[PATCH] crypto: caam: jr: Use dedicated shutdown callback

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <festevam@nabladev.com>

The CAAM job ring platform driver uses caam_jr_remove() as its
shutdown callback.

The remove path refuses to shut down a job ring while crypto
consumers still hold references to it. This is necessary during
driver unbinding, but causes the following warning on reboot:

caam_jr 30903000.jr: Device is busy; consumers might start to crash

Unlike driver removal, system shutdown does not require
unregistering crypto algorithms or releasing driver resources.

Introduce a dedicated platform shutdown callback that shuts down
the hardware job ring without checking consumer references.

Keep the reference checks and algorithm unregistration in the
remove path.

Tested on a i.MX8MP custom-board.

Cc: stable@vger.kernel.org 
Fixes: c007e720989e ("crypto: caam/jr - add .shutdown hook")
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
---
 drivers/crypto/caam/jr.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c
index cf725a6ac0fb..75be668b74b8 100644
--- a/drivers/crypto/caam/jr.c
+++ b/drivers/crypto/caam/jr.c
@@ -178,6 +178,15 @@ static int caam_jr_shutdown(struct device *dev)
 	return ret;
 }
 
+static void caam_jr_platform_shutdown(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = caam_jr_shutdown(&pdev->dev);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to shut down job ring: %d\n", ret);
+}
+
 static void caam_jr_remove(struct platform_device *pdev)
 {
 	int ret;
@@ -812,7 +821,7 @@ static struct platform_driver caam_jr_driver = {
 	},
 	.probe       = caam_jr_probe,
 	.remove      = caam_jr_remove,
-	.shutdown    = caam_jr_remove,
+	.shutdown    = caam_jr_platform_shutdown,
 };
 
 static int __init jr_driver_init(void)
-- 
2.43.0