From: clement.leger@linux.dev
To: Sascha Hauer <s.hauer@pengutronix.de>, barebox@lists.infradead.org
Cc: "Ahmad Fatoum" <a.fatoum@barebox.org>,
"Clément Léger" <clement.leger@linux.dev>
Subject: [PATCH 2/5] drivers: clocksource: remove KVX timer
Date: Fri, 23 Oct 2026 22:05:04 +0200 [thread overview]
Message-ID: <20261023200507.63716-3-clement.leger@linux.dev> (raw)
In-Reply-To: <20261023200507.63716-1-clement.leger@linux.dev>
From: Clément Léger <clement.leger@linux.dev>
Remove the kvx timer driver.
Signed-off-by: Clément Léger <clement.leger@linux.dev>
---
drivers/clocksource/Kconfig | 4 ---
drivers/clocksource/Makefile | 1 -
drivers/clocksource/kvx_timer.c | 60 ---------------------------------
3 files changed, 65 deletions(-)
delete mode 100644 drivers/clocksource/kvx_timer.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index b3ad477ce3..ef4ed6f820 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -48,10 +48,6 @@ config CLOCKSOURCE_EFI_X86
bool "EFI X86 HW driver"
depends on EFI_PAYLOAD && X86
-config CLOCKSOURCE_KVX
- bool "KVX core timer clocksource"
- depends on KVX
-
config CLOCKSOURCE_MVEBU
bool "MVEBU clock source" if COMPILE_TEST
depends on ARCH_MVEBU || COMPILE_TEST
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index ec12e7babb..3850abd6f2 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_CLOCKSOURCE_CLPS711X) += clps711x.o
obj-$(CONFIG_CLOCKSOURCE_DIGIC) += digic.o
obj-$(CONFIG_CLOCKSOURCE_EFI) += efi.o
obj-$(CONFIG_CLOCKSOURCE_EFI_X86) += efi_x86.o
-obj-$(CONFIG_CLOCKSOURCE_KVX) += kvx_timer.o
obj-$(CONFIG_CLOCKSOURCE_MVEBU) += mvebu.o
obj-$(CONFIG_CLOCKSOURCE_NOMADIK) += nomadik.o
obj-$(CONFIG_CLOCKSOURCE_ORION) += orion.o
diff --git a/drivers/clocksource/kvx_timer.c b/drivers/clocksource/kvx_timer.c
deleted file mode 100644
index eaa8f63b1e..0000000000
--- a/drivers/clocksource/kvx_timer.c
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2018 Kalray Inc.
- */
-
-#include <common.h>
-#include <clock.h>
-#include <init.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <asm/sfr.h>
-
-static uint64_t kvx_pm_read(void)
-{
- return kvx_sfr_get(PM0);
-}
-
-static struct clocksource kvx_clksrc = {
- .read = kvx_pm_read,
- .mask = CLOCKSOURCE_MASK(64),
- .shift = 0,
- .priority = 70,
-};
-
-static int kvx_timer_probe(struct device *dev)
-{
- struct clk *clk;
- uint32_t clk_freq;
-
- /* Get clock frequency */
- clk = clk_get(dev, NULL);
- if (IS_ERR(clk)) {
- dev_err(dev, "Failed to get CPU clock: %ld\n", PTR_ERR(clk));
- return PTR_ERR(clk);
- }
-
- clk_freq = clk_get_rate(clk);
- clk_put(clk);
-
- /* Init clocksource */
- kvx_clksrc.mult = clocksource_hz2mult(clk_freq, kvx_clksrc.shift);
-
- return init_clock(&kvx_clksrc);
-}
-
-static struct of_device_id kvx_timer_dt_ids[] = {
- { .compatible = "kalray,kvx-core-timer", },
- { }
-};
-MODULE_DEVICE_TABLE(of, kvx_timer_dt_ids);
-
-static struct driver kvx_timer_driver = {
- .name = "kvx-timer",
- .probe = kvx_timer_probe,
- .of_compatible = DRV_OF_COMPAT(kvx_timer_dt_ids),
-};
-
-postcore_platform_driver(kvx_timer_driver);
--
2.55.0
next prev parent reply other threads:[~2026-10-23 20:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-23 20:05 [PATCH 0/5] kvx: remove architecture support clement.leger
2026-10-23 20:05 ` [PATCH 1/5] drivers: soc: remove KVX support clement.leger
2026-10-23 20:05 ` clement.leger [this message]
2026-10-23 20:05 ` [PATCH 3/5] drivers: nvmem: remove KVX OTP support clement.leger
2026-10-23 20:05 ` [PATCH 4/5] drivers: watchdog: remove KVX watchdog clement.leger
2026-10-26 10:01 ` [PATCH 0/5] kvx: remove architecture support Sascha Hauer
2026-10-26 15:28 ` Clement Leger
2026-10-26 10:01 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261023200507.63716-3-clement.leger@linux.dev \
--to=clement.leger@linux.dev \
--cc=a.fatoum@barebox.org \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.