From: Tristan Madani <tristmd@gmail.com>
To: Mark Brown <broonie@kernel.org>, Takashi Iwai <tiwai@suse.com>
Cc: Oder Chiou <oder_chiou@realtek.com>,
Bard Liao <bardliao@realtek.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>,
Jorge Eduardo Candelaria <jorge.candelaria@ti.com>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org,
Tristan Madani <tristan@talencesecurity.com>
Subject: [PATCH 2/4] ASoC: rt5659: cancel jack_detect_work on component remove
Date: Mon, 26 Oct 2026 11:22:10 +0000 [thread overview]
Message-ID: <20261026112212.2519775-3-tristmd@gmail.com> (raw)
In-Reply-To: <20261026112212.2519775-1-tristmd@gmail.com>
From: Tristan Madani <tristan@talencesecurity.com>
rt5659_remove() resets the codec via regmap_write() but does not cancel
the pending jack_detect_work. Since the IRQ is registered with
devm_request_threaded_irq(), it remains active until after the component
remove callback returns. The IRQ handler (rt5659_irq) schedules
jack_detect_work, so a late interrupt can queue work that runs against a
reset codec.
Track successful IRQ acquisition with a flag so that disable_irq()
only quiesces a line this driver actually owns. On component remove,
disable the IRQ to synchronize with any running handler and prevent
new enqueues, then drain the residual jack_detect_work synchronously
before resetting the hardware. On the next component probe (card
rebind), re-enable the IRQ to restore jack detection.
Fixes: d3cb2de2479b ("ASoC: rt5659: add rt5659 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
---
sound/soc/codecs/rt5659.c | 17 ++++++++++++++++-
sound/soc/codecs/rt5659.h | 2 ++
2 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt5659.c b/sound/soc/codecs/rt5659.c
index 3097ee6d4e89f..340d3e7be7a40 100644
--- a/sound/soc/codecs/rt5659.c
+++ b/sound/soc/codecs/rt5659.c
@@ -3664,6 +3664,12 @@ static int rt5659_probe(struct snd_soc_component *component)
{
struct snd_soc_dapm_context *dapm = snd_soc_component_to_dapm(component);
struct rt5659_priv *rt5659 = snd_soc_component_get_drvdata(component);
+ struct i2c_client *i2c = to_i2c_client(component->dev);
+
+ if (rt5659->irq_disabled) {
+ enable_irq(i2c->irq);
+ rt5659->irq_disabled = false;
+ }
rt5659->component = component;
@@ -3684,7 +3690,14 @@ static int rt5659_probe(struct snd_soc_component *component)
static void rt5659_remove(struct snd_soc_component *component)
{
struct rt5659_priv *rt5659 = snd_soc_component_get_drvdata(component);
+ struct i2c_client *i2c = to_i2c_client(component->dev);
+
+ if (rt5659->irq_acquired) {
+ disable_irq(i2c->irq);
+ rt5659->irq_disabled = true;
+ }
+ cancel_delayed_work_sync(&rt5659->jack_detect_work);
regmap_write(rt5659->regmap, RT5659_RESET, 0);
}
@@ -4290,7 +4303,9 @@ static int rt5659_i2c_probe(struct i2c_client *i2c)
ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
rt5659_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
| IRQF_ONESHOT, "rt5659", rt5659);
- if (ret)
+ if (!ret)
+ rt5659->irq_acquired = true;
+ else
dev_err(&i2c->dev, "Failed to request IRQ: %d\n", ret);
/* Enable IRQ output for GPIO1 pin any way */
diff --git a/sound/soc/codecs/rt5659.h b/sound/soc/codecs/rt5659.h
index b49fd8baf4e7e..4df7d7dd99e16 100644
--- a/sound/soc/codecs/rt5659.h
+++ b/sound/soc/codecs/rt5659.h
@@ -1813,6 +1813,8 @@ struct rt5659_priv {
int jack_type;
bool hda_hp_plugged;
bool hda_mic_plugged;
+ bool irq_acquired;
+ bool irq_disabled;
};
int rt5659_set_jack_detect(struct snd_soc_component *component,
--
2.47.3
next prev parent reply other threads:[~2026-10-26 11:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-26 11:22 [PATCH 0/4] ASoC: cancel pending delayed works on component remove Tristan Madani
2026-10-26 11:22 ` [PATCH 1/4] ASoC: rt5668: " Tristan Madani
2026-10-26 12:21 ` sashiko-bot
2026-10-26 11:22 ` Tristan Madani [this message]
2026-10-26 12:41 ` [PATCH 2/4] ASoC: rt5659: cancel jack_detect_work " sashiko-bot
2026-10-26 19:16 ` Mark Brown
2026-10-26 11:22 ` [PATCH 3/4] ASoC: twl6040: cancel headset jack work " Tristan Madani
2026-10-26 11:22 ` [PATCH 4/4] ASoC: wm8994: drain all delayed works " Tristan Madani
2026-10-26 12:57 ` sashiko-bot
2026-10-26 19:16 ` Mark Brown
2026-10-29 10:25 ` [PATCH v9] ASoC: wm8994: drain delayed works on remove and probe error Tristan Madani
2026-10-29 10:42 ` sashiko-bot
2026-10-29 10:57 ` [PATCH v10] " Tristan Madani
2026-10-29 11:11 ` sashiko-bot
2026-10-29 11:18 ` Mark Brown
2026-10-29 11:10 ` [PATCH v9] " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261026112212.2519775-3-tristmd@gmail.com \
--to=tristmd@gmail.com \
--cc=bardliao@realtek.com \
--cc=broonie@kernel.org \
--cc=jorge.candelaria@ti.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=oder_chiou@realtek.com \
--cc=perex@perex.cz \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=tristan@talencesecurity.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.