From: Jeff Roach <jeff.roach0@gmail.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Abel Vesa <abelvesa@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/2] arm64: dts: qcom: Add HP OmniBook X 16-cp1
Date: Mon, 26 Oct 2026 10:39:59 -0500 [thread overview]
Message-ID: <20261026154001.9323-1-jeff.roach0@gmail.com> (raw)
This adds a device tree for the HP OmniBook X 16-cp1 (board 8F46), a 16"
laptop with the 12-core Snapdragon X2 Elite (Mahua).
Tested with Ubuntu's 7.3-based linux-qcom-x1e kernel. Everything listed
in patch 2 works there, including suspend (s2idle).
Notes:
- DisplayPort at HBR2 needs "phy: qualcomm: qmp-combo: update DP PHY PLL
programming on Glymur" v5 [1]. Without it the stream runs at half rate
and the monitor shows no picture. With it, about 1 in 4 plug-ins still
gives no picture; replugging fixes it.
- The GPU is disabled. It works with "drm/msm: Mahua GPU support" [2]
applied; I'll send a follow-up to enable it once that lands.
- Audio needs a topology and UCM config for the "HP-OmniBook-X16" model,
which are not upstream yet. The headphone jack (SDCA) is not described.
- I hit one hard lockup while plugging USB-C devices during testing and
could not reproduce it in later plug/unplug cycles.
This series was written with the help of an AI coding assistant
(Claude): the device tree started from glymur-hp-elitebook-x-g2q.dts and
the laptop's ACPI tables. I reviewed it and tested it on the laptop.
Earlier bring-up report: [3]
Changes in v2:
- Add static data-lanes to usb_2_qmpphy so the PHY uses USB3-only mode
(reported by Sashiko)
- Drop the Assisted-by tag, describe the tool use in the changelog
instead (Krzysztof)
- Link to v1: https://lore.kernel.org/r/20261024044650.9936-1-jeff.roach0@gmail.com
[1] https://lore.kernel.org/all/20261001-glymur-phy-v3-v5-0-3848c2615d5a@oss.qualcomm.com/
[2] https://lore.kernel.org/all/20260925-mahua-gpu-v1-0-0fa0bfd8d315@oss.qualcomm.com/
[3] https://lore.kernel.org/all/CAAnD8Rb4ZZrHFWMJayabioB_8bOHh1mqZ5LCXZz0jTNGMA7UZQ@mail.gmail.com/
Jeff Roach (2):
dt-bindings: arm: qcom: Add HP OmniBook X 16-cp1
arm64: dts: qcom: Add HP OmniBook X 16-cp1
.../devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/mahua-hp-omnibook-x16.dts | 855 ++++++++++++++++++
3 files changed, 857 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/mahua-hp-omnibook-x16.dts
base-commit: f5672a3dff0291d6a45eb0c258b9d2baeb4dc577
--
2.55.0
next reply other threads:[~2026-10-26 15:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-26 15:39 Jeff Roach [this message]
2026-10-26 15:40 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Add HP OmniBook X 16-cp1 Jeff Roach
2026-10-28 11:36 ` Krzysztof Kozlowski
2026-10-26 15:40 ` [PATCH v2 2/2] arm64: dts: " Jeff Roach
2026-10-27 10:49 ` Konrad Dybcio
2026-10-27 19:19 ` Jeff Roach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261026154001.9323-1-jeff.roach0@gmail.com \
--to=jeff.roach0@gmail.com \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.