All of lore.kernel.org
 help / color / mirror / Atom feed
From: Artem Shimko <a.shimko.dev@gmail.com>
To: tzungbi@kernel.org, linux@roeck-us.net, p.zabel@pengutronix.de,
	Sergey.Semin@baikalelectronics.ru,
	mika.westerberg@linux.intel.com, andi.shyti@kernel.org,
	iav@iav.lv
Cc: Artem Shimko <a.shimko.dev@gmail.com>,
	wim@linux-watchdog.org, linux-watchdog@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/2] watchdog: dw_wdt: fix reset line management
Date: Sat, 24 Oct 2026 15:14:22 +0300	[thread overview]
Message-ID: <20261024121428.18862-1-a.shimko.dev@gmail.com> (raw)
In-Reply-To: <y>

Hello,

This is v3 of the series fixing reset line management in the dw_wdt
driver.

Testing:

$ ls /dev/watchdog*
/dev/watchdog   /dev/watchdog1  /dev/watchdog3
/dev/watchdog0  /dev/watchdog2

$ ls /sys/class/watchdog/
watchdog0  watchdog1  watchdog2  watchdog3

$ chmod +x watchdog-test
$ ./watchdog-test -f /dev/watchdog0 -i -s
watchdog_info:
 identity:              Synopsys DesignWare Watchdog
 firmware_version:      0
Support/Status: Set timeout (in seconds)
Support/Status: Supports magic close char
Support/Status: Pretimeout (in seconds), get/set
Support/Status: Keep alive ping reply
Support/Status: Keep alive ping reply

$ echo mem > /sys/power/state
...
...
[ 1560.147058] PM: suspend exit
[ 1560.371470] usb 1-1: new high-speed USB device number 3 using xhci-hcd
[ 1561.031825] cdc_ncm 1-1:2.0: MAC-Address: a4:2a:95:e8:fc:e4
[ 1561.037736] cdc_ncm 1-1:2.0: setting rx_max = 16384
[ 1561.054408] cdc_ncm 1-1:2.0: setting tx_max = 16384
[ 1561.084713] cdc_ncm 1-1:2.0 eth0: register 'cdc_ncm' at usb-xhci-hcd.2.auto-1, CDC NCM (NO ZLP), a4:2a:95:e8:fc:e4

$ ./watchdog-test -f /dev/watchdog0 -i -s
watchdog_info:
 identity:              Synopsys DesignWare Watchdog
 firmware_version:      0
Support/Status: Set timeout (in seconds)
Support/Status: Supports magic close char
Support/Status: Pretimeout (in seconds), get/set
Support/Status: Keep alive ping reply
Support/Status: Keep alive ping reply

$ ls /dev/watchdog*
/dev/watchdog   /dev/watchdog1  /dev/watchdog3
/dev/watchdog0  /dev/watchdog2

$ echo 1 > /dev/watchdog0
$ cat /sys/kernel/debug/1e012000.wdt/registers | grep ccvr
ccvr = 0x09a7baab
$ cat /sys/kernel/debug/1e012000.wdt/registers | grep ccvr
ccvr = 0x0599dce0
$ cat /sys/kernel/debug/1e012000.wdt/registers | grep ccvr
ccvr = 0x01926467
$ [  110.392536] watchdog0: pretimeout event

Thank you.

--
Best regards,
Artem

ChangeLog:
  v1:
    * https://lore.kernel.org/all/20260320135624.223863-1-a.shimko.dev@gmail.com/T/#t
  v2:
    * Reduced from 5 patches to 3: manual reset handling is replaced by
      the devm _deasserted variant from the start, so the intermediate
      states that could leak the deasserted reset line are gone and every
      commit is self-contained.
    * https://lore.kernel.org/all/20261022134354.534642-1-a.shimko.dev@gmail.com/T/#t
  v3:
    * Squashed the last two commits.
    * Add error check for reset_control_assert() in dw_wdt_suspend()

Artem Shimko (2):
  watchdog: dw_wdt: use
    devm_reset_control_get_optional_shared_deasserted
  watchdog: dw_wdt: manage reset line during system suspend/resume

 drivers/watchdog/dw_wdt.c | 40 +++++++++++++++++++++++----------------
 1 file changed, 24 insertions(+), 16 deletions(-)

-- 
2.43.0


             reply	other threads:[~2026-10-24 12:14 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-24 12:14 Artem Shimko [this message]
2026-10-24 12:14 ` [PATCH v3 1/2] watchdog: dw_wdt: use devm_reset_control_get_optional_shared_deasserted Artem Shimko
2026-10-24 12:14 ` [PATCH v3 2/2] watchdog: dw_wdt: manage reset line during system suspend/resume Artem Shimko
2026-10-24 13:19   ` Tzung-Bi Shih

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261024121428.18862-1-a.shimko.dev@gmail.com \
    --to=a.shimko.dev@gmail.com \
    --cc=Sergey.Semin@baikalelectronics.ru \
    --cc=andi.shyti@kernel.org \
    --cc=iav@iav.lv \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mika.westerberg@linux.intel.com \
    --cc=p.zabel@pengutronix.de \
    --cc=tzungbi@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.