[PATCH v1 0/3] Spacemit K3 enable Linux boot

[E Shattow <e@freeshell.de>]

Adopt some fixes needed for Linux v7.2.10+ boot and enable
BOOTSTD_FULL together with minimal env addr variable defaults.

Build and test only with vendor BSP k3-br-v1.0.10 having reduced
configuration to avoid a memory resource conflict. The vendor BSP SPL
in its default configuration attempts to load opensbi separately from
u-boot main app, and also attempts to load an embedded controller OS
image, neither of which is useful for mainline opensbi, mainline
Linux, and mainline U-Boot. Instructions and supplemental patches for
the reduced vendor BSP build are co-dependent on this series; a
follow-up will be posted with details after this series is sent.

E Shattow (3):
  riscv: dts: spacemit: k3: override reserved status of mimsic and
    maplic
  riscv: dts: spacemit: k3: adopt override to drop M-level IMSIC guest
    props
  configs: spacemit: k3: enable CONFIG_BOOTSTD_FULL

 arch/riscv/dts/spacemit-k3-u-boot.dtsi | 12 ++++++++++++
 configs/spacemit_k3_defconfig          |  9 +--------
 include/configs/spacemit-k3.h          |  6 ++++++
 3 files changed, 19 insertions(+), 8 deletions(-)


base-commit: 03e45557e1f38a39a0c80fe30483130ff376cf92
-- 
2.53.0