From: E Shattow <e@freeshell.de>
To: u-boot@lists.u-boot-project.org
Cc: E Shattow <e@freeshell.de>
Subject: [DNM PATCH v1 6/7] reduced SpacemiT K3 vendor BSP: add UART (no SPI) defconfig
Date: Wed, 28 Oct 2026 17:15:54 -0700 [thread overview]
Message-ID: <20261029001555.1890775-7-e@freeshell.de> (raw)
In-Reply-To: <20261029001555.1890775-1-e@freeshell.de>
Do Not Merge
Informational purpose only, to aid mainline development of SpacemiT K3
support.
Drop QSPI SPI MTD CLK and RESET as a new defconfig
---
configs/spacemit_k3_uart_nospi_defconfig | 44 ++++++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 configs/spacemit_k3_uart_nospi_defconfig
diff --git a/configs/spacemit_k3_uart_nospi_defconfig b/configs/spacemit_k3_uart_nospi_defconfig
new file mode 100644
index 000000000000..9a8c5cb18406
--- /dev/null
+++ b/configs/spacemit_k3_uart_nospi_defconfig
@@ -0,0 +1,44 @@
+CONFIG_RISCV=y
+CONFIG_SYS_TEXT_BASE=0x102000000
+CONFIG_SYS_MALLOC_LEN=0x1000000
+CONFIG_SYS_MALLOC_F_LEN=0x80000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x4000
+CONFIG_DEFAULT_DEVICE_TREE="k3_spl"
+CONFIG_SPL_TEXT_BASE=0xc0801000
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SPL_SIZE_LIMIT=0x72F00
+CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0x102000000
+CONFIG_TARGET_SPACEMIT_K3=y
+CONFIG_SPL_OPENSBI_LOAD_ADDR=0x100000000
+CONFIG_K3_BOARD_ASIC=y
+CONFIG_ARCH_RV64I=y
+CONFIG_RISCV_SMODE=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x102300000
+CONFIG_STACK_SIZE=0x100000
+CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x140000000
+CONFIG_LOGLEVEL=6
+CONFIG_SPL_MAX_SIZE=0x70F00
+CONFIG_SPL_PAD_TO=0x0
+CONFIG_SPL_BSS_START_ADDR=0xc0874000
+CONFIG_SPL_BSS_MAX_SIZE=0x3000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xc0880000
+CONFIG_SPL_CRC32=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_CMD_TLV_EEPROM=y
+CONFIG_DM_I2C=y
+# CONFIG_SPL_DM_I2C is not set
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SPL_SYS_I2C_SPACEMIT=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_NS16550=y
+CONFIG_SYS_NS16550_IER=0x40
+CONFIG_TIMER_EARLY=y
+CONFIG_SPL_LZO=y
--
2.53.0
next prev parent reply other threads:[~2026-10-29 0:17 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-29 0:15 [DNM v1 0/7] Guide to build reduced SpacemiT K3 vendor BSP E Shattow
2026-10-29 0:15 ` [DNM PATCH v1 1/7] reduced SpacemiT K3 vendor BSP: use MKIMAGE build env E Shattow
2026-10-29 0:15 ` [DNM PATCH v1 2/7] reduced SpacemiT K3 vendor BSP: add guards around config optioned k3.c code E Shattow
2026-10-29 0:15 ` [DNM PATCH v1 3/7] reduced SpacemiT K3 vendor BSP: add fallback fastboot buf addr and size def E Shattow
2026-10-29 0:15 ` [DNM PATCH v1 4/7] reduced SpacemiT K3 vendor BSP: force UART boot when YMODEM_SUPPORT enabled E Shattow
2026-10-29 0:15 ` [DNM PATCH v1 5/7] reduced SpacemiT K3 vendor BSP: add UART SPI defconfig E Shattow
2026-10-29 0:15 ` E Shattow [this message]
2026-10-29 0:15 ` [DNM PATCH v1 7/7] reduced SpacemiT K3 vendor BSP: set uart compatible for mainline OpenSBI E Shattow
2026-10-29 0:33 ` [DNM v1 0/7] Guide to build reduced SpacemiT K3 vendor BSP (continued) E Shattow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261029001555.1890775-7-e@freeshell.de \
--to=e@freeshell.de \
--cc=u-boot@lists.u-boot-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.