer v2 MC command and L2/L3 byte units Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 25/65] net/dpaa2: support rte_mtr and METER rte_flow action Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 26/65] net/dpaa2: program flow table miss actions via rte_flow Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 27/65] net/dpaa2: support DCB Rx mode " Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 28/65] net/dpaa2: reject Rx queue deferred start Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 29/65] bus/fslmc: support DPCI peer and dynamic queues Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 30/65] bus/fslmc: add alloc/free DPIO API for non-affine portals Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 31/65] event/dpaa2: rework event port model and DPCI handling Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 32/65] event/dpaa2: fix Tx adapter enqueue for mixed destinations Prashant Gupta
2026-10-23 13:43           ` Prashant Gupta [this message]
2026-10-23 13:43           ` [PATCH v4-S3 34/65] event/dpaa2: add DPCON based standalone Rx scheduler Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 35/65] event/dpaa2: add push mode to DPCON " Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 36/65] event/dpaa2: drain Rx scheduler queues on destroy Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 37/65] event/dpaa2: track and detach attached Rx queues Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 38/65] net/dpaa2: add multi-port Tx API Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 39/65] event/dpaa2: limit attached Rx flows per event queue Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 40/65] eventdev: fix port link/unlink callback return documentation Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 41/65] event/dpaa2: allow event queue link to multiple ports Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 42/65] event/dpaa2: report available DPIO count and fix create cleanup Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 43/65] event/dpaa2: use event port DPIO for dequeue wait Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 44/65] bus/fslmc: consolidate DPIO interrupt setup and bound coalescing Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 45/65] event/dpaa2: honor configured dequeue timeout Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 46/65] bus/fslmc: use EAL API for DPIO interrupt Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 47/65] bus/fslmc: defer DPIO interrupt setup and bind portal to worker core Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 48/65] bus/fslmc: move Tx SG mempool to fslmc bus Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 49/65] net/dpaa2: move DPNI endpoint lookup out of the " Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 50/65] net/dpaa2: add APIs to query device info and set default action Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 51/65] net/dpaa2: consolidate dequeue paths and optimize fast path Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 52/65] net/dpaa2: bind per-queue DPIO for rx-queue interrupts Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 53/65] net/dpaa2: add API to clean Tx confirmation queue Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 54/65] event/dpaa2: fix DQRR held buffer accounting on enqueue Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 55/65] bus/fslmc: store dequeue dpio in mbuf seq dynfield Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 56/65] bus/fslmc: use explicit flags for mbuf seqn encoding Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 57/65] net/dpaa2: unify tx burst path for ordered and atomic enqueue Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 58/65] crypto/dpaa2_sec: unify enqueue burst path for ordered enqueue Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 59/65] bus/fslmc: track atomic DCA context per dequeue dpio Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 60/65] bus/fslmc: move enqueue response descriptors to per-queue Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 61/65] event/dpaa2: add ordered schedule type support Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 62/65] bus/fslmc: make DPAA2 ORP/ODP ordering per-queue instead of per-device Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 63/65] event/dpaa2: support multi-port enqueue in selftest random event generator Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 64/65] event/dpaa2: do not fail device creation on DPCI errors Prashant Gupta
2026-10-23 13:43           ` [PATCH v4-S3 65/65] net/dpaa2: add Tx fast path for no-confirmation case Prashant Gupta
2026-09-15 15:42       ` [PATCH v3-S2 00/13] net/dpaa2: flow, meter and parser features Stephen Hemminger
2026-09-22  9:55       ` [PATCH v4-S2 " Prashant Gupta
2026-09-22  9:55         ` [PATCH v4-S2 01/13] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-09-22  9:55         ` [PATCH v4-S2 02/13] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-09-22  9:55         ` [PATCH v4-S2 03/13] net/dpaa2: support larger burst size Prashant Gupta
2026-09-22  9:55         ` [PATCH v4-S2 04/13] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-09-22  9:55         ` [PATCH v4-S2 05/13] net/dpaa2: support meter and policing Prashant Gupta
2026-09-22  9:55         ` [PATCH v4-S2 06/13] net/dpaa2: support flow drop action Prashant Gupta
2026-09-22  9:55         ` [PATCH v4-S2 07/13] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-09-22  9:55         ` [PATCH v4-S2 08/13] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-09-22  9:55         ` [PATCH v4-S2 09/13] net/dpaa2: add minimum key size support Prashant Gupta
2026-09-22  9:55         ` [PATCH v4-S2 10/13] net/dpaa2: restructure dpaa2 parser processing Prashant Gupta
2026-09-22  9:55         ` [PATCH v4-S2 11/13] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-09-22  9:55         ` [PATCH v4-S2 12/13] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-09-22  9:55         ` [PATCH v4-S2 13/13] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-09-22 13:39         ` [PATCH v4-S2 00/13] net/dpaa2: flow, meter and parser features Stephen Hemminger
2026-10-01  7:32         ` [PATCH v5-S2 " Prashant Gupta
2026-10-01  7:32           ` [PATCH v5-S2 01/13] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-10-01  7:32           ` [PATCH v5-S2 02/13] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-10-01  7:32           ` [PATCH v5-S2 03/13] net/dpaa2: support larger burst size Prashant Gupta
2026-10-01  7:32           ` [PATCH v5-S2 04/13] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-10-01  7:32           ` [PATCH v5-S2 05/13] net/dpaa2: support meter and policing Prashant Gupta
2026-10-01  7:33           ` [PATCH v5-S2 06/13] net/dpaa2: support flow drop action Prashant Gupta
2026-10-01  7:33           ` [PATCH v5-S2 07/13] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-10-01  7:33           ` [PATCH v5-S2 08/13] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-10-01  7:33           ` [PATCH v5-S2 09/13] net/dpaa2: add minimum key size support Prashant Gupta
2026-10-01  7:33           ` [PATCH v5-S2 10/13] net/dpaa2: restructure dpaa2 parser processing Prashant Gupta
2026-10-01  7:33           ` [PATCH v5-S2 11/13] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-10-01  7:33           ` [PATCH v5-S2 12/13] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-10-01  7:33           ` [PATCH v5-S2 13/13] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-10-02 16:42           ` [PATCH v5-S2 00/13] net/dpaa2: flow, meter and parser features Stephen Hemminger
2026-10-06 15:09           ` [PATCH v6-S2 " Prashant Gupta
2026-10-06 15:09             ` [PATCH v6-S2 01/13] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-10-06 15:09             ` [PATCH v6-S2 02/13] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-10-06 15:09             ` [PATCH v6-S2 03/13] net/dpaa2: support larger burst size Prashant Gupta
2026-10-06 15:10             ` [PATCH v6-S2 04/13] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-10-06 15:10             ` [PATCH v6-S2 05/13] net/dpaa2: support meter and policing Prashant Gupta
2026-10-06 15:10             ` [PATCH v6-S2 06/13] net/dpaa2: support flow drop action Prashant Gupta
2026-10-06 15:10             ` [PATCH v6-S2 07/13] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-10-06 15:10             ` [PATCH v6-S2 08/13] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-10-06 15:10             ` [PATCH v6-S2 09/13] net/dpaa2: add minimum key size support Prashant Gupta
2026-10-06 15:10             ` [PATCH v6-S2 10/13] net/dpaa2: restructure dpaa2 parser processing Prashant Gupta
2026-10-06 15:10             ` [PATCH v6-S2 11/13] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-10-06 15:10             ` [PATCH v6-S2 12/13] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-10-06 15:10             ` [PATCH v6-S2 13/13] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-10-07  6:02             ` [PATCH v7-S2 00/13] net/dpaa2: flow, meter and parser features Prashant Gupta
2026-10-07  6:02               ` [PATCH v7-S2 01/13] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-10-07  6:02               ` [PATCH v7-S2 02/13] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-10-07  6:02               ` [PATCH v7-S2 03/13] net/dpaa2: support larger burst size Prashant Gupta
2026-10-07  6:02               ` [PATCH v7-S2 04/13] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-10-07  6:02               ` [PATCH v7-S2 05/13] net/dpaa2: support meter and policing Prashant Gupta
2026-10-07  6:02               ` [PATCH v7-S2 06/13] net/dpaa2: support flow drop action Prashant Gupta
2026-10-07  6:02               ` [PATCH v7-S2 07/13] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-10-07  6:02               ` [PATCH v7-S2 08/13] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-10-07  6:02               ` [PATCH v7-S2 09/13] net/dpaa2: add minimum key size support Prashant Gupta
2026-10-07  6:02               ` [PATCH v7-S2 10/13] net/dpaa2: restructure dpaa2 parser processing Prashant Gupta
2026-10-07  6:02               ` [PATCH v7-S2 11/13] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-10-07  6:02               ` [PATCH v7-S2 12/13] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-10-07  6:02               ` [PATCH v7-S2 13/13] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-10-07 16:25               ` [PATCH v7-S2 00/13] net/dpaa2: flow, meter and parser features Stephen Hemminger
2026-10-09 10:48               ` [PATCH v8-S2 00/13] net/dpaa2 updates Prashant Gupta
2026-10-09 10:48                 ` [PATCH v8-S2 01/13] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-10-09 10:48                 ` [PATCH v8-S2 02/13] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-10-09 10:48                 ` [PATCH v8-S2 03/13] net/dpaa2: support larger burst size Prashant Gupta
2026-10-09 10:48                 ` [PATCH v8-S2 04/13] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-10-09 10:48                 ` [PATCH v8-S2 05/13] net/dpaa2: support meter and policing Prashant Gupta
2026-10-09 10:48                 ` [PATCH v8-S2 06/13] net/dpaa2: support flow drop action Prashant Gupta
2026-10-09 10:48                 ` [PATCH v8-S2 07/13] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-10-09 10:48                 ` [PATCH v8-S2 08/13] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-10-09 10:48                 ` [PATCH v8-S2 09/13] net/dpaa2: add minimum key size support Prashant Gupta
2026-10-09 10:48                 ` [PATCH v8-S2 10/13] net/dpaa2: restructure dpaa2 parser processing Prashant Gupta
2026-10-09 10:48                 ` [PATCH v8-S2 11/13] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-10-09 10:48                 ` [PATCH v8-S2 12/13] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-10-09 10:49                 ` [PATCH v8-S2 13/13] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-10-09 19:09                 ` [PATCH v8-S2 00/13] net/dpaa2 updates Stephen Hemminger
2026-10-12  7:04                 ` [PATCH v9-S2 " Prashant Gupta
2026-10-12  7:04                   ` [PATCH v9-S2 01/13] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-10-13 14:52                     ` Stephen Hemminger
2026-10-12  7:04                   ` [PATCH v9-S2 02/13] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-10-12  7:04                   ` [PATCH v9-S2 03/13] net/dpaa2: support larger burst size Prashant Gupta
2026-10-12  7:04                   ` [PATCH v9-S2 04/13] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-10-13 14:54                     ` Stephen Hemminger
2026-10-12  7:04                   ` [PATCH v9-S2 05/13] net/dpaa2: support meter and policing Prashant Gupta
2026-10-13 14:55                     ` Stephen Hemminger
2026-10-13 14:56                     ` Stephen Hemminger
2026-10-13 15:11                     ` Stephen Hemminger
2026-10-12  7:04                   ` [PATCH v9-S2 06/13] net/dpaa2: support flow drop action Prashant Gupta
2026-10-12  7:04                   ` [PATCH v9-S2 07/13] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-10-12  7:04                   ` [PATCH v9-S2 08/13] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-10-12  7:04                   ` [PATCH v9-S2 09/13] net/dpaa2: add minimum key size support Prashant Gupta
2026-10-12  7:04                   ` [PATCH v9-S2 10/13] net/dpaa2: restructure dpaa2 parser processing Prashant Gupta
2026-10-12  7:04                   ` [PATCH v9-S2 11/13] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-10-12  7:04                   ` [PATCH v9-S2 12/13] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-10-12  7:04                   ` [PATCH v9-S2 13/13] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-10-12 21:22                   ` [PATCH v9-S2 00/13] net/dpaa2 updates Stephen Hemminger
2026-10-14  5:43                   ` [PATCH v10-S2 00/11] " Prashant Gupta
2026-10-14  5:43                     ` [PATCH v10-S2 01/11] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-10-14  5:43                     ` [PATCH v10-S2 02/11] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-10-14  5:43                     ` [PATCH v10-S2 03/11] net/dpaa2: support larger burst size Prashant Gupta
2026-10-14  5:43                     ` [PATCH v10-S2 04/11] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-10-14  5:43                     ` [PATCH v10-S2 05/11] net/dpaa2: support flow drop action Prashant Gupta
2026-10-14  5:43                     ` [PATCH v10-S2 06/11] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-10-14  5:43                     ` [PATCH v10-S2 07/11] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-10-14  5:43                     ` [PATCH v10-S2 08/11] net/dpaa2: add minimum key size support Prashant Gupta
2026-10-14  5:43                     ` [PATCH v10-S2 09/11] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-10-14 17:18                       ` Stephen Hemminger
2026-10-14  5:43                     ` [PATCH v10-S2 10/11] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-10-14  5:44                     ` [PATCH v10-S2 11/11] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-10-15  9:25                     ` [PATCH v11-S2 00/11] net/dpaa2 updates Prashant Gupta
2026-10-15  9:25                       ` [PATCH v11-S2 01/11] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-10-15  9:25                       ` [PATCH v11-S2 02/11] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-10-15  9:25                       ` [PATCH v11-S2 03/11] net/dpaa2: support larger burst size Prashant Gupta
2026-10-15  9:25                       ` [PATCH v11-S2 04/11] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-10-15  9:25                       ` [PATCH v11-S2 05/11] net/dpaa2: support flow drop action Prashant Gupta
2026-10-15  9:25                       ` [PATCH v11-S2 06/11] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-10-15  9:25                       ` [PATCH v11-S2 07/11] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-10-15  9:25                       ` [PATCH v11-S2 08/11] net/dpaa2: add minimum key size support Prashant Gupta
2026-10-15  9:25                       ` [PATCH v11-S2 09/11] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-10-15  9:25                       ` [PATCH v11-S2 10/11] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-10-15 23:36                         ` Stephen Hemminger
2026-10-15  9:25                       ` [PATCH v11-S2 11/11] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-10-15 23:26                       ` [PATCH v11-S2 00/11] net/dpaa2 updates Stephen Hemminger
2026-10-16  7:03                       ` [PATCH v12-S2 " Prashant Gupta
2026-10-16  7:03                         ` [PATCH v12-S2 01/11] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-10-16  7:03                         ` [PATCH v12-S2 02/11] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-10-16  7:03                         ` [PATCH v12-S2 03/11] net/dpaa2: support larger burst size Prashant Gupta
2026-10-16  7:03                         ` [PATCH v12-S2 04/11] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-10-16  7:03                         ` [PATCH v12-S2 05/11] net/dpaa2: support flow drop action Prashant Gupta
2026-10-16  7:03                         ` [PATCH v12-S2 06/11] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-10-16  7:03                         ` [PATCH v12-S2 07/11] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-10-16  7:03                         ` [PATCH v12-S2 08/11] net/dpaa2: add minimum key size support Prashant Gupta
2026-10-16  7:03                         ` [PATCH v12-S2 09/11] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-10-16  7:03                         ` [PATCH v12-S2 10/11] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-10-20 13:45                           ` Stephen Hemminger
2026-10-16  7:03                         ` [PATCH v12-S2 11/11] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-10-16 16:18                         ` [PATCH v12-S2 00/11] net/dpaa2 updates Stephen Hemminger
2026-10-19 18:34                         ` [PATCH v13-S2 00/10] " Prashant Gupta
2026-10-19 18:34                           ` [PATCH v13-S2 01/10] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-10-19 18:34                           ` [PATCH v13-S2 02/10] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-10-19 18:34                           ` [PATCH v13-S2 03/10] net/dpaa2: support larger burst size Prashant Gupta
2026-10-19 18:34                           ` [PATCH v13-S2 04/10] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-10-19 18:34                           ` [PATCH v13-S2 05/10] net/dpaa2: support flow drop action Prashant Gupta
2026-10-19 18:34                           ` [PATCH v13-S2 06/10] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-10-19 18:34                           ` [PATCH v13-S2 07/10] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-10-19 18:34                           ` [PATCH v13-S2 08/10] net/dpaa2: add minimum key size support Prashant Gupta
2026-10-19 18:34                           ` [PATCH v13-S2 09/10] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-10-19 18:34                           ` [PATCH v13-S2 10/10] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-10-20 14:48                           ` [PATCH v14-S2 00/10] net/dpaa2 updates Prashant Gupta
2026-10-20 14:48                             ` [PATCH v14-S2 01/10] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-10-20 14:48                             ` [PATCH v14-S2 02/10] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-10-20 14:48                             ` [PATCH v14-S2 03/10] net/dpaa2: support larger burst size Prashant Gupta
2026-10-20 14:48                             ` [PATCH v14-S2 04/10] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-10-20 14:48                             ` [PATCH v14-S2 05/10] net/dpaa2: support flow drop action Prashant Gupta
2026-10-20 14:48                             ` [PATCH v14-S2 06/10] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-10-20 14:48                             ` [PATCH v14-S2 07/10] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-10-20 14:48                             ` [PATCH v14-S2 08/10] net/dpaa2: add minimum key size support Prashant Gupta
2026-10-20 14:48                             ` [PATCH v14-S2 09/10] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-10-20 14:48                             ` [PATCH v14-S2 10/10] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-10-20 15:07                             ` [PATCH v14-S2 00/10] net/dpaa2 updates Stephen Hemminger
2026-09-10 16:57   ` [PATCH v2 00/47] NXP DPAA2 driver updates and fixes Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261023134346.37727-34-prashant.gupta_3@nxp.com \
    --to=prashant.gupta_3@nxp.com \
    --cc=dev@dpdk.org \
    --cc=jun.yang@nxp.com \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.