[PATCH v6 15/15] drm/client: splash: document the image sources

["Màxim Pedraza Padilla" <maximpedraza@gmail.com>]

The overview only said that the client draws a colour or an image. By
now the image can come from three places in a set order, and be placed
and turned. Write it down: the sources and their order, the image
format, placement and rotation, and the background.

Also note that the splash rules out fbdev emulation on the same device,
and that a bootloader that loads no image into a reserved region has to
disable or remove the node, since the region can keep the previous
image across a reset and even a short power cycle.

Pull the overview into Documentation/gpu/drm-client.rst, which covers
the in-kernel clients, so that it is published.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Màxim Pedraza Padilla <maximpedraza@gmail.com>
---
 Documentation/gpu/drm-client.rst     |  6 +++
 drivers/gpu/drm/clients/drm_splash.c | 61 +++++++++++++++++++++++++++-
 2 files changed, 66 insertions(+), 1 deletion(-)

diff --git a/Documentation/gpu/drm-client.rst b/Documentation/gpu/drm-client.rst
index cbcfe30de777..a58d6440d9f2 100644
--- a/Documentation/gpu/drm-client.rst
+++ b/Documentation/gpu/drm-client.rst
@@ -16,3 +16,9 @@ Kernel clients
 
 .. kernel-doc:: drivers/gpu/drm/drm_client_event.c
    :export:
+
+Splash client
+=============
+
+.. kernel-doc:: drivers/gpu/drm/clients/drm_splash.c
+   :doc: overview
diff --git a/drivers/gpu/drm/clients/drm_splash.c b/drivers/gpu/drm/clients/drm_splash.c
index d3ed53cde0f5..0fc72a3fe989 100644
--- a/drivers/gpu/drm/clients/drm_splash.c
+++ b/drivers/gpu/drm/clients/drm_splash.c
@@ -40,7 +40,66 @@
  * DOC: overview
  *
  * This is a simple graphic bootsplash, able to display either a plain color or
- * a static image.
+ * a static image. It draws once the display driver has registered, and again
+ * on every hotplug, on the outputs there are then, until userspace takes the
+ * display over; when userspace lets it go, the splash is shown again.
+ *
+ * It is selected with ``drm_client_lib.active=splash`` or
+ * CONFIG_DRM_CLIENT_DEFAULT_SPLASH. A device has a single in-kernel client, so
+ * with the splash there is no fbdev emulation: no ``/dev/fb0`` and no
+ * framebuffer console.
+ *
+ * Image sources
+ * -------------
+ *
+ * The image is a BMP with a BITMAPINFOHEADER, or its V4 or V5 extension,
+ * 24 bits per pixel and no compression. It comes from the first of these that
+ * is present, each built in with its CONFIG_DRM_CLIENT_SPLASH_SRC_* option; if
+ * that one then fails to load, only the background is drawn:
+ *
+ * 1. a node compatible with "boot-logo" under ``/chosen`` in the device tree,
+ *    carrying the BMP itself or pointing at a reserved memory region the
+ *    bootloader loaded it into, if that region can be mapped (see
+ *    Documentation/devicetree/bindings/display/boot-logo.yaml);
+ * 2. the EFI BGRT, the image the firmware showed;
+ * 3. the BMP named by CONFIG_DRM_CLIENT_SPLASH_BMP_NAME, ``drm_splash.bmp`` by
+ *    default, loaded as firmware, for instance built into the kernel with
+ *    CONFIG_EXTRA_FIRMWARE.
+ *
+ * With none of them, only the background is drawn.
+ *
+ * A reserved memory region keeps its contents across a reset, and may even
+ * across a short power cycle, and the kernel cannot tell a stale image from a
+ * fresh one: a bootloader that loads no image there disables the node, or
+ * removes it.
+ *
+ * Placement
+ * ---------
+ *
+ * Everything is given as the screen is seen: once turned as its connector
+ * needs, for a panel mounted turned (the panel's orientation) or as asked
+ * with video=...,rotate=. The plane turns it in hardware when it can, and the
+ * splash turns its buffer in software otherwise, as fbdev does with the
+ * console. A panel mounted turned is described on the panel, not here.
+ *
+ * The image is placed at a position in pixels, where -1 centres it on that
+ * axis, and an offset is added afterwards; the result is clamped so that the
+ * whole image stays on screen. A rotation of 90, 180 or 270 degrees counter
+ * clockwise turns the image and not the screen: position and offset stay in
+ * the same pixels, and a quarter turn only swaps how much room the image
+ * takes up.
+ *
+ * A device tree image is placed and turned as its node says, and any other
+ * image is centred and upright. A BGRT image is the exception to the above: it
+ * is drawn at the table offsets on the screen the firmware drew it on,
+ * unturned but for the table's orientation bits.
+ *
+ * Background
+ * ----------
+ *
+ * The rest of the screen is filled with the node's "background-color" for a
+ * device tree image, and with CONFIG_DRM_CLIENT_SPLASH_BACKGROUND_COLOR
+ * otherwise.
  */
 
 /*
-- 
2.39.5